| Motore di ricerca datesheet componenti elettronici |
|
MP24 Reseller |
| Reseller | Il numero della parte | Produttore elettronici | Spiegazioni elettronici | Price | Qty. BuyNow | |
![]() Verical | MP2460GJ-Z | Monolithic Power Systems | Conv DC-DC 4.5V to 45V Synchronous Step Down Single-Out 0.8V to 44.1V 0.6A 6-Pin TSOT-23 RoHS : Compliant |
| 6,000 | |
| MP2459GJ-Z | Monolithic Power Systems | Conv DC-DC 4.5V to 55V Step Down Single-Out 0.81V to 52.25V 0.5A 6-Pin TSOT-23 T/R RoHS : Compliant |
| 6,000 | ||
| MP2456GJ-Z | Monolithic Power Systems | Conv DC-DC 4.5V to 50V Step Down Single-Out 0.81V to 45V 0.5A 6-Pin TSOT-23 T/R RoHS : Compliant |
| 6,000 | ||
| MP240D4 | Crydom Inc | Solid State Relay 32V DC-IN 4A 280V AC-OUT 4-Pin SIP RoHS : Compliant |
| 805 | ||
| MP24M23G10 | Amphenol Corporation | Contact PIN 16 Size Crimp ST Cable Mount 24-26AWG eco/mate® RoHS : Compliant |
| 475 | ||
| MP24W23F | Amphenol Sine Systems | Contact PIN 20 Size Crimp ST Cable Mount 24-26AWG eco/mate® RoHS : Compliant |
| 434 | ||
| MP240 | CTS Corporation | Crystal 24MHz ±30ppm (Tol) ±50ppm (Stability) