| Reseller | Il numero della parte | Produttore elettronici | Spiegazioni elettronici | Price | Qty.
BuyNow |
Avnet Americas | CST0612-FC-R0015E
 | Bourns Inc | - Product that comes on tape, but is not reeled (Alt: 78Y9864)
RoHS : Not Compliant | 2,500 : $0.347
1,000 : $0.356
500 : $0.419
250 : $0.456
100 : $0.514
25 : $0.568
1 : $1.1
|
| 0
 |
TNA10DCR0-01B
| ITT Interconnect Solutions | Connector Accessories Receptacle Dust Cap Bulk - Bulk (Alt: TNA10DCR0-01B)
RoHS : Not Compliant | 10,000 : $3.0184
5,000 : $3.09677
2,500 : $3.47368
500 : $3.93289
200 : $4.45946
|
| 0
 |
TNA14DCR0-01B
| ITT Interconnect Solutions | - Bulk (Alt: TNA14DCR0-01B)
RoHS : Not Compliant | 10,000 : $4.6176
5,000 : $4.64165
2,500 : $4.86842
500 : $5.51678
200 : $6.24324
|
| 0
|
TNA18DCR0-01B
| ITT Interconnect Solutions | - Bulk (Alt: TNA18DCR0-01B)
RoHS : Not Compliant | 10,000 : $7.2226
5,000 : $7.25945
2,500 : $7.2963
500 : $7.33315
200 : $8.02703
|
| 0
|
TNA16DCR0-01B
| ITT Interconnect Solutions | - Bulk (Alt: TNA16DCR0-01B)
RoHS : Not Compliant | 10,000 : $6.12743
5,000 : $6.15934
2,500 : $6.19126
500 : $6.2953
200 : $7.13514
|
| 0
|
CST0612-FC-R0015E
| Bourns Inc | - Tape and Reel (Alt: CST0612-FC-R0015E)
RoHS : Not Compliant | 64,000 : $0.3125
32,000 : $0.32051
16,000 : $0.32895
8,000 : $0.33784
4,000 : $0.35714
|
| 0
|
TNA20DCR0-01B
| ITT Interconnect Solutions | - Bulk (Alt: TNA20DCR0-01B)
RoHS : Not Compliant | 10,000 : $8.0262
5,000 : $8.06715
2,500 : $8.1081
500 : $8.14905
200 : $8.91892
|
| 0
|
TNA22DCR0-01B
| ITT Interconnect Solutions | - Bulk (Alt: TNA22DCR0-01B)
RoHS : Not Compliant | 10,000 : $8.8298
5,000 : $8.87485
2,500 : $8.9199
500 : $8.96495
200 : $9.81081
|
| 0
|
CST0612-FC-R001E
| Bourns Inc | SMD Current Sense Resistor, 0.001 ohm, CST0612 Series, 0612 [1632 Metric], 1 W, ? 1% - Tape and Reel (Alt: CST0612-FC-R001E)
RoHS : Compliant | 64,000 : $0.32175
32,000 : $0.32341
16,000 : $0.32895
8,000 : $0.33784
4,000 : $0.35714
|
| 0
|
TNA12DCR0-01B
| ITT Interconnect Solutions | - Bulk (Alt: TNA12DCR0-01B)
RoHS : Not Compliant | 10,000 : $4.8288
5,000 : $4.85395
2,500 : $4.8791
500 : $5.5185
200 : $5.5468
|
| 0
|
Newark | CST0612-FC-R001E
| Bourns Inc | Fixed Resistors Surface Mount Current Se; |Bourns, Inc. CST0612-FC-R001E
RoHS : Compliant | 1 : $1.29
25 : $0.647
100 : $0.583
250 : $0.512
500 : $0.468
1,000 : $0.422
5,000 : $0.416
|
| 4,000
|
TNA14DCR0-01B
| ITT Interconnect Solutions | Dust Cap, Size 14; |Itt Cannon TNA14DCR0-01B
RoHS : Compliant | 1 : $8.88
5 : $8.25
10 : $7.61
25 : $7.15
50 : $6.83
100 : $6.52
250 : $6.39
|
| 278
|
CST0612-FC-R001E
| Bourns Inc | Curr Sense Res Smd, 0R001, 1W; |Bourns, Inc. CST0612-FC-R001E
RoHS : Compliant | 10 : $0.905
20 : $0.807
30 : $0.709
50 : $0.677
100 : $0.645
250 : $0.574
500 : $0.53
1,000 : $0.493
|
| 245
|
CST0612-FC-R001E
| Bourns Inc | Curr Sense Res Smd, 0R001, 1W; |Bourns, Inc. CST0612-FC-R001E
RoHS : Compliant | 100 : $0.645
250 : $0.574
500 : $0.53
1,000 : $0.493
|
| 245
|
KRL6432E-C-R001-J-T1
| Susumu Co Ltd | Curr Sense Res Smd, 0R001, 3W, 2512 Wide; |Susumu KRL6432E-C-R001-J-T1
RoHS : Compliant | 1 : $1.08
25 : $0.541
100 : $0.5
250 : $0.458
500 : $0.434
1,000 : $0.376
5,000 : $0.364
|
| 201
|
KRL6432E-C-R001-J-T1
| Susumu Co Ltd | Curr Sense Res Smd, 0R001, 3W, 2512 Wide; |Susumu KRL6432E-C-R001-J-T1
RoHS : Compliant | 1 : $1.08
25 : $0.541
100 : $0.5
250 : $0.458
500 : $0.434
1,000 : $0.376
5,000 : $0.364
|
| 201
|
LSCR001
| Littelfuse Inc | Fuse Block, 450A; |Littelfuse LSCR001
RoHS : Compliant | 1 : $43.08
5 : $36.15
10 : $33.53
25 : $29.84
100 : $26.15
500 : $21.99
1,000 : $21.55
|
| 192
|
TCR001
| Platinum Tools | No. 1 Coax Rf Remote, Analyzer; Accessory Type:No. 1 Coax Rf Remote; For Use With:Platinum Tools Coax Clarifier Network Analyzer; Product Range:Coax Clarifier Series |Platinum Tools TCR001
RoHS : Not Compliant | | 18
|
FM-W75CR001
| Fairview Microwave Inc | Wr-75 Waveguide Circulator With 20 Db Mi; |Fairview Microwave FM-W75CR001
RoHS : Not Compliant | | 3
|
FM-W42CR001
| Fairview Microwave Inc | Wr-42 Waveguide Circulator 18 Db Min Iso; |Fairview Microwave FM-W42CR001
RoHS : Not Compliant | | 3
|
FM-W10CR001
| Fairview Microwave Inc | Wr-10 Waveguide Circulator With 15 Db Mi; |Fairview Microwave FM-W10CR001
RoHS : Not Compliant | | 1
|
FM-W34CR001
| Fairview Microwave Inc | Wr-34 Waveguide Circulator With 18 Db Mi; |Fairview Microwave FM-W34CR001
RoHS : Not Compliant | | 1
|
FM-W12CR001
| Fairview Microwave Inc | Wr-12 Waveguide Circulator With 15 Db Mi; |Fairview Microwave FM-W12CR001
RoHS : Not Compliant | | 1
|
FM-W22CR001
| Fairview Microwave Inc | Wr-22 Waveguide Circulator With 15 Db Mi; |Fairview Microwave FM-W22CR001
RoHS : Not Compliant | | 1
|
FM-W51CR001
| Fairview Microwave Inc | Wr-51 Waveguide Circulator With 18 Db Mi; |Fairview Microwave FM-W51CR001
RoHS : Not Compliant | | 1
|
RS | TGHGCR0010FE
| Ohmite Mfg Co | RESISTOR, THICK FILM, RES 0.001 OHMS, 100 W, TOL 1%, SMT, SOT-227, CURR-SENSE
RoHS : Compliant | | 25
|
LSCR001
| Littelfuse Inc | FUSE BLOCK, LSCR SERIES, CHASIS MOUNT, 1/4" SUD MOUNT, 600A, 400A, STEEL
RoHS : Compliant | 1 : $47.62
10 : $45.24
25 : $42.86
50 : $40.48
|
| 14
|
TCR001
| Platinum Tools | NO. 1 COAX RF REMOTE. CLAMSHELL. | | 0
|
SS5V3-ICR001
| SMC Corporation of America | SS5V3 MANIFOLD SV3000, SV SERIES | | 0
|
6FX80022CR001AC0
| Siemens | CABLE, SIGNAL, PREFAB, TRAILING, MC800+,02M ; 79.46 | | 0
|
6FX50022CR001BF0
| Siemens | SIGNAL CABLE, PREFAB, MC500,15M ; 125.28 | | 0
|
6FX50022CR001GA0
| Siemens | SIGNAL CABLE. PREASSEMBLED ; 301.60 | | 0
|
6FX50022CR001CA0
| Siemens | SIGNAL CABLE, PREASSEMBLED, MC500,20M ; 145.00 | | 0
|
6FX80022CR001EA0
| Siemens | SIGNAL CABLE PREASSAMBLED ; 252.30 | | 0
|
6FX80022CR001CE0
| Siemens | SIGNAL CABLE PREASSAMBLED ; 179.22 | | 0
|
192900-0383 (TNA24DCR001B)
| ITT Interconnect Solutions | IP65 48 WAY QM MULTIPOLE DUST CAP | 200 : $12.42
1,000 : $11.43
|
| 0
|
192900-0382 (TNA22DCR001B)
| ITT Interconnect Solutions | IP65 35 WAY QM MULTIPOLE DUST CAP | 200 : $13.22
1,000 : $12.17
2,000 : $10.58
|
| 0
|
192900-0379 (TNA16DCR001B)
| ITT Interconnect Solutions | ITT CANNON MALE DUST CAP, SHELL SIZE 16 IP67 RATED | 200 : $10.39
1,000 : $9.56
2,000 : $8.31
|
| 0
|
RSCA200-VB-1-9-V (RCR-00104973 | RSCA200-VB-1-9-V | RSCA200VB19V)
| Carling Technologies | ROCKER SWITCH;SINGLE POLE;ROCKER AND PADDLE ACTUATOR;R/RSC SERIES | | 0
|
RSCB200-VB-B-0-V (RCR-00102979 | RSCB200-VB-B-0-V | RSCB200VBB0V)
| Carling Technologies | ROCKER SWITCH;SINGLE POLE;ROCKER AND PADDLE ACTUATOR;R/RSC SERIES | | 0
|
Sager | LSCR001
| Littelfuse Inc | ACS 700V SEMICONDUCTOR BLOCK 400A
RoHS : Compliant | 1 : $31.5
6 : $28.64
16 : $26.69
32 : $25.4
63 : $24.23
127 : $23.51
|
| 34
|
WPB1320S3CR-001
| TE Connectivity | TE Connectivity | | 0
|
WPB4701S5CR-001
| TE Connectivity | TE Connectivity | | 0
|
WPB4501S3CR-001
| TE Connectivity | TE Connectivity | | 0
|
WPB132S3CR-001
| TE Connectivity | TE Connectivity | | 0
|
WPB1440S3CR-001
| TE Connectivity | TE Connectivity | | 0
|
WPB4701S3CR-001
| TE Connectivity | TE Connectivity | | 0
|
WPB8060S5CR-001
| TE Connectivity | TE Connectivity | | 0
|
WPB7600S3CR-001
| TE Connectivity | TE Connectivity | | 0
|
WPB8961S5CR-001
| TE Connectivity | TE Connectivity | | 0
|
TME | LRMAP3920C-R001FT
| TT Electronics plc | Resistor: thick film; 1mΩ; SMD; 3921; 5W; ±1%; 10x5.2x1.5mm | | 57,000
|
LRMAP3920C-R0015FT
| TT Electronics plc | Resistor: thick film; 1.5mΩ; SMD; 3921; 5W; 10x5.2x1.5mm; -55÷170°C | 1,900 : $0.418
170 : $0.514
|
| 12,350
|
CR0012
| Logilink | Card reader: memory; internal supplied; black | 5 : $8.42
3 : $9.06
1 : $10.36
|
| 3
|
DN-CR-001
| Digitus | Rack for unwinding cables from drums; 600x400x100mm | | 2
|
LRMAP5930C-R001FT
| TT Electronics plc | Resistor: thick film; 1mΩ; SMD; 1W; -55÷170°C; 50ppm/°C | | 0
|
LSCR001
| Littelfuse Inc | Fuse base; 400A; 700VAC; 1.5kVDC; on panel; UL94V-0
RoHS : Compliant | 50 : $26.37
25 : $27.31
10 : $30.32
5 : $32.45
3 : $33.72
1 : $35.51
|
| 0
|
Chip 1 Exchange | RLM25FECR001
| TA-I Technology Co Ltd | INSTOCK
RoHS : Compliant | | 593
|
RLM25FECR001
| | INSTOCK | | 25
|
Avnet Abacus | TNA18DCR001B
| ITT Interconnect Solutions | (Alt: TNA18DCR001B)
RoHS : Compliant | | 0
|
TNA16DCR001B
| ITT Interconnect Solutions | Connector Accessories Dust Cap Bulk (Alt: 192900-0379)
RoHS : Compliant | | 0
|
TNA10DCR0-01B
| ITT Interconnect Solutions | Connector Accessories Receptacle Dust Cap Bulk (Alt: 192900-0376)
RoHS : Compliant | | 0
|
TNA14DCR0-01B
| ITT Interconnect Solutions | (Alt: 192900-0378)
RoHS : Compliant | | 0
|
TNA18DCR0-01B
| ITT Interconnect Solutions | (Alt: 192900-0380)
RoHS : Compliant | | 0
|
TNA12DCR0-01B
| ITT Interconnect Solutions | (Alt: 192900-0377)
RoHS : Compliant | | 0
|
TNA24DCR0-01B
| ITT Interconnect Solutions | (Alt: 192900-0383)
RoHS : Compliant | | 0
|
TNA22DCR0-01B
| ITT Interconnect Solutions | Connector Accessories Dust Cap Plastic Shell Size 22 Bulk (Alt: 192900-0382)
RoHS : Compliant | | 0
|
CST0612-FC-R001E
| Bourns Inc | SMD Current Sense Resistor 0001 ohm CST0612 Series 0612 1632 Metric 1 W 1 - Tape and Reel (Alt: CST0612-FC-R001E)
RoHS : Compliant | | 0
|
CST0612-FC-R0015E
| Bourns Inc | SMD Current Sense Resistor 00015 ohm CST0612 Series 0612 1632 Metric 1 W 1 - Tape and Reel (Alt: CST0612-FC-R0015E)
RoHS : Compliant | | 0
|
Braemac Americas-Symmetry | WE310F5I20CR001000
| Telit | WE310F5-I (Wi-Fi b/g/n + BLE) 39.02.012 | | 0
|
WE310F5P20CR001000
| Telit | WE310F5-P (Wi-Fi b/g/n + BLE) 39.02.012 | | 0
|
Master Electronics | CST0612-FC-R0015E
| Bourns Inc | Res Metal Alloy 0612 0.0015 Ohm 1% 1W ±200ppm/°C Wide Terminal SMD Automotive Medical T/R
RoHS : Compliant | 52,000 : $0.2775
28,000 : $0.2782
16,000 : $0.2809
12,000 : $0.2816
8,000 : $0.2851
4,000 : $0.2908
1,000 : $0.3063
|
| 3,000
|
TNA12DCR0-01B
| ITT Interconnect Solutions | Connector Accessories Receptacle Dust Cap Bulk
RoHS : Compliant | 5,000 : $5.91
2,500 : $5.92
1,000 : $5.94
500 : $6.19
300 : $6.42
100 : $6.63
25 : $7.25
5 : $10.37
|
| 463
|
TNA16DCR0-01B
| ITT Interconnect Solutions | The TNA16DCR0-01B is a sealed dust cap receptacle accessory with a shell size of 16 for the Cannon Trident connector series.
RoHS : Compliant | 200 : $6.55
150 : $6.69
100 : $8.45
50 : $13.73
25 : $13.76
10 : $13.8
5 : $13.83
|
| 360
|
TGHGCR0010DE
| Ohmite Mfg Co | Resistor - Current Sense - 100W SOT-277 - 0.001 Ohm 1% - 4 Screw Terminals - Bolt-On
RoHS : Compliant | 250 : $28.87
100 : $30.43
50 : $33.96
30 : $34.15
10 : $38.49
5 : $39.26
1 : $55.64
|
| 100
|
TNA10DCR0-01B
| ITT Interconnect Solutions | Connector Accessories Receptacle Dust Cap Bulk
RoHS : Compliant | 5,000 : $3.08
2,500 : $3.43
1,000 : $3.91
500 : $4.01
300 : $4.71
100 : $4.93
25 : $5.32
5 : $6.35
|
| 0
|
RCR-00116555
| Carling Technologies | RSC-SERIES ROCKER SWITCH
RoHS : Compliant | 10,000 : $1.89
7,500 : $1.9
5,000 : $1.92
2,500 : $1.97
1,000 : $2.03
500 : $2.14
300 : $2.21
100 : $2.83
|
| 0
|
TNA14DCR0-01B
| ITT Interconnect Solutions | Connector Accessories Receptacle Dust Cap Bulk
RoHS : Compliant | 2,500 : $4.81
1,000 : $5.48
500 : $5.63
300 : $6.33
100 : $6.9
50 : $7.2
25 : $7.22
5 : $8.88
|
| 0
|
TNA18DCR0-01B
| ITT Interconnect Solutions | Connector Accessories Receptacle Dust Cap Bulk
RoHS : Compliant | 200 : $7.37
150 : $7.52
100 : $9.5
50 : $15.44
|
| 0
|
RCR-00113293
| Carling Technologies | R-SERIES ROCKER SWITCH
RoHS : Compliant | 10,000 : $1.89
7,500 : $1.9
5,000 : $1.92
2,500 : $1.97
1,000 : $2.03
500 : $2.14
300 : $2.21
100 : $2.83
|
| 0
|
RCR-00115068
| Carling Technologies | RSC-SERIES ROCKER SWITCH
RoHS : Compliant | 10,000 : $1.89
7,500 : $1.9
5,000 : $1.92
2,500 : $1.97
1,000 : $2.03
500 : $2.14
300 : $2.21
100 : $2.83
|
| 0
|
RCR-00118074
| Carling Technologies | R-SERIES ROCKER SWITCH
RoHS : Compliant | 10,000 : $1.89
7,500 : $1.9
5,000 : $1.92
2,500 : $1.97
1,000 : $2.03
500 : $2.14
300 : $2.21
100 : $2.83
|
| 0
|
RCR-00108815
| Carling Technologies | RSC-SERIES ROCKER SWITCH
RoHS : Compliant | 10,000 : $1.78
7,500 : $1.79
5,000 : $1.82
2,500 : $1.87
1,000 : $1.92
500 : $2.03
300 : $2.09
100 : $2.68
|
| 0
|
RCR-00108594
| Carling Technologies | RSC-SERIES ROCKER SWITCH
RoHS : Compliant | 10,000 : $1.89
7,500 : $1.9
5,000 : $1.92
2,500 : $1.97
1,000 : $2.03
500 : $2.14
300 : $2.21
100 : $2.83
|
| 0
|
RCR-00108084
| Carling Technologies | RSC-SERIES ROCKER SWITCH
RoHS : Compliant | 5,000 : $2.14
2,500 : $2.2
1,000 : $2.26
500 : $2.35
300 : $2.46
100 : $3.14
50 : $3.15
10 : $3.88
|
| 0
|
RCR-00115818
| Carling Technologies | RSC-SERIES ROCKER SWITCH
RoHS : Compliant | 5,000 : $2.18
2,500 : $2.24
1,000 : $2.3
500 : $2.4
300 : $2.43
100 : $3.21
50 : $3.22
10 : $3.96
|
| 0
|
Pasternack Enterprises US | PE-W51CR001
| Pasternack Enterprises | Key Specifications. Minimum Frequency: 14.5 GHz Maximum Frequency: 22 GHz Waveguide size: WR-51 VSWR(Max): 1.3:1 Insertion Loss: 0.3 dB Isolation (min) : 18 dB Forward Power (CW)(Max): 50 Watts Input Power (Peak): 1 KWatts. WR-51 Waveguide Circulator, 14.5 GHz to 22 GHz, 18 dB min Isolation, Cover Flange, Aluminum. The PE-W51CR001 is a Waveguide Circulator offering 18 dB minimum isolation over the K band frequency range of 14.5 to 22 GHz. The design achieves high isolation with wide band performance and the WR-51 waveguide uses UG Square Cover compatible flanges on all ports and has a power rating of 50 watts (CW). Pasternack offers a wide variety of circulators and waveguide circulators to fit your needs. These unique devices enable two signals to use one channel. The classic use of this three port device is for the line between an antenna and a transceiver, allowing the receive signal to come from the antenna (port 1) to the receiver (port 2) while the transmit signal goes from the transmitter (port 3) to the antenna (port 1). An isolator can be created by terminating one port into a matched load. These components can be used in antenna transmitting and receiving, radar, amplifier systems and anything that requires isolation from a signal reflection and the ability to send signals in opposite directions down a single channel. These circulators feature excellent insertion loss, high isolation and reliability. | 1 : $1,570.0
5 : $1,507.2
10 : $1,444.4
25 : $1,381.6
|
| 3
|
PE-W62CR001
| Pasternack Enterprises | Key Specifications. Minimum Frequency: 11.9 GHz Maximum Frequency: 18 GHz Waveguide size: WR-62 VSWR(Max): 1.25:1 Insertion Loss: 0.3 dB Isolation (min) : 20 dB Forward Power (CW)(Max): 50 Watts Input Power (Peak): 2 KWatts. WR-62 Waveguide Circulator, 11.9 GHz to 18 GHz, 20 dB min Isolation, Cover Flange, Aluminum. The PE-W62CR001 is a Waveguide Circulator offering 20 dB minimum isolation over the Ku band frequency range of 11.9 to 18 GHz. The design achieves high isolation with wide band performance and the WR-62 waveguide uses UG Square Cover compatible flanges on all ports and has a power rating of 50 watts (CW). Pasternack offers a wide variety of circulators and waveguide circulators to fit your needs. These unique devices enable two signals to use one channel. The classic use of this three port device is for the line between an antenna and a transceiver, allowing the receive signal to come from the antenna (port 1) to the receiver (port 2) while the transmit signal goes from the transmitter (port 3) to the antenna (port 1). An isolator can be created by terminating one port into a matched load. These components can be used in antenna transmitting and receiving, radar, amplifier systems and anything that requires isolation from a signal reflection and the ability to send signals in opposite directions down a single channel. These circulators feature excellent insertion loss, high isolation and reliability. | 1 : $1,570.0
5 : $1,507.2
10 : $1,444.4
25 : $1,381.6
|
| 3
|
PE-W12CR001
| Pasternack Enterprises | Key Specifications. Minimum Frequency: 64.5 GHz Maximum Frequency: 66.5 GHz Waveguide size: WR-12 VSWR(Max): 1.4:1 Insertion Loss: 0.8 dB Isolation (min) : 15 dB Forward Power (CW)(Max): 2 Watts Input Power (Peak): 20 Watts. WR-12 Waveguide Circulator, 64.5 GHz to 66.5 GHz, 15 dB min Isolation, UG-387/U Cover Flange, Brass. The PE-W12CR001 is a Waveguide Circulator offering 15 dB minimum isolation over the E band frequency range of 64.5 to 66.5 GHz. The design achieves high isolation with wide band performance and the WR-12 waveguide uses UG-387/U compatible flanges on all ports and has a power rating of 2 watts (CW). Pasternack offers a wide variety of circulators and waveguide circulators to fit your needs. These unique devices enable two signals to use one channel. The classic use of this three port device is for the line between an antenna and a transceiver, allowing the receive signal to come from the antenna (port 1) to the receiver (port 2) while the transmit signal goes from the transmitter (port 3) to the antenna (port 1). An isolator can be created by terminating one port into a matched load. These components can be used in antenna transmitting and receiving, radar, amplifier systems and anything that requires isolation from a signal reflection and the ability to send signals in opposite directions down a single channel. These circulators feature excellent insertion loss, high isolation and reliability. | 1 : $3,930.0
5 : $3,772.8
10 : $3,615.6
25 : $3,458.4
|
| 2
|
PE83CR001
| Pasternack Enterprises | Key Specifications, Connector In Series: SMA, Connector In Gender: Female, Connector Out Series: SMA, Minimum Frequency: 700 MHz, Maximum Frequency: 800 MHz, Impedance: 50 Ohm, Maximum Input Power: 10 Watts, Minimum Isolation: 18 dB. Circulator with 18 dB Isolation from 700 MHz to 800 MHz, 10 Watts and SMA Female. RF circulator PE83CR001 from Pasternack is part of our extensive in-stock RF, microwave and millimeter wave components available for purchase. This RF circulator is manufactured with SMA connectors that are female. Our SMA circulator has a minimum frequency of 700 MHz and a maximum frequency of 800 MHz. This SMA coaxial circulator has a minimum isolation of 18 dB and a maximum input power of 10 Watts. PE83CR001 coaxial SMA circulator is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. Our radio frequency circulator can be bought and shipped worldwide the same-day as with our other in-stock RF parts. | 1 : $164.99
10 : $158.39
25 : $151.79
|
| 2
|
PE-W10CR001
| Pasternack Enterprises | Key Specifications. Minimum Frequency: 82.2 GHz Maximum Frequency: 84.2 GHz Waveguide size: WR-10 VSWR(Max): 1.5:1 Insertion Loss: 1 dB Isolation (min) : 15 dB Forward Power (CW)(Max): 0.5 Watts Input Power (Peak): 20 Watts. WR-10 Waveguide Circulator, 82.2 GHz to 84.2 GHz, 15 dB min Isolation, UG-387/U-M Cover Flange, Brass. The PE-W10CR001 is a Waveguide Circulator offering 15 dB minimum isolation over the W band frequency range of 82.2 to 84.2 GHz. The design achieves high isolation with wide band performance and the WR-10 waveguide uses UG-387/U-M compatible flanges on all ports and has a power rating of 0.5 watts (CW). Pasternack offers a wide variety of circulators and waveguide circulators to fit your needs. These unique devices enable two signals to use one channel. The classic use of this three port device is for the line between an antenna and a transceiver, allowing the receive signal to come from the antenna (port 1) to the receiver (port 2) while the transmit signal goes from the transmitter (port 3) to the antenna (port 1). An isolator can be created by terminating one port into a matched load. These components can be used in antenna transmitting and receiving, radar, amplifier systems and anything that requires isolation from a signal reflection and the ability to send signals in opposite directions down a single channel. These circulators feature excellent insertion loss, high isolation and reliability. | 1 : $3,930.0
5 : $3,772.8
10 : $3,615.6
25 : $3,458.4
|
| 2
|
PE-W15CR001
| Pasternack Enterprises | Key Specifications. Minimum Frequency: 61 GHz Maximum Frequency: 65 GHz Waveguide size: WR-15 VSWR(Max): 1.4:1 Insertion Loss: 0.6 dB Isolation (min) : 15 dB Forward Power (CW)(Max): 5 Watts Input Power (Peak): 30 Watts. WR-15 Waveguide Circulator, 61 GHz to 65 GHz, 15 dB min Isolation, UG-385/U Cover Flange, Brass. The PE-W15CR001 is a Waveguide Circulator offering 15 dB minimum isolation over the V band frequency range of 61 to 65 GHz. The design achieves high isolation with wide band performance and the WR-15 waveguide uses UG-385/U compatible flanges on all ports and has a power rating of 5 watts (CW). Pasternack offers a wide variety of circulators and waveguide circulators to fit your needs. These unique devices enable two signals to use one channel. The classic use of this three port device is for the line between an antenna and a transceiver, allowing the receive signal to come from the antenna (port 1) to the receiver (port 2) while the transmit signal goes from the transmitter (port 3) to the antenna (port 1). An isolator can be created by terminating one port into a matched load. These components can be used in antenna transmitting and receiving, radar, amplifier systems and anything that requires isolation from a signal reflection and the ability to send signals in opposite directions down a single channel. These circulators feature excellent insertion loss, high isolation and reliability. | 1 : $3,560.0
5 : $3,417.6
10 : $3,275.2
25 : $3,132.8
|
| 2
|
PE-W137CR001
| Pasternack Enterprises | Key Specifications. Minimum Frequency: 5.38 GHz Maximum Frequency: 8.17 GHz Waveguide size: WR-137 VSWR(Max): 1.35:1 Insertion Loss: 0.4 dB Isolation (min) : 17 dB Forward Power (CW)(Max): 150 Watts Input Power (Peak): 10 KWatts. WR-137 Waveguide Circulator, 5.38 GHz to 8.17 GHz, 17 dB min Isolation, CPR137F Flange, Aluminum. The PE-W137CR001 is a Waveguide Circulator offering 17 dB minimum isolation over the C band frequency range of 5.38 to 8.17 GHz. The design achieves high isolation with wide band performance and the WR-137 waveguide uses CPR137F compatible flanges on all ports and has a power rating of 150 watts (CW). Pasternack offers a wide variety of circulators and waveguide circulators to fit your needs. These unique devices enable two signals to use one channel. The classic use of this three port device is for the line between an antenna and a transceiver, allowing the receive signal to come from the antenna (port 1) to the receiver (port 2) while the transmit signal goes from the transmitter (port 3) to the antenna (port 1). An isolator can be created by terminating one port into a matched load. These components can be used in antenna transmitting and receiving, radar, amplifier systems and anything that requires isolation from a signal reflection and the ability to send signals in opposite directions down a single channel. These circulators feature excellent insertion loss, high isolation and reliability. | 1 : $1,970.0
5 : $1,891.2
10 : $1,812.4
25 : $1,733.6
|
| 2
|
PE-W42CR001
| Pasternack Enterprises | Key Specifications. Minimum Frequency: 17.6 GHz Maximum Frequency: 26.7 GHz Waveguide size: WR-42 VSWR(Max): 1.3:1 Insertion Loss: 0.3 dB Isolation (min) : 18 dB Forward Power (CW)(Max): 30 Watts Input Power (Peak): 500 Watts. WR-42 Waveguide Circulator, 17.6 GHz to 26.7 GHz, 18 dB min Isolation, Cover Flange, Aluminum. The PE-W42CR001 is a Waveguide Circulator offering 18 dB minimum isolation over the K band frequency range of 17.6 to 26.7 GHz. The design achieves high isolation with wide band performance and the WR-42 waveguide uses UG Square Cover compatible flanges on all ports and has a power rating of 30 watts (CW). Pasternack offers a wide variety of circulators and waveguide circulators to fit your needs. These unique devices enable two signals to use one channel. The classic use of this three port device is for the line between an antenna and a transceiver, allowing the receive signal to come from the antenna (port 1) to the receiver (port 2) while the transmit signal goes from the transmitter (port 3) to the antenna (port 1). An isolator can be created by terminating one port into a matched load. These components can be used in antenna transmitting and receiving, radar, amplifier systems and anything that requires isolation from a signal reflection and the ability to send signals in opposite directions down a single channel. These circulators feature excellent insertion loss, high isolation and reliability. | 1 : $1,640.0
5 : $1,574.4
10 : $1,508.8
25 : $1,443.2
|
| 1
|
PE-W75CR001
| Pasternack Enterprises | Key Specifications. Minimum Frequency: 9.84 GHz Maximum Frequency: 15 GHz Waveguide size: WR-75 VSWR(Max): 1.25:1 Insertion Loss: 0.3 dB Isolation (min) : 20 dB Forward Power (CW)(Max): 100 Watts Input Power (Peak): 3 KWatts. WR-75 Waveguide Circulator, 9.84 GHz to 15 GHz, 20 dB min Isolation, Cover Flange, Aluminum. The PE-W75CR001 is a Waveguide Circulator offering 20 dB minimum isolation over the X band frequency range of 9.84 to 15 GHz. The design achieves high isolation with wide band performance and the WR-75 waveguide uses UG Square Cover compatible flanges on all ports and has a power rating of 100 watts (CW). Pasternack offers a wide variety of circulators and waveguide circulators to fit your needs. These unique devices enable two signals to use one channel. The classic use of this three port device is for the line between an antenna and a transceiver, allowing the receive signal to come from the antenna (port 1) to the receiver (port 2) while the transmit signal goes from the transmitter (port 3) to the antenna (port 1). An isolator can be created by terminating one port into a matched load. These components can be used in antenna transmitting and receiving, radar, amplifier systems and anything that requires isolation from a signal reflection and the ability to send signals in opposite directions down a single channel. These circulators feature excellent insertion loss, high isolation and reliability. | 1 : $1,570.0
5 : $1,507.2
10 : $1,444.4
25 : $1,381.6
|
| 1
|
PE-W22CR001
| Pasternack Enterprises | Key Specifications. Minimum Frequency: 32.9 GHz Maximum Frequency: 40 GHz Waveguide size: WR-22 VSWR(Max): 1.4:1 Insertion Loss: 0.4 dB Isolation (min) : 15 dB Forward Power (CW)(Max): 5 Watts Input Power (Peak): 50 Watts. WR-22 Waveguide Circulator, 32.9 GHz to 40 GHz, 15 dB min Isolation, UG-383/U Cover Flange, Brass. The PE-W22CR001 is a Waveguide Circulator offering 15 dB minimum isolation over the Q band frequency range of 32.9 to 40 GHz. The design achieves high isolation with wide band performance and the WR-22 waveguide uses UG-383/U compatible flanges on all ports and has a power rating of 5 watts (CW). Pasternack offers a wide variety of circulators and waveguide circulators to fit your needs. These unique devices enable two signals to use one channel. The classic use of this three port device is for the line between an antenna and a transceiver, allowing the receive signal to come from the antenna (port 1) to the receiver (port 2) while the transmit signal goes from the transmitter (port 3) to the antenna (port 1). An isolator can be created by terminating one port into a matched load. These components can be used in antenna transmitting and receiving, radar, amplifier systems and anything that requires isolation from a signal reflection and the ability to send signals in opposite directions down a single channel. These circulators feature excellent insertion loss, high isolation and reliability. | 1 : $3,560.0
5 : $3,417.6
10 : $3,275.2
25 : $3,132.8
|
| 1
|
PE-W34CR001
| Pasternack Enterprises | Key Specifications. Minimum Frequency: 21.7 GHz Maximum Frequency: 33 GHz Waveguide size: WR-34 VSWR(Max): 1.3:1 Insertion Loss: 0.3 dB Isolation (min) : 18 dB Forward Power (CW)(Max): 20 Watts Input Power (Peak): 300 Watts. WR-34 Waveguide Circulator, 21.7 GHz to 33 GHz, 18 dB min Isolation, Cover Flange, Aluminum. The PE-W34CR001 is a Waveguide Circulator offering 18 dB minimum isolation over the Ka band frequency range of 21.7 to 33 GHz. The design achieves high isolation with wide band performance and the WR-34 waveguide uses UG Square Cover compatible flanges on all ports and has a power rating of 20 watts (CW). Pasternack offers a wide variety of circulators and waveguide circulators to fit your needs. These unique devices enable two signals to use one channel. The classic use of this three port device is for the line between an antenna and a transceiver, allowing the receive signal to come from the antenna (port 1) to the receiver (port 2) while the transmit signal goes from the transmitter (port 3) to the antenna (port 1). An isolator can be created by terminating one port into a matched load. These components can be used in antenna transmitting and receiving, radar, amplifier systems and anything that requires isolation from a signal reflection and the ability to send signals in opposite directions down a single channel. These circulators feature excellent insertion loss, high isolation and reliability. | 1 : $1,570.0
5 : $1,507.2
10 : $1,444.4
25 : $1,381.6
|
| 0
|
PE-W28CR001
| Pasternack Enterprises | Key Specifications. Minimum Frequency: 26.5 GHz Maximum Frequency: 40 GHz Waveguide size: WR-28 VSWR(Max): 1.4:1 Insertion Loss: 0.4 dB Isolation (min) : 16 dB Forward Power (CW)(Max): 15 Watts Input Power (Peak): 300 Watts. WR-28 Waveguide Circulator, 26.5 GHz to 40 GHz, 16 dB min Isolation, Cover Flange, Brass. The PE-W28CR001 is a Waveguide Circulator offering 16 dB minimum isolation over the Ka band frequency range of 26.5 to 40 GHz. The design achieves high isolation with wide band performance and the WR-28 waveguide uses UG Square Cover compatible flanges on all ports and has a power rating of 15 watts (CW). Pasternack offers a wide variety of circulators and waveguide circulators to fit your needs. These unique devices enable two signals to use one channel. The classic use of this three port device is for the line between an antenna and a transceiver, allowing the receive signal to come from the antenna (port 1) to the receiver (port 2) while the transmit signal goes from the transmitter (port 3) to the antenna (port 1). An isolator can be created by terminating one port into a matched load. These components can be used in antenna transmitting and receiving, radar, amplifier systems and anything that requires isolation from a signal reflection and the ability to send signals in opposite directions down a single channel. These circulators feature excellent insertion loss, high isolation and reliability. | 1 : $1,850.0
5 : $1,776.0
10 : $1,702.0
25 : $1,628.0
|
| 0
|
PE-W90CR001
| Pasternack Enterprises | Key Specifications. Minimum Frequency: 8.2 GHz Maximum Frequency: 12.4 GHz Waveguide size: WR-90 VSWR(Max): 1.35:1 Insertion Loss: 0.3 dB Isolation (min) : 18 dB Forward Power (CW)(Max): 100 Watts Input Power (Peak): 3 KWatts. WR-90 Waveguide Circulator, 8.2 GHz to 12.4 GHz, 18 dB min Isolation, Cover Flange, Aluminum. The PE-W90CR001 is a Waveguide Circulator offering 18 dB minimum isolation over the X band frequency range of 8.2 to 12.4 GHz. The design achieves high isolation with wide band performance and the WR-90 waveguide uses UG Square Cover compatible flanges on all ports and has a power rating of 100 watts (CW). Pasternack offers a wide variety of circulators and waveguide circulators to fit your needs. These unique devices enable two signals to use one channel. The classic use of this three port device is for the line between an antenna and a transceiver, allowing the receive signal to come from the antenna (port 1) to the receiver (port 2) while the transmit signal goes from the transmitter (port 3) to the antenna (port 1). An isolator can be created by terminating one port into a matched load. These components can be used in antenna transmitting and receiving, radar, amplifier systems and anything that requires isolation from a signal reflection and the ability to send signals in opposite directions down a single channel. These circulators feature excellent insertion loss, high isolation and reliability. | 1 : $1,650.0
5 : $1,584.0
10 : $1,518.0
25 : $1,452.0
|
| 0
|
Vyrian | VT1314SFCR-001
| Analog Devices Inc | | | 9,591
|
VT1115SFCR-001
| Analog Devices Inc | | | 8,208
|
VT1317SFCR-001
| Analog Devices Inc | | | 7,488
|
STEVAL-SCR001V1
| STMicroelectronics | | | 2,512
|
Italian ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand