| Motore di ricerca datesheet componenti elettronici |
|
G-R1 Reseller |
| Reseller | Il numero della parte | Produttore elettronici | Spiegazioni elettronici | Price | Qty. BuyNow | |
![]() TME | FIX-GR-11 | Fix&Fasten | Grommet; Ømount.hole: 4.8mm; Øhole: 3.2mm; rubber; black |
| 1,330 | |
| OSX10201-GGR1 | OptoSupply Limited | Display: LED; bargraph; green (7x) / red (3x); 25.5x10.2x7.9mm |
| 490 | ||
| FLRY-B0.50-YL/GR/1 | BQ Cable | Wire; FLRY-B; 1x0.5mm2; stranded; Cu; PVC; yellow-green; 60V |
| 459 | ||
| FLRY-B0.50-GR/1 | BQ Cable | Wire; FLRY-B; 1x0.5mm2; stranded; Cu; PVC; green; 60V; Class: 5 |
| 347 | ||
| KYNAR-GR/100 | BQ Cable | Wire; 30AWG; wire; OFC; FEP; green; 250V; 100m; 1x30AWG |
| 200 | ||
| FLRY-A2.50-GR/1 | BQ Cable | Wire; FLRY-A; 1x2.5mm2; stranded; Cu; PVC; green; 60V; Class: 5 |
| 118 | ||
| VECUT32GR11 | Delta Plus Group | Protective gloves; Size: 11; grey; DELTAnocut®,polyurethane |
| 43 | ||
| W3M13521270B10GR1N | WTL | Crystal; 13.52127MHz; 10pF; ±50ppm; ±3ppm/year; 3.2x2.5x0.7mm |
| 0 | ||
| S5G_R1_00001 | PanJit Semiconductor | Diode: rectifying; SMD; 400V; 5A; DO214AB,SMC; Ufmax: 1.1V; Ir: 10uA RoHS : Compliant |
| 0 | ||
| LQP03TGR10J02D | Murata Manufacturing Co Ltd | Inductor: film; SMD; 0201; 100nH; 80mA; R: 8.05Ω; ±5%; LQP; 180mm RoHS : Compliant |
| 0 | ||
IXGR16N170AH1![]() | IXYS Corporation | Transistor: IGBT; 1.7kV; 16A; 120W; TO247-3 RoHS : Compliant |
| 0 | ||
| MSGR-10S-TR | Sungmun Electronics Co Ltd | Rotary Coded Switch: DEC/BCD; Pos: 10; SMT; Rcont max: 80mΩ; reel |
| 0 | ||
| NH42GR1000KVA-8 | Mersen Electrical Power | Fuse: fuse; NH4a; ceramic; holders; 1.443kA; 400VAC; gTr |
| 0 | ||
| 11BGR1201A23060 | Lovato Electric Inc | Contactor: 3-pole reversing; NO x3; Auxiliary contacts: NC; 12A |
| 0 | ||
| 11BGR1201D125 | Lovato Electric Inc | Contactor: 3-pole reversing; NO x3; Auxiliary contacts: NC; 12A |
| 0 | ||
![]() Verical | GR1M | EIC Corporation | Diode Switching 1KV 1A 2-Pin SMA RoHS : Compliant |
| 130,000 | |
| GR1D | Suzhou Good-Ark Electronics Co Ltd | Diode Switching 200V 1A 2-Pin SMA RoHS : Compliant |
| 7,500 | ||
| GR1J | Suzhou Good-Ark Electronics Co Ltd | Diode Switching 600V 1A 2-Pin SMA RoHS : Compliant |
| 6,177 | ||
| GR1B | Suzhou Good-Ark Electronics Co Ltd | Diode Switching 100V 1A 2-Pin SMA RoHS : Compliant |
| 4,705 | ||
| GR108-SLD | Custom Connector Corporation | Relay Socket SKT 8 POS Solder ST Panel Mount |
| 250 | ||
![]() Avnet Americas | BSI516R0100GR17 | Vishay Intertechnologies | - Tape and Reel (Alt: BSI516R0100GR17) RoHS : Not Compliant |
| 0 | |
| PA-758-102G-R1 | NIDEC Components | - Bulk (Alt: PA-758-102G-R1) RoHS : Compliant |
| 0 | ||
| EC25AUXGR-128-SGNS | Quectel Wireless Solutions Co Ltd | - Tape and Reel (Alt: EC25AUXGR-128-SGNS) RoHS : Compliant |
| 0 | ||
| APT50GR120JD30 | Microchip Technology Inc | - Rail/Tube (Alt: APT50GR120JD30) RoHS : Not Compliant |
| 0 | ||
| TR021680GR15 | Vishay Intertechnologies | - Tape and Reel (Alt: TR021680GR15) RoHS : Not Compliant |
| 0 | ||
| RLP01R3160GR15 | Vishay Intertechnologies | - Tape and Reel (Alt: RLP01R3160GR15) RoHS : Not Compliant |
| 0 | ||
| IT3101GR14S-2P | Glenair Inc | 5015 THREADED COUPLING CONNECTOR POWER PRODUCTS - Bulk (Alt: IT3101GR14S-2P) RoHS : Not Compliant |
| 0 | ||
| IT4106GR12-5P | Glenair Inc | 5015 THREADED COUPLING CONNECTOR POWER PRODUCTS - Bulk (Alt: IT4106GR12-5P) RoHS : Not Compliant |
| 0 | ||
| ITB41030GR18-10S | Glenair Inc | 5015 REVERSE BAYONET POWER PRODUCTS - Bulk (Alt: ITB41030GR18-10S) RoHS : Not Compliant |
| 0 | ||
| ITS3106GR14S-6P | Glenair Inc | 5015 REVERSE BAYONET POWER PRODUCTS - Bulk (Alt: ITS3106GR14S-6P) RoHS : Not Compliant |
| 0 | ||
| ITS4106GR14S-7P | Glenair Inc | 5015 REVERSE BAYONET POWER PRODUCTS - Bulk (Alt: ITS4106GR14S-7P) RoHS : Not Compliant |
| 0 | ||
| ITS4106GR18-8P4M15F7 | Glenair Inc | 5015 REVERSE BAYONET POWER PRODUCTS - Bulk (Alt: ITS4106GR18-8P4M15F7) RoHS : Not Compliant |
| 0 | ||
| ITS41070GR16S-1S | Glenair Inc | 5015 REVERSE BAYONET POWER PRODUCTS - Bulk (Alt: ITS41070GR16S-1S) RoHS : Not Compliant |
| 0 | ||
| EC25EUXGR-128-SGNS | Quectel Wireless Solutions Co Ltd | Cellular Module, EDGE, GNSS, GSM, LTE-FDD, LTE-TDD, WCDMA, 3V to 3.6V, 30mm x 51mm x 4.9mm - Tape and Reel (Alt: EC25EUXGR-128-SGNS) RoHS : Compliant |
| 0 | ||
| FRITS41030GR16S-1PB0F7 | Glenair Inc | POWER PRODUCTS - BLQ - 26482 CONNECTORS - Bulk (Alt: FRITS41030GR16S-1PB0F7) RoHS : Not Compliant |
| 0 | ||
![]() Mouser Electronics | GR103E1K | Littelfuse Inc | NTC Thermistors NTC THRM GLASS BEAD 3435 10K 10% RoHS : Compliant |
| 341 | |
| GR102F1K | Littelfuse Inc | NTC Thermistors NTC THERMISTOR 1K OHM 10% GLASS BEAD RoHS : Compliant |
| 328 | ||
| PBM2-M-GR12-F-BA-67 | Same Sky | Pushbutton Switches - Industrial Push Button, SPST-NO, Off-(On), 3V, Anti Vandal, 16mm, Raised, Black Alloy, Blue Illuminated, Panel Mount, IP67 RoHS : Compliant |
| 93 | ||
| PBM1-M-GR12-P-F-SS-67 | Same Sky | Pushbutton Switches - Industrial Push Button, SPST-NO, Off-(On), 5-12V, Anti Vandal, 16mm, Flat, SS, Green Illuminated, Panel Mount, IP67 RoHS : Compliant |
| 86 | ||
| PBM1-M-GR12-F-SS-67 | Same Sky | Pushbutton Switches - Industrial Push Button, SPST-NO, Off-(On), 3V, Anti Vandal, 16mm, Raised, SS, Blue Illuminated, Panel Mount, IP67 RoHS : Compliant |
| 74 | ||
| PBM12-M-GR12-F-BA-67 | Same Sky | Pushbutton Switches - Industrial Push Button, SPDT, 12V, Anti Vandal, 22mm, Flat, BA, Green Illum, Pnl Mnt, 67 |
| 36 | ||
| GR1 | Eaton Corporation | Time Delay & Timing Relays LTG CONT OPN 100A 3P 120V MECH HLD |
| 0 | ||
| GR108-PCB | Song Chuan Precision Company | Relay Sockets & Hardware |
| 0 | ||
| GR108-SLD | Song Chuan Precision Company | Relay Sockets & Hardware |
| 0 | ||
| GR104R1K | Littelfuse Inc | NTC Thermistors NTC THERMISTOR 100K OHM 10% GLASS BEAD RoHS : Compliant |
| 0 | ||
| GR1-202 | ABB Low Voltage Products and Systems | Fixed Terminal Blocks FIG 8 CONN 1IN GRD ROD 2-2/0 AWG |
| 0 | ||
| GR1-40250 | ABB Low Voltage Products and Systems | Fixed Terminal Blocks FIG 8 CONN 1IN GRD ROD 4/0-250 |
| 0 | ||
| GR12-202 | ABB Low Voltage Products and Systems | Fixed Terminal Blocks FIG 8 CONN 1/2IN GRD ROD 2-2/0 AWG |
| 0 | ||
| GR1W | ABB Low Voltage Products and Systems | Conduit Fittings & Accessories 3/8 GROUND STRAP |
| 0 | ||
| GR12-306 | ABB Low Voltage Products and Systems | Fixed Terminal Blocks PIGTAIL CONN, 1/2IN ROD, 87H DIE |
| 0 | ||
![]() Arrow Electronics | GR1D | Suzhou Good-Ark Electronics Co Ltd | Diode Switching 200V 1A 2-Pin SMA RoHS : Compliant |
| 7,500 | |
| GR1J | Suzhou Good-Ark Electronics Co Ltd | Diode Switching 600V 1A 2-Pin SMA RoHS : Compliant |
| 6,177 | ||
| GR1B | Suzhou Good-Ark Electronics Co Ltd | Diode Switching 100V 1A 2-Pin SMA RoHS : Compliant |
| 4,705 | ||
![]() Newark | FG-R14-6B | KEMET Corporation | Current Sensor, 0.6A, 5.25V, Analogue; |Kemet FG-R14-6B RoHS : Compliant |
| 160 | |
| TRD695SRA1GR-1 | L-com Inc | Ethernet Cbl, Cat6; |L-Com TRD695SRA1GR-1 RoHS : Compliant |
| 117 | ||
| TRD815GR-10 | L-com Inc | Ethernet Cbl, Cat5E; |L-Com TRD815GR-10 RoHS : Compliant |
| 86 | ||
| FMCA2601/GR-12 | Fairview Microwave Inc | Cbl Assy, Bnc Plug-Plug, 75 Ohm, 12"; |Fairview Microwave FMCA2601/GR-12 RoHS : Not Compliant |
| 78 | ||
| TRD815CRGR-10 | L-com Inc | Ethernet Cbl, Cat5E; |L-Com TRD815CRGR-10 RoHS : Compliant |
| 70 | ||
| FG-R14-6B | KEMET Corporation | Current Sensor, 0.6A, 5.25V, Analog; Sensor Output Type:Analog; Supply Voltage Range:4.75V To 5.25V; Measured Current:Ac/Dc; Accuracy:-; Current Sensor Technology:Flux Gate Current Sensor; Secondary Signal Type:Current Rohs Compliant: Yes |Kemet FG-R14-6B RoHS : Compliant |
| 30 | ||
| DR2G-GR10-W | Midlite Corporation | Double Gang Cable Pass Through Wall Plat; |Midlite Products DR2G-GR10-W RoHS : Compliant |
| 16 | ||
| TRD815RA10GR-1 | L-com Inc | Enet Cord, Cat5E, R/A Rj45 Plug-Plug, 1'; |L-Com TRD815RA10GR-1 RoHS : Compliant |
| 15 | ||
| FMCA2674/GR-12 | Fairview Microwave Inc | Cbl Assy, Bnc Plug-Hd Bnc Plug, 12"; |Fairview Microwave FMCA2674/GR-12 RoHS : Not Compliant |
| 10 | ||
| FMCA2602/GR-120 | Fairview Microwave Inc | Cbl Assy, Bnc Plug-Hd Bnc Plug, 120"; |Fairview Microwave FMCA2602/GR-120 RoHS : Not Compliant |
| 10 | ||
| SFODLC-GR-10 | L-com Inc | Fo Cbl, Singlemode, 2Fiber, 9Um/125Um; |L-Com SFODLC-GR-10 RoHS : Compliant |
| 5 | ||
| FMCA2604/GR-12 | Fairview Microwave Inc | Cbl Assy, Hd Bnc Plug-Plug, 75 Ohm, 12"; |Fairview Microwave FMCA2604/GR-12 RoHS : Not Compliant |
| 5 | ||
| TRD695SRA2GR-1 | L-com Inc | Ethernet Cbl, Cat6; |L-Com TRD695SRA2GR-1 RoHS : Compliant |
| 3 | ||
| TRD815SRA1GR-10 | L-com Inc | Ethernet Cbl, Cat5E; |L-Com TRD815SRA1GR-10 RoHS : Compliant |
| 1 | ||
| FMCA2603/GR-120 | Fairview Microwave Inc | Cbl Assy, Bnc Plug-1.0/2.3 Plug, 120"; |Fairview Microwave FMCA2603/GR-120 RoHS : Not Compliant |
| 1 | ||
![]() RS | NGR10041BG00N | Eaton Vehicle and Commercial Controls | SP ROCKER SWITCH |
| 117 | |
| 172704-0111 (FPHGR-1AE) | Molex / FCT | FCT PLASTIC BACKSHELL FOR D-SUB CONNECTOR, SHIELDED, SHELL SIZE 1 |
| 85 | ||
| SSA-EB1PLGR-12ECQ8 (26628) | Banner Engineering Corp | E-STOP, 30MM MOUNT, 40MM PUSHBUTTON, GREEN/RED, 2NC/1NO-PNP, IP65, 8-PIN QD |
| 84 | ||
| M6-21-427-GR (173750) | Brady Worldwide Inc | SELF-LAMINATING VINYL WRAP AROUND LABELS 2.5 IN H X 1 IN W GREEN, CLEAR RL/100 |
| 79 | ||
| VX3244-02T-3GR1-B | SMC Corporation of America | VX3 VALVE FOR MEDIA, BODY PORT,1/4 NPT |
| 25 | ||
| 1SET411001R0000 (WD-1-DP-GR1001) | TE Connectivity | WIRING DUCT, PVC, GRAY, 2 M LENGTH, FLAME-RETARDANT, 100 X 100 MM |
| 12 | ||
| NGR10011BN00N | Eaton Vehicle and Commercial Controls | ROCKER SWITCH BASE, ROCKER AND PADDLE FRAME, SP, OFF-NONE-ON, STANDARD CONTACTS |
| 10 | ||
| N6PATCH15GR10PK | StarTech | CAT6 CABLE, 15FT, GRAY ETHERNET CORD, SNAGLESS RJ45 CONNECTORS, PACK OF 10 |
| 9 | ||
| 1SET411004R0000 (WD-1-DP-GR1201) | TE Connectivity | WIRING DUCT, PVC, 100MM H, 2M L, 120MM W, GRAY, FLAME-RETARDANT, -5 TO 60 C DEG |
| 8 | ||
| BNS36-11/01ZG-R (101193177) | Schmersal | SAFETY SENSOR, CODED MAGNET,1)NO/1)NC CONTACTS, NC SIGNALING CONTACT, RH DOOR, LE |
| 7 | ||
| 1SET411003R0000 (WD-1-DP-GR1008) | TE Connectivity | WIRING DUCT, PVC, GRAY, LENGTH 2M, FLAME-RETARDANT, W 100 X H 80MM, -5 TO 60 C |
| 6 | ||
| BNS36-02ZG-R (101190050) | Schmersal | SAFETY SENSOR |
| 3 | ||
| F2211/8 GR103 | Alpha Wire | HEAT SHRINK TUBING, 1/8" ID, 2:1, GREEN XLPO, 4 PIECE(X25), FIT |
| 2 | ||
| TIUB01GR1-20 | SMC Corporation of America | TUBING, POLYURETHANE, TIUB SERIES |
| 1 | ||
| BAM01TC (SCHLAUCHSCHELLE BMF-GR.10) | Balluff Inc | SCHLAUCHSCHELLE BMF-GR.10 |
| 1 | ||
![]() Microchip Technology Inc | SGR117AT | Microchip Technology Inc | Linear Voltage Regulator - Positive Adjustable Rad Hard, Adjustable, 1.5A, Projected EOL: 2046-01-27 RoHS : Not Compliant |
| 1,868 | |
| SGR117AIG-883B | Microchip Technology Inc | Linear Voltage Regulator - Positive Adjustable Rad Hard, Adjustable, 1.5A, Projected EOL: 2046-01-27 RoHS : Compliant |
| 506 | ||
| APT40GR120B2D30 | Microchip Technology Inc | IGBT MOS 8 COMBI 1200 V 40 A TO-247 MAX, T-MAX, Projected EOL: 2028-01-28 RoHS : Compliant |
| 301 | ||
| SGR117AK-883B | Microchip Technology Inc | Linear Voltage Regulator - Positive Adjustable Rad Hard, Adjustable, 1.5A, Projected EOL: 2046-01-27 RoHS : Not Compliant |
| 256 | ||
| SGR117AIG | Microchip Technology Inc | Linear Voltage Regulator - Positive Adjustable Rad Hard, Adjustable, 1.5A, Projected EOL: 2046-01-27 RoHS : Compliant |
| 98 | ||
| APT85GR120B2 | Microchip Technology Inc | IGBT MOS 8 SINGLE 1200 V 85 A TO-247 MAX, T-MAX, Projected EOL: 2046-04-30 RoHS : Compliant |
| 90 | ||
| APT25GR120BD15 | Microchip Technology Inc | IGBT MOS 8 COMBI 1200 V 25 A TO-247, TO-247, Projected EOL: 2028-01-28 RoHS : Compliant |
| 87 | ||
| SGR117AT-883B | Microchip Technology Inc | Linear Voltage Regulator - Positive Adjustable Rad Hard, Adjustable, 1.5A, Projected EOL: 2046-01-27 RoHS : Not Compliant |
| 74 | ||
| APT50GR120L | Microchip Technology Inc | IGBT MOS 8 SINGLE 1200 V 50 A TO-264, TO-264, Projected EOL: 2046-04-30 RoHS : Compliant |
| 66 | ||
| APT85GR120J | Microchip Technology Inc | IGBT MOS 8 SINGLE 1200 V 85 A SOT-227, SOT-227, Projected EOL: 2046-04-30 RoHS : Compliant |
| 64 | ||
| APT70GR120JD60 | Microchip Technology Inc | IGBT MOS 8 COMBI 1200 V 70 A SOT-227, SOT-227, Projected EOL: 2046-04-30 RoHS : Compliant |
| 47 | ||
| APT85GR120JD60 | Microchip Technology Inc | IGBT MOS 8 COMBI 1200 V 85 A SOT-227, SOT-227, Projected EOL: 2046-04-30 RoHS : Compliant |
| 29 | ||
| APT25GR120B | Microchip Technology Inc | IGBT MOS 8 SINGLE 1200 V 25 A TO-247, TO-247, Projected EOL: 2028-01-28 RoHS : Compliant |
| 0 | ||
| APT25GR120S | Microchip Technology Inc | IGBT MOS 8 SINGLE 1200 V 25 A TO-268, TO-268, Projected EOL: 2028-01-28 RoHS : Compliant |
| 0 | ||
| APT25GR120SD15 | Microchip Technology Inc | IGBT MOS 8 COMBI 1200 V 25 A TO-268, TO-268, Projected EOL: 2028-01-28 - Contact for Pricing RoHS : Compliant | 0 | |||
![]() Onlinecomponents.com | 26ET96-R1-G | Honeywell Sensing and Control | MICRO SWITCH™ Electro-Magnetic Held Toggle Switches: ET Series, Double Pole Double Throw (DPDT), 2 Position (On - Mom. On, Coil Energized: On - On), Diodes In Coil Circuitry, Receptacle Connector To Mate With MS27473T10B35SA, Locking Lever (Locked In Extreme Position, Keyway Side) RoHS : Compliant |
| 0 | |
| HA1A-R1-G | IDEC Corporation | CAP RoHS : Compliant |
| 0 | ||
| ABW110-G-W/AW-R1 | IDEC Corporation | TW FLUSH PB W/AW-R1 RoHS : Compliant |
| 0 | ||
| APW199-G-W/AW-R1 | IDEC Corporation | W/OLAMP RoHS : Compliant |
| 0 | ||
| PVML-3-J-R1-G-UNV1-S891 | Cooper Crouse-Hinds | RoHS : Compliant |
| 0 | ||
| VMVL-5-J-R1-G-UNV1 | Cooper Crouse-Hinds | RoHS : Compliant |
| 0 | ||
| VMVL-3-J-R1-G-UNV1 | Cooper Crouse-Hinds | RoHS : Compliant |
| 0 | ||
| PVML-3-J-R1-G-UNV1-S896 | Cooper Crouse-Hinds | RoHS : Compliant |
| 0 | ||
| VMVL-7-J-R1-G-UNV1-S890 | Cooper Crouse-Hinds | RoHS : Compliant |
| 0 | ||
| VMVL-3-P-R1-G-UNV1 | Cooper Crouse-Hinds | RoHS : Compliant |
| 0 | ||
| VMVL-5-P-R1-G-UNV1 | Cooper Crouse-Hinds | RoHS : Compliant |
| 0 | ||
| VMVL-7-J-R1-G-UNV1-S903 | Cooper Crouse-Hinds | RoHS : Compliant |
| 0 | ||
| VMVL-3-J-R1-G-UNV1-S890 | Cooper Crouse-Hinds | RoHS : Compliant |
| 0 | ||
| VMVL-7-2A-R1-G-UNV1 | Cooper Crouse-Hinds | RoHS : Compliant |
| 0 | ||
| VMVL-7-J-R1-G-UNV1-S831 | Cooper Crouse-Hinds | RoHS : Compliant |
| 0 | ||
![]() Rochester Electronics | MC908GR16ACFAE | NXP Semiconductors | IC MCU HC08 8Bit 1 Core FLASH 16kB (16k x 8) 8MHz 48-QFP Tray RoHS : Compliant |
| 2,953 | |
| ICE5GR1680AGXUMA1 | Infineon Technologies AG | Off-Line Converter and Switch Flyback 12-SOP T/R RoHS : Compliant |
| 90 | ||
| BB814E7801GR1HTSA1 | Infineon Technologies AG | Varactor Diode RoHS : Compliant |
| 60,000 | ||
| IBM25PPC750FX-GR1033V | IBM | IBM25PPC750 - PowerPC 750FX RISC Microprocessor RoHS : Not Compliant |
| 15 | ||
| IBM25PPC750FL-GR1033V | IBM | IBM25PPC750 - PowerPC 750FL RISC Microprocessor RoHS : Not Compliant |
| 12 | ||
| IBM25PPC750FX-GR1033T | IBM | RISC Microprocessor, 32-Bit, 733MHz, CMOS, CBGA292 RoHS : Compliant |
| 21 | ||
| IBMPPC750FX-GR1023T | IBM | IBM25PPC750 - PowerPC 750FX RISC Microprocessor RoHS : Not Compliant |
| 1,135 | ||
MC68HC908GR16MFA![]() | Freescale Semiconductor | IC MCU HC08 8Bit 1 Core FLASH 16kB (16k x 8) 8MHz 48-QFP RoHS : Not Compliant |
| 170 | ||
MC908GR16ACFAE![]() | Freescale Semiconductor | IC MCU HC08 8Bit 1 Core FLASH 16kB (16k x 8) 8MHz 48-QFP Tray RoHS : Compliant |
| 953 | ||
MC908GR16AVFAER![]() | Freescale Semiconductor | IC MCU HC08 8Bit 1 Core FLASH 16kB (16k x 8) 8MHz 48-QFP T/R RoHS : Compliant |
| 1,995 | ||
| MC68HC908GR16VFA | Motorola Mobility LLC | Microcontroller, 8-Bit, FLASH, 68HC08 CPU, 8MHz, HCMOS, PQFP48 RoHS : Not Compliant |
| 103 | ||
| MC908GR16ACFA | Motorola Mobility LLC | MC908GR - Microcontroller, 8-Bit, FLASH, 8MHz, HCMOS, PQFP48 RoHS : Not Compliant |
| 60 | ||
| UPA2750GR(1)-E1-A | Renesas Electronics Corporation | MOSFET N-Channel 30V 9A (Ta) 8-SOIC RoHS : Compliant |
| 5,000 | ||
| UPC1934GR-1JG-E1-A | Renesas Electronics Corporation | IC VOLT REG Transistor Driver Step-Down Buck 2 OUT 2.5V - 20V 16-SOP RoHS : Compliant |
| 2,500 | ||
| KW DMLN31.SG-6J6K-EBVF46FCBB46-8E8G-R18 | ams OSRAM Group | KW DMLN31.SG - SYNIOS P2720, White LED RoHS : Compliant |
| 270,000 | ||
![]() Sager | ACPLUGR1-U=418-ACPLUGR1-U | Cincon Electronics Corporation | AC PLUG R1-U=418-ACPLUGR1-U |
| 0 | |
| ACPLUGR1-E=418-ACPLUGR1E=418-T | Cincon Electronics Corporation | AC PLUG R1-E=418-ACPLUGR1E=418-TR10-EURO |
| 0 | ||
| 45GR1KLFTB | TT electronics / BI Technologies | Trimmer Resistors - SMD RoHS : Unknown |
| 0 | ||
| GR104R1K | Littelfuse Inc | NTC THERMISTOR 100K OHM 10% GLASS BEAD RoHS : Unknown |
| 0 | ||
| EYG-R1419ZRWB | Panasonic Electronic Components | EYG-R G-TIM HI THERMAL CONDUCTIVITY IN Z-DIR |
| 0 | ||
| RSCA701-VB-B-9-V-XGR1 | Carling Technologies | Rocker Switches | 0 | |||
| 45GR1MEGLFT13 | TT electronics / BI Technologies | Trimmer Resistors - SMD RoHS : Unknown |
| 0 | ||
| HW7D-L11F1001Q8G-GR1 | IDEC Corporation | Pushbutton Switches HW Dual PB w/PL Mmntry Flsh/Fl RoHS : Compliant |
| 0 | ||
| HW7D-L21F1001T82G-GR1 | IDEC Corporation | Pushbutton Switches HW Dual PB w/PL Intrlck Flsh/F RoHS : Compliant |
| 0 | ||
| HW7D-L21F1111Q3G-GR1 | IDEC Corporation | Pushbutton Switches HW Dual PB w/PL Intrlck Flsh/F RoHS : Compliant |
| 0 | ||
| SVSGR-1212 | ABB Group | Conduit Fittings & Accessories |
| 0 | ||
| HW7D-L11F1010Q8G-GR1 | IDEC Corporation | Pushbutton Switches HW Dual PB w/PL Mmntry Flsh/Fl RoHS : Compliant |
| 0 | ||
| HW7D-L12F1111T82G-GR1 | IDEC Corporation | Pushbutton Switches HW Dual PB w/PL Mmntry Flsh/Ex RoHS : Compliant |
| 0 | ||
| HW7D-L21F2020Q9G-GR1 | IDEC Corporation | Pushbutton Switches HW Dual PB w/PL Intrlck Flsh/F |
| 0 | ||
| HW7D-L22F1111Q8G-GR1 | IDEC Corporation | Pushbutton Switches HW Dual PB w/PL Intrlck Flsh/E RoHS : Compliant |
| 0 | ||
![]() Ameya Holding Limited | MC908GR16CFAE | NXP Semiconductors | IC MCU 8BIT 16KB FLASH 48LQFP RoHS : Compliant | 327 | ||
![]() ComSIT USA | BB814E6327GR1 | Infineon Technologies AG | SILICON VARIABLE CAPCITANCE DIODE Variable Capacitance Diode RoHS : Compliant | 71,435 | ||
| S1GR100001 | PanJit Semiconductor | SURFACE MOUNT RECTIFIER Rectifier Diode, 1 Phase, 1 Element, 1A, 400V V(RRM), Silicon, DO-214AA RoHS : Compliant | 8,501 | |||
| 23GR10KT7 | TT electronics / BI Technologies | Potentiometer, Cermet, 0.25W, 10000ohm, 200V, 20% +/-Tol, -100,100ppm/Cel, 1818 RoHS : Not Compliant | 500 | |||
| 88E6083LGR1 | Marvell Technology Group Ltd | IC Ethernet Switch MII, RMII 10/100 Base-FX/T/TX RoHS : Not Compliant | 187 | |||
| APT25GR120BD15 | mct | Insulated Gate Bipolar Transistor, 75A I(C), 1200V V(BR)CES, N-Channel RoHS : Not Compliant | 130 | |||
MC68908GR16MFJE![]() | Freescale Semiconductor | 8-BIT MICROCONTROLLER Microcontroller, CMOS RoHS : Compliant | 100 | |||
| MC68908GR16M | NXP Semiconductors | Microcontroller, 16-bit, NXP RoHS : Not Compliant | 100 | |||
| DP7015GR100 | Bel Power Solutions | 15A DC-DC Intelligent dPOL DC-DC Regulated Power Supply Module, 1 Output, 82.5W, Hybrid RoHS : Compliant | 100 | |||
| KMC908GR16MFA | Motorola Semiconductor Products | 8-BIT MICROCONTROLLER UNIT (MCU) Microcontroller, 8-Bit, FLASH, 8.2MHz, HCMOS, PQFP48 RoHS : Not Compliant | 80 | |||
| TGR110Q350NC | Halo Electronics Inc | TRANSFORMER MODULE Datacom Transformer, ETHERNET Application(s), 1CT:1CT RoHS : Compliant | 24 | |||
| TGR110Q350NCRL | Halo Electronics Inc | Datacom Transformer, ETHERNET Application(s), 1CT:1CT RoHS : Compliant | 8 | |||
![]() Interstate Connecting Components | IT3101GR14S-2P | Glenair Inc | 0 | |||
| IT4106GR12-5P | Glenair Inc | 0 | ||||
| ITB41030GR18-10S | Glenair Inc | 0 | ||||
| ITS3106GR14S-6P | Glenair Inc | 0 | ||||
| ITS4106GR14S-7P | Glenair Inc | 0 | ||||
| ITS4106GR18-8P4M15F7 | Glenair Inc | 0 | ||||
| ITS41070GR16S-1S | Glenair Inc | 0 | ||||
| FRITS41030GR16S-1PB0F7 | Glenair Inc | RoHS : Compliant | 0 | |||
| ITS4106GR14S-1SMB | Glenair Inc | 0 | ||||
| ITS4106GR16-10S | Glenair Inc | 0 | ||||
| ITB41030GR14S-6P-CRM | Glenair Inc | 0 | ||||
| ITS3106GR16S-8P | Glenair Inc | 0 | ||||
| ITS4106GR18-11PX | Glenair Inc | 0 | ||||
| ITS41070GR14S-6SF7 | Glenair Inc | 0 | ||||
| IT3101GR14S-2S | Glenair Inc | 0 | ||||
![]() PEI Genesis | RIG-R10S3-16-M-BL-NKW | Amphenol Corporation |
| 0 | ||
| RIG-R17PR-BL | Amphenol Corporation |
| 0 | |||
| GTC06GR18-11S-LC | Amphenol Corporation |
| 0 | |||
| RIG-R10S5-22-K-H215 | Amphenol Corporation |
| 0 | |||
| RIG-R10P3-16-M-R-NKW | Amphenol Corporation |
| 0 | |||
| RIG-R17PR-H215 | Amphenol Corporation |
| 0 | |||
| RIG-R17PR-BL-H214 | Amphenol Corporation |
| 0 | |||
| RIG-R10S5-22-K-H216 | Amphenol Corporation |
| 0 | |||
| RIG-R17PR-R | Amphenol Corporation |
| 0 | |||
| RIG-R17PR-H216 | Amphenol Corporation |
| 0 | |||
| GTC06GR16S-1S-LC | Amphenol Corporation |
| 0 | |||
| RIG-R10S3-16-M-R-NKW | Amphenol Corporation |
| 0 | |||
| ACS06PGR14S-2P-472 | Amphenol Corporation |
| 0 | |||
| RIG-R10P3-16-M-BK-NKW | Amphenol Corporation |
| 0 | |||
| RIG-R17PR-BK | Amphenol Corporation |
| 0 | |||
![]() Powell Electronics | GTC06GR18-1P-LC | Amphenol Corporation | GT 10C 10#16 PIN PLUG |
| 358 | |
| GTC06GR18-4S-LC | Amphenol Corporation | CONNECTOR |
| 222 | ||
| GTC06GR14S-5P-LC | Amphenol Corporation | CONNECTOR |
| 218 | ||
| GTC06GR-16S-8PLC | Amphenol Corporation | CONNECTOR |
| 28 | ||
| GTC06GR-16S-8P(A24) | Amphenol Corporation | CONNECTOR |
| 28 | ||
| GTC06GR-18-1SLC | Amphenol Corporation | CONNECTOR |
| 24 | ||
| GTC06GR16S-8P-LC | Amphenol Corporation | GT 5C 5#16S PIN PLUG |
| 20 | ||
| GTC06GR16S-8S-LC | Amphenol Corporation | GT 5C 5#16S SKT PLUG |
| 20 | ||
| GTC06GR16S-1P-LC | Amphenol Corporation | GT 7C 7#16S PIN PLUG |
| 20 | ||
| GTC06GR-16S-1SLC | Amphenol Corporation | CONNECTOR |
| 16 | ||
| GTC01GR-14S-2P(A24) | Amphenol Corporation | CONNECTOR |
| 15 | ||
| GTC06GR14S-2S-LC | Amphenol Corporation | CONNECTOR |
| 3 | ||
| 289-0124S37MEGR-186 | Glenair Inc | HIPER-D - RECTANGULAR CONN |
| 2 | ||
| 289-0122H26MEGR-186M | Glenair Inc | HIPER-D - RECTANGULAR CONN |
| 1 | ||
| 289-0122H26MEGR-186 | Glenair Inc | HIPER-D - RECTANGULAR CONN |
| 1 | ||
![]() Chip 1 Exchange | HDD09-04F-LGR1 | INSTOCK | 4,000 | |||
| 44GR100KLFT7 | INSTOCK | 884 | ||||
| BB814-E6327-GR1 | Infineon Technologies AG | INSTOCK | 694 | |||
| BB814-E6327-GR1 | INSTOCK | 619 | ||||
| GR-175063-002M1 | INSTOCK | 300 | ||||
| 430GR-101-103 | Bourns Inc | INSTOCK | 70 | |||
| ABKG_R1LP0408CSP-5SI B0 | Renesas Electronics Corporation | INSTOCK | 50 | |||
![]() Avnet Abacus | FG-R14-6B | KEMET Corporation | Current Sensor Open Loop Flux Gate 50mA to 50mA 475 V to 525 V Analogue Through Hole (Alt: FG-R14-6B) RoHS : Compliant | 0 | ||
| G3VM21GR1 | Aratas Corporation | Relay SSR 50mA 13V DCIN 03A 20V ACOUT 4Pin SOP (Alt: G3VM21GR1) RoHS : Compliant | 0 | |||
| DP7015G-R100 | Bel Fuse | Non Isolated Board Mount DCDC Converter SMD Open Frame 825 W 700 mV 55 V 15 A 8V 14 V (Alt: DP7015G-R100) RoHS : Compliant | 0 | |||
| ERJB1CGR10U | Panasonic Electronic Components | - Tape and Reel (Alt: ERJB1CGR10U) RoHS : Compliant | 0 | |||
| ERJ2BSGR10X | Panasonic Electronic Components | - Tape and Reel (Alt: ERJ2BSGR10X) RoHS : Compliant | 0 | |||
| ERJ6BSGR11V | Panasonic Electronic Components | - Tape and Reel (Alt: ERJ6BSGR11V) RoHS : Compliant | 0 | |||
| ERJA1CGR16U | Panasonic Electronic Components | - Tape and Reel (Alt: ERJA1CGR16U) RoHS : Compliant | 0 | |||
| ERJ6BSGR16V | Panasonic Electronic Components | - Tape and Reel (Alt: ERJ6BSGR16V) RoHS : Compliant | 0 | |||
| ERJB1CGR18U | Panasonic Electronic Components | - Tape and Reel (Alt: ERJB1CGR18U) RoHS : Compliant | 0 | |||
| ERJ6BSGR18V | Panasonic Electronic Components | - Tape and Reel (Alt: ERJ6BSGR18V) RoHS : Compliant | 0 | |||
| ERJ1TRSGR12U | Panasonic Electronic Components | - Tape and Reel (Alt: ERJ1TRSGR12U) RoHS : Compliant | 0 | |||
| ERJ1TRSGR16U | Panasonic Electronic Components | - Tape and Reel (Alt: ERJ1TRSGR16U) RoHS : Compliant | 0 | |||
| ERJ14BSGR13U | Panasonic Electronic Components | - Tape and Reel (Alt: ERJ14BSGR13U) RoHS : Compliant | 0 | |||
| ERJ12RSGR12U | Panasonic Electronic Components | - Tape and Reel (Alt: ERJ12RSGR12U) RoHS : Compliant | 0 | |||
| ERJ14BSGR18U | Panasonic Electronic Components | - Tape and Reel (Alt: ERJ14BSGR18U) RoHS : Compliant | 0 | |||
![]() Avnet Asia | EC25AUXGR-128-SGNS | Quectel Wireless Solutions Co Ltd | (Alt: EC25AUXGR-128-SGNS) RoHS : Compliant | 0 | ||
| EC21EUXGR-128-SGNS | Quectel Wireless Solutions Co Ltd | Cellular Module, GSM, LTE-FDD, WCDMA, 3.3V to 4.3V, 29mm x 32mm x 2.4mm (Alt: EC21EUXGR-128-SGNS) RoHS : Compliant | 0 | |||
| EYGR1818ZRX2 | Panasonic Electronic Components | GraphiteTIM PGS for IGBT Modules 180mm x 180mm x 0.35mm (Alt: EYGR1818ZRX2) RoHS : Compliant | 0 | |||
| KW DMLS33.SG-8M3-EBXDEBZB46-8E8G-R18-AL | ams OSRAM Group | (Alt: KW DMLS33.SG-8M3-EBXDEBZB46-8E8G-R18-AL) RoHS : Compliant | 0 | |||
| GS1MWG_R1_00001 | PanJit Semiconductor | (Alt: GS1MWG_R1_00001) RoHS : Compliant | 0 | |||
| LRW0603WGR12GG001E | Johanson Technology Inc | JTILRW0603WGR12GG001E WIREWOUND INDUCTOR (Alt: LRW0603WGR12GG001E) RoHS : Compliant | 0 | |||
| EYGR1818ZLX2 | Panasonic Electronic Components | GraphiteTIM PGS for IGBT Modules 180mm x 180mm x 0.25mm (Alt: EYGR1818ZLX2) RoHS : Compliant | 0 | |||
| RS1MWG_R1_00001 | PanJit Semiconductor | (Alt: RS1MWG_R1_00001) RoHS : Compliant | 0 | |||
![]() Avnet Silica | GS1G_R1_00001 | PanJit Semiconductor | SMA1A400VGenPurp RectSMDGP (Alt: GS1G_R1_00001) RoHS : Compliant | 7,200 | ||
| US1KWG_R1_00001 | PanJit Semiconductor | Ultra Fast Recovery Rectifier 800V 1A 2Pin SMAW TR (Alt: US1KWG_R1_00001) RoHS : Compliant | 7,200 | |||
| TGR1G-S405N24LFTR | Halo Electronics Inc | SMD ISOLATION MODULE (Alt: TGR1G-S405N24LFTR) RoHS : Compliant | 220 | |||
| TGR110-E055N16LF | Halo Electronics Inc | HLOTGR110E055N16LF (Alt: TGR110-E055N16LF) RoHS : Compliant | 210 | |||
| RS1G_R1_00001 | PanJit Semiconductor | (Alt: RS1G_R1_00001) RoHS : Compliant | 0 | |||
| APT50GR120JD30 | Microchip Technology Inc | (Alt: APT50GR120JD30) RoHS : Compliant | 0 | |||
| US1MWG_R1_00001 | PanJit Semiconductor | (Alt: US1MWG_R1_00001) RoHS : Compliant | 0 | |||
| RS1AWG_R1_00001 | PanJit Semiconductor | (Alt: RS1AWG_R1_00001) RoHS : Compliant | 0 | |||
| TGR1G-Q505N24LF | Halo Electronics Inc | SMT24 Isolation transformer module (Alt: TGR1G-Q505N24LF) RoHS : Compliant | 0 | |||
| TGR110-Q350V12LF | Halo Electronics Inc | (Alt: TGR110-Q350V12LF) RoHS : Compliant | 0 | |||
| TGR110-Q350V12LFTR | Halo Electronics Inc | HLOTGR110Q350V12LFTR (Alt: TGR110-Q350V12LFTR) RoHS : Compliant | 0 | |||
| EG95NAXDGR-128-SGNS | Quectel Wireless Solutions Co Ltd | Cellular Module GNSS LTEFDD WCDMA 33V to 43V 29mm x 25mm x 23mm (Alt: EG95NAXDGR-128-SGNS) RoHS : Compliant | 0 | |||
| EC25AUXGR-128-SGNS | Quectel Wireless Solutions Co Ltd | Cellular Module EDGE GNSS GSM LTEFDD LTETDD WCDMA 3V to 36V 30mm x 51mm x 49mm (Alt: EC25AUXGR-128-SGNS) RoHS : Compliant | 0 | |||
| EC25EUXGR-128-SGNS | Quectel Wireless Solutions Co Ltd | Cellular Module EDGE GNSS GSM LTEFDD LTETDD WCDMA 3V to 36V 30mm x 51mm x 49mm (Alt: EC25EUXGR-128-SGNS) RoHS : Compliant | 0 | |||
| PJESDA5V6-5G _R1 _00001 | PanJit Semiconductor | (Alt: PJESDA5V6-5G_R1_00001) RoHS : Compliant | 0 | |||
![]() Component Electronics, Inc | EGR105M063T1A1C110 | Teapo Electronic Corporation | IN STOCK SHIP TODAY | 7,000 | ||
| R13-203AL1-01-BCGR1 | SCI | IN STOCK SHIP TODAY |
| 1,990 | ||
| EGR106M050S1A1C110 | Teapo Electronic Corporation | IN STOCK SHIP TODAY |
| 1,827 | ||
| EGR107M035T2A1G110 | Teapo Electronic Corporation | IN STOCK SHIP TODAY | 900 | |||
| EGR107M050T2A1G110 | Teapo Electronic Corporation | IN STOCK SHIP TODAY | 700 | |||
| 44GR1KLFT7 | TT electronics / BI Technologies | IN STOCK SHIP TODAY RoHS : Compliant |
| 267 | ||
| 23GR10K-T7 | TT electronics / BI Technologies | IN STOCK SHIP TODAY |
| 180 | ||
| EGR107M025S1A1G110 | Teapo Electronic Corporation | IN STOCK SHIP TODAY |
| 163 | ||
| EGR107M025S1A1E110 | Teapo Electronic Corporation | IN STOCK SHIP TODAY | 100 | |||
| GR-1/8B | Festo | IN STOCK SHIP TODAY | 11 | |||
| GR108-PCB | Custom Connector Corporation | IN STOCK SHIP TODAY |
| 3 | ||
![]() DB Roberts | PGR1/2A | Essentra Components | RAISED FLANGE DISC ADHESIVEHDP | 0 | ||
| PGR1-1/4A | Essentra Components | RAISED FLANGE DISC ADHESIVEHDP | 0 | |||
| PGR12A | Essentra Components | RAISED FLANGE DISC ADHESIVEHDP | 0 | |||
| PGR1A | Essentra Components | RAISED FLANGE DISC ADHESIVEHDP | 0 | |||
| PGR10A | Essentra Components | RAISED FLANGE DISC ADHESIVEHDP | 0 | |||
| PGR1-1/2A | Essentra Components | RAISED FLANGE DISC ADHESIVEHDP | 0 | |||
![]() EBV Elektronik | MC908GR16CFAE | NXP Semiconductors | 8 Bit MCU HC08 Family HC08GR Series Microcontrollers HC08 8 MHz 16 KB 48 Pins LQFP (Alt: MC908GR16CFAE) RoHS : Compliant | 250 | ||
| APT85GR120L | Microchip Technology Inc | Trans IGBT Chip NCH 12KV 170A 3Pin TO264 (Alt: APT85GR120L) RoHS : Compliant | 0 | |||
| APT85GR120B2 | Microchip Technology Inc | Trans IGBT Chip NCH 12KV 170A 3Pin TMAX (Alt: APT85GR120B2) RoHS : Compliant | 0 | |||
| APT70GR120B2 | Microchip Technology Inc | (Alt: APT70GR120B2) RoHS : Compliant | 0 | |||
| MC908GR16VFAE | NXP Semiconductors | MCU 8bit HC08 CISC 16KB Flash 33V5V 48Pin LQFP Tray (Alt: MC908GR16VFAE) RoHS : Compliant | 0 | |||
| APT70GR120JD60 | Microchip Technology Inc | (Alt: APT70GR120JD60) RoHS : Compliant | 0 | |||
| APT85GR120JD60 | Microchip Technology Inc | (Alt: APT85GR120JD60) RoHS : Compliant | 0 | |||
| MC908GR16ACFAE | NXP Semiconductors | 8 Bit MCU HC08 Family HC08GR Series Microcontrollers (Alt: MC908GR16ACFAE) RoHS : Compliant | 0 | |||
| MC68908GR16VFJE | NXP Semiconductors | MCU 8bit HC08 CISC 16KB Flash 33V5V 32Pin LQFP (Alt: MC68908GR16VFJE) RoHS : Compliant | 0 | |||
| MC68908GR16MFJE | NXP Semiconductors | MCU 8bit HC08 CISC 16KB Flash 33V5V 32Pin LQFP Brick (Alt: MC68908GR16MFJE) RoHS : Compliant | 0 | |||
| MC68908GR16CFJE | NXP Semiconductors | 8 Bit MCU HC08 Family HC08GR Series Microcontrollers HC08 8 MHz 16 KB 32 Pins LQFP (Alt: MC68908GR16CFJE) RoHS : Compliant | 0 | |||
| ICE5GR1680AGXUMA1 | Infineon Technologies AG | ACDC Converter Non Isolated Flyback 105V to 24VAC In 125kHz 27W SOIC12 (Alt: SP001602160) RoHS : Compliant | 0 | |||
| CBT-90-WDLS-C11-GR150 | Luminus Devices | High Power LEDs (Alt: CBT-90-WDLS-C11-GR150) RoHS : Compliant | 0 | |||
![]() Flip Electronics | S908GR16AE0CFAER | NXP Semiconductors | Stock RoHS : Compliant | 2,000 | ||
| MC68908GR16MFJE | NXP Semiconductors | Stock RoHS : Compliant | 800 | |||
| KC68908GR16MFJE | NXP Semiconductors | Stock, Ship Today |
| 800 | ||
| MC68908GR16CFJE | NXP Semiconductors | Stock, Ship Today RoHS : Compliant |
| 459 | ||
| WGR1000B S LAAZ | Altera Corporation | Stock | 80 | |||
![]() Master Electronics | F2213/16-GR103 | Alpha Wire | FIT2213/16 GREEN 25X4 FT RoHS : Compliant |
| 518 | |
| EYG-R1419ZRWB | Panasonic Electronic Components | EYG-R RoHS : Compliant |
| 0 | ||
| APT50GR120JD30 | Microchip Technology Inc | IGBT MOS 8 1200 V 50 A SOT-227 RoHS : Compliant |
| 0 | ||
| HW7D-L11F1001Q8G-GR1 | IDEC Corporation | RoHS : Compliant |
| 0 | ||
| HW7D-L21F1001T82G-GR1 | IDEC Corporation | RoHS : Compliant |
| 0 | ||
| HW7D-L21F1111Q3G-GR1 | IDEC Corporation | RoHS : Compliant |
| 0 | ||
| SVSGR-1212 | Thomas & Betts | PMAFIX Connection Splice - Conduit Size NW12 - Material Polyamide 6 - Color Grey - Overall Length 66.0mm - IP68 RoHS : Compliant |
| 0 | ||
| A22GR10A | OMRON Industrial Automation | PB RND GARD SPST-NO RED ALT. RoHS : Compliant |
| 0 | ||
| A22LGR1220M | OMRON Industrial Automation | IL PB RND RED 12VACDPST-NO MOM RoHS : Compliant |
| 0 | ||
| SACCDSIM12FSL4FEM1602GR1 | Phoenix Contact | Flush-type connector - Power - 5-position - Socket - M12 - L - Power - Rear mounting - M16 x 1.5 - Individual wires - cable length: 0.2 m - 1.31 mm² - UL/cUL stranded hook-up wire RoHS : Compliant |
| 0 | ||
| HW7D-L11F1010Q8G-GR1 | IDEC Corporation | RoHS : Compliant |
| 0 | ||
| HW7D-L12F1111T82G-GR1 | IDEC Corporation | RoHS : Compliant |
| 0 | ||
| HW7D-L21F2020Q9G-GR1 | IDEC Corporation | RoHS : Compliant |
| 0 | ||
| HW7D-L22F1111Q8G-GR1 | IDEC Corporation | RoHS : Compliant |
| 0 | ||
| HW7D-B11F1001-GR1 | IDEC Corporation | RoHS : Compliant |
| 0 | ||
![]() Neutron USA | HW7D-L22F1111Q4G-GR1 | IDEC Corporation | Pushbutton Switches HW Dual PB w/PL Intrlck Flsh/E RoHS : Compliant |
| 50 | |
| SSA-EB1PLGR-12ED1Q8, 29991 | Banner Engineering Corp | Emergency Stop Switches / E-Stop Switches Emergency Stop: Flush Mounting 40 mm Push Button; Environ. Rating: IP65; Lighted; Color: Green, Red Solid/Flashing; 2 N.C. Safety Contacts; 1 N.O. aux. Contacts; 8-pin M12 QD |
| 50 | ||
| N6PATCH10GR10PK | StarTech | 10FT CAT6 CABLE 10 PACK GRAY SNAGLESS - 24 AWG COPPER WIRE |
| 50 | ||
| SSA-EB1PLGR-12ECQ8, 26628 | Banner Engineering Corp | Emergency Stop Switches / E-Stop Switches SSA-EB1 30 mm Mount Emergency Stop Push Button; Green and Red Flash/Solid Illuminated Base; 40 mm Actuator; IP65; Contacts: 2NC/1NO-PNP; 8-pin M12 Integral QD |
| 50 | ||
| NGR10011BN00N | Eaton Corporation | Rocker Switch Base, Rocker and Paddle Frame, SP, OFF-NONE-ON, Standard Contacts |
| 10 | ||
| AFL-057A-Z530/R/1G-R10 | iEi Integration Corporation | 5.7" 400cd/m2 VGA fanless Panel PC,W/ Intel Atom Z530 CPU 1.6GHz,PoE IEEE 802.3af,touch screen,1GB DDR2 (with XPembedded AFLCF-057-US15W-XPE-R10 installed) |
| 1 | ||
| AFL3-W10A-BT-J1/PC/2G-R14 | iEi Integration Corporation | 10.1" 350cd/m² 1280x800 fanless PPC, Celeron J1900, 4 core 2 GHz, a/b/g/n/ac wireIess, pcap touch screen, 2GB DDR3L RAM |
| 1 | ||
| AFL4-W07-EHL-J1/8G-R11 | iEi Integration Corporation | HMI Displays & Panel PCs 7" 450cd/m(2nd) 1024x600 fanless panel PC with Celeron J6412 on-board processor,TDP 10W, 8GB LPDDR4x on-board, 6E and Bluetooth 5.2 module, PCAP touch, R11 |
| 1 | ||
| GR120A3 | Macromatic Industrial Controls Inc | Relay, General Purpose, Octal Terminals, LED, 120VAC, 10A, 3 Pole |
| 0 | ||
| DP7015G-R100 | Bel Power Solutions | Non-Isolated DC/DC Converters DIGITAL POL 15A HORIZONTAL SMT |
| 0 | ||
| IVU2PTGR12 | Banner Engineering Corp | Vision Sensor, Machine Vision And Barcode Readers, Gen 2, with Ethernet, 90736 |
| 0 | ||
| PBM2-M-GR12-P-F-BA-67 | Same Sky | Pushbutton Switches - Board Mount Push Button, SPST-NO, Off-(On), 5-12V, Anti Vandal, 16mm, Flat, Black Alloy, Green Illuminated, Panel Mount, IP67 |
| 0 | ||
| PBM1-M-GR12-P-F-SS-67 | Same Sky | Pushbutton Switches - Board Mount Push Button, SPST-NO, Off-(On), 5-12V, Anti Vandal, 16mm, Flat, SS, Green Illuminated, Panel Mount, IP67 |
| 0 | ||
| IVU2PTGR16 | Banner Engineering Corp | Vision Sensor, Integrated Screen, Ethernet, Red Light, 16mm lens, iVu |
| 0 | ||
| GR120A2 | Macromatic Industrial Controls Inc | Relay, General Purpose, Octal Terminals, LED, 120VAC, 10A, 2 Pole |
| 0 | ||
![]() Pasternack Enterprises US | PE3C3055LF/GR-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male to SMA Male Low Loss Cable 12 Inch Length Using LMR-195 Coax Times Microwave Components, Green Heat Shrink Indicator, LF Solder., Radio frequency assembly SMA male to SMA male low loss cable 12 inch length using LMR-195 coax Times Microwave components, green heat shrink indicator, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA male low loss cable 12 inch length using LMR-195 coax Times Microwave components, green heat shrink indicator, LF solder, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our low loss SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3C3055LF/GR-12 can also be known as a low loss SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3C3055LF/GR-12 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male low loss cable 12 inch length using LMR-195 coax Times Microwave components, green heat shrink indicator, LF solder. |
| 2,131 | |
| PE3C8741/GR-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-GR, RF Cable Type: Belden 4694R-GR, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm BNC Male to 75 Ohm BNC Male 12G SDI Cable 12 Inch Length Using 75 Ohm 4694R-GR Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male 12G SDI cable 12 inch length using 75 Ohm 4694R-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male 12G SDI cable 12 inch length using 75 Ohm 4694R-GR coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our 12G SDI BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C8741/GR-12, can also be known as a 12G SDI BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to BNC plug cable assembly PE3C8741/GR-12 is built with belden 4694R-GR which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. 12G SDI BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male 12G SDI cable 12 inch length using 75 Ohm 4694R-GR coax. |
| 636 | ||
| PE335/HSGR-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P300LL, RF Cable Type: PE-P300LL, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. N Male to TNC Male Low Loss Cable 12 Inch Length Using PE-P300LL Coax., Radio frequency assembly N male to TNC male low loss cable 12 inch length using PE-P300LL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to TNC male low loss cable 12 inch length using PE-P300LL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a TNC cable connection on the other. Our low loss type N to TNC cable assembly has a male gender on end 1 and a male on end 2. PE335/HSGR-12 can also be known as a low loss type N plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. The minimum bend radius for this cable is 1 inches, allowing for a single bend without damaging the cable. Our PE335/HSGR-12 RF cable has a FEP jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has a between series connection. Our type N male to TNC male cable has a maximum VSWR of 1.4:1. Type N plug to TNC plug cable assembly PE335/HSGR-12 is built with PE-P300LL which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to TNC cable connectors, has a 50 Ohm impedance, and is triple shielded. Both the connectors have a clamp/solder attachment method and a passivated stainless steel body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE335/HSGR-12 can also be used in the other direction and will be a TNC male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of type N and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to TNC low loss RF cable assembly as per your requirements. |
| 248 | ||
| PE3C8743/GR-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-GR, RF Cable Type: Belden 4694R-GR, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm BNC Male to 75 Ohm 1.0/2.3 Male 12G SDI Cable 12 Inch Length Using 75 Ohm 4694R-GR Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 12 inch length using 75 Ohm 4694R-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 12 inch length using 75 Ohm 4694R-GR coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 12G SDI BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8743/GR-12, can also be known as a 12G SDI BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to 1.0/2.3 plug cable assembly PE3C8743/GR-12 is built with belden 4694R-GR which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. PE3C8743/GR-12 can also be used in the other direction and will be 1.0/2.3 male to BNC male cable assembly if the opposite connectivity is required. 12G SDI BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 12 inch length using 75 Ohm 4694R-GR coax. |
| 209 | ||
| PE3C8746/GR-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-GR, RF Cable Type: Belden 4694R-GR, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 12G SDI Cable 12 Inch Length Using 75 Ohm 4694R-GR Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 12G SDI cable 12 inch length using 75 Ohm 4694R-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 12G SDI cable 12 inch length using 75 Ohm 4694R-GR coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 12G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8746/GR-12, can also be known as a 12G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8746/GR-12 is built with belden 4694R-GR which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. 12G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 12G SDI cable 12 inch length using 75 Ohm 4694R-GR coax. |
| 105 | ||
| PE3C8741/GR-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-GR, RF Cable Type: Belden 4694R-GR, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm BNC Male to 75 Ohm BNC Male 12G SDI Cable 120 Inch Length Using 75 Ohm 4694R-GR Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male 12G SDI cable 120 inch length using 75 Ohm 4694R-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male 12G SDI cable 120 inch length using 75 Ohm 4694R-GR coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our 12G SDI BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C8741/GR-120, can also be known as a 12G SDI BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to BNC plug cable assembly PE3C8741/GR-120 is built with belden 4694R-GR which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. 12G SDI BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male 12G SDI cable 120 inch length using 75 Ohm 4694R-GR coax. |
| 57 | ||
| PE3C8743/GR-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-GR, RF Cable Type: Belden 4694R-GR, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm BNC Male to 75 Ohm 1.0/2.3 Male 12G SDI Cable 120 Inch Length Using 75 Ohm 4694R-GR Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 120 inch length using 75 Ohm 4694R-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 120 inch length using 75 Ohm 4694R-GR coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 12G SDI BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8743/GR-120, can also be known as a 12G SDI BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to 1.0/2.3 plug cable assembly PE3C8743/GR-120 is built with belden 4694R-GR which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. PE3C8743/GR-120 can also be used in the other direction and will be 1.0/2.3 male to BNC male cable assembly if the opposite connectivity is required. 12G SDI BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 120 inch length using 75 Ohm 4694R-GR coax. |
| 57 | ||
| PE3C8746/GR-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-GR, RF Cable Type: Belden 4694R-GR, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 12G SDI Cable 120 Inch Length Using 75 Ohm 4694R-GR Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 12G SDI cable 120 inch length using 75 Ohm 4694R-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 12G SDI cable 120 inch length using 75 Ohm 4694R-GR coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 12G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8746/GR-120, can also be known as a 12G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8746/GR-120 is built with belden 4694R-GR which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. 12G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 12G SDI cable 120 inch length using 75 Ohm 4694R-GR coax. |
| 57 | ||
| PE3C0847/HSGR-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male to TNC Male Low Loss Cable 12 Inch Length Using PE-P142LL Coax., Radio frequency assembly SMA male to TNC male low loss cable 12 inch length using PE-P142LL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to TNC male low loss cable 12 inch length using PE-P142LL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and TNC cable connection on the other. Our low loss SMA to TNC cable assemblies have a male gender on end 1 and male on end 2. PE3C0847/HSGR-12 can also be known as a low loss SMA plug to TNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to TNC plug cable assembly PE3C0847/HSGR-12 is built with PE-P142LL which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency SMA male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C0847/HSGR-12 can also be used in the other direction and will be TNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to TNC male low loss cable 12 inch length using PE-P142LL coax. |
| 0 | ||
| PE3C8742/GR-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-GR, RF Cable Type: Belden 4694R-GR, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm BNC Male to 75 Ohm HD-BNC Male 12G SDI Cable 12 Inch Length Using 75 Ohm 4694R-GR Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm HD-BNC male 12G SDI cable 12 inch length using 75 Ohm 4694R-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm HD-BNC male 12G SDI cable 12 inch length using 75 Ohm 4694R-GR coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with BNC cable connection on one end and HD-BNC cable connection on the other. Our 12G SDI BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to HD-BNC cable is a male to male coax assembly, PE3C8742/GR-12, can also be known as a 12G SDI BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to HD-BNC plug cable assembly PE3C8742/GR-12 is built with belden 4694R-GR which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. PE3C8742/GR-12 can also be used in the other direction and will be HD-BNC male to BNC male cable assembly if the opposite connectivity is required. 12G SDI BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm HD-BNC male 12G SDI cable 12 inch length using 75 Ohm 4694R-GR coax. |
| 0 | ||
| PE3C8742/GR-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-GR, RF Cable Type: Belden 4694R-GR, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm BNC Male to 75 Ohm HD-BNC Male 12G SDI Cable 120 Inch Length Using 75 Ohm 4694R-GR Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm HD-BNC male 12G SDI cable 120 inch length using 75 Ohm 4694R-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm HD-BNC male 12G SDI cable 120 inch length using 75 Ohm 4694R-GR coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with BNC cable connection on one end and HD-BNC cable connection on the other. Our 12G SDI BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to HD-BNC cable is a male to male coax assembly, PE3C8742/GR-120, can also be known as a 12G SDI BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to HD-BNC plug cable assembly PE3C8742/GR-120 is built with belden 4694R-GR which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. PE3C8742/GR-120 can also be used in the other direction and will be HD-BNC male to BNC male cable assembly if the opposite connectivity is required. 12G SDI BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm HD-BNC male 12G SDI cable 120 inch length using 75 Ohm 4694R-GR coax. |
| 0 | ||
| PE3C8744/GR-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-GR, RF Cable Type: Belden 4694R-GR, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 12G SDI Cable 12 Inch Length Using 75 Ohm 4694R-GR Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 12G SDI cable 12 inch length using 75 Ohm 4694R-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 12G SDI cable 12 inch length using 75 Ohm 4694R-GR coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 12G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8744/GR-12, can also be known as a 12G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8744/GR-12 is built with belden 4694R-GR which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. 12G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 12G SDI cable 12 inch length using 75 Ohm 4694R-GR coax. |
| 0 | ||
| PE3C8744/GR-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-GR, RF Cable Type: Belden 4694R-GR, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 12G SDI Cable 120 Inch Length Using 75 Ohm 4694R-GR Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 12G SDI cable 120 inch length using 75 Ohm 4694R-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 12G SDI cable 120 inch length using 75 Ohm 4694R-GR coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 12G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8744/GR-120, can also be known as a 12G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8744/GR-120 is built with belden 4694R-GR which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. 12G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 12G SDI cable 120 inch length using 75 Ohm 4694R-GR coax. |
| 0 | ||
| PE3C8745/GR-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-GR, RF Cable Type: Belden 4694R-GR, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 12G SDI Cable 12 Inch Length Using 75 Ohm 4694R-GR Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 12 inch length using 75 Ohm 4694R-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 12 inch length using 75 Ohm 4694R-GR coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 12G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8745/GR-12, can also be known as a 12G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8745/GR-12 is built with belden 4694R-GR which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. PE3C8745/GR-12 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 12G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 12 inch length using 75 Ohm 4694R-GR coax. |
| 0 | ||
| PE3C8745/GR-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-GR, RF Cable Type: Belden 4694R-GR, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 12G SDI Cable 120 Inch Length Using 75 Ohm 4694R-GR Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 120 inch length using 75 Ohm 4694R-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 120 inch length using 75 Ohm 4694R-GR coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 12G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8745/GR-120, can also be known as a 12G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8745/GR-120 is built with belden 4694R-GR which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. PE3C8745/GR-120 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 12G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 120 inch length using 75 Ohm 4694R-GR coax. |
| 0 | ||
![]() Venkel Ltd. | CTL1206FGR1T | VENKEL LTD | Chip Type LED;1206;Flat Lens;Green(Yellow Green) RoHS : Compliant | 24,000 | ||
| CTL1206RGR1T | VENKEL LTD | Chip Type LED;1206;Right Angle Lens;Green(Yellow Green) RoHS : Compliant | 24,000 | |||
| CTL352819FGR1T | VENKEL LTD | Chip Type LED;352819;Flat Lens;Green RoHS : Compliant | 16,000 | |||
| CTL0805FGR1T | VENKEL LTD | Chip Type LED;0805;Flat Lens;Green(Yellow Green) RoHS : Compliant | 12,000 | |||
| CTL0402FGR1T-L | VENKEL LTD | Chip Type LED;0402;Flat Lens;Green(Yellow Green);Low Profile RoHS : Compliant | 0 | |||
| THL0304DGR1B | VENKEL LTD | Through Hole LED;0304;Dome Lens;Green RoHS : Not Compliant | 0 | |||
| CTL0603DGR1T | VENKEL LTD | Chip Type LED;0603;Dome Lens;Green(Yellow Green) RoHS : Compliant | 0 | |||
| MCL1204RRD1GR1T | VENKEL LTD | Multi-Color LED;1204;Right Angle Lens;Red;Green RoHS : Compliant | 0 | |||
| MCL0606FYW1GR1T | VENKEL LTD | Multi-Color LED;0606;Flat Lens;Yellow;Green RoHS : Compliant | 0 | |||
| MCL0603FRD1GR1T | VENKEL LTD | Multi-Color LED;0603;Flat Lens;Red;Green(Yellow Green) RoHS : Compliant | 0 | |||
| CTL0402FGR1T | VENKEL LTD | Chip Type LED;0402;Flat Lens;Green RoHS : Compliant | 0 | |||
| CTL1204RGR1T | VENKEL LTD | Chip Type LED;1204;Right Angle Lens;Green(Yellow Green) RoHS : Compliant | 0 | |||
| MCL0606FRD1GR1T | VENKEL LTD | Multi-Color LED;0606;Flat Lens;Red;Green(Yellow Green) RoHS : Compliant | 0 | |||
| CTL0201FGR1T | VENKEL LTD | Chip Type LED;0201;Flat Lens;Yellow Green RoHS : Compliant | 0 | |||
| MCLA30RRD1GR1B | VENKEL LTD | 3.0mm Round Red; Green LED Array RoHS : Not Compliant | 0 | |||
![]() Vyrian | SPM1804GR199 | Alpha Wire | Wire And Cable, 4 Conductor(s), 18AWG, 1000V, Tray Cable RoHS : Compliant | 16,567 | ||
| SPM1804CYGR199 | Alpha Wire | Wire And Cable, 4 Conductor(s), 18AWG, 1000V, Tray Cable RoHS : Compliant | 12,712 | |||
2PA1015GR,126![]() | NXP Semiconductors | Small Signal Bipolar Transistor, 0.15A I(C), 50V V(BR)CEO, 1-Element, PNP, Silicon, TO-92 RoHS : Compliant | 12,513 | |||
| MAX24011E-D-GR1 | Analog Devices (Maxim Integrated) | 12,079 | ||||
| PHY1095-01DS-GR1 | Analog Devices (Maxim Integrated) | 12,036 | ||||
| RGR1551-SC | Broadcom Limited | RoHS : Not Compliant | 9,714 | |||
| RGR1551-FP | Broadcom Limited | RoHS : Not Compliant | 8,942 | |||
| SGR117AT/883B | Microchip Technology Inc | Adjustable Positive Standard Regulator, 1.22V Min, 1.275V Max, BIPolar, MBCY3 RoHS : Not Compliant | 8,506 | |||
| SGR117AIG/883B | Microchip Technology Inc | Adjustable Positive Standard Regulator, 1.22V Min, 1.275V Max, BIPolar, PSFM3 RoHS : Not Compliant | 8,347 | |||
| RGR1551-ST | Broadcom Limited | RoHS : Not Compliant | 7,321 | |||
| KSY-GR133/128 | Kingston Technology Company | 7,138 | ||||
| MC908GR16ACFA | NXP Semiconductors | Microcontroller, CMOS | 5,715 | |||
| KSY-GR133/256 | Kingston Technology Company | 4,286 | ||||
| A22-GR-10M | OMRON Corporation | Pushbutton Switch, SPST, Momentary, Screw Terminal, Panel Mount RoHS : Compliant | 4,244 | |||
| SGR117AK/883B | Microchip Technology Inc | Adjustable Positive Standard Regulator, 1.22V Min, 1.275V Max, BIPolar, MBFM2 RoHS : Not Compliant | 3,061 | |||
![]() Win Source Electronics | UF2G-R1-00001 | PanJit Semiconductor |
| 75,030 | ||
| ER2G_R1_00001 | PanJit Semiconductor | SMB, SUPER / Diode Standard 400 V 2A Surface Mount SMB (DO-214AA) RoHS : Compliant |
| 4,000 | ||
| G3VM-81GR1 | OMRON Corporation | MOS FET Relays | SSR RELAY SPST-NO 200MA 0-80V RoHS : Compliant |
| 2,300 | ||
| EC25EUXGR-128-SGNS | Quectel Wireless Solutions Co Ltd | RF TXRX MOD CELL/NAV CARD EDGE / Transceiver Module |
| 1,000 |
| Lei ha avuto il aiuto da alldatasheet? [ DONATE ] |
Di alldatasheet | Richest di pubblicita | contatti | Privacy Policy | Collegamento alla scheda tecnica | scambio Link | Ricerca produttore All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |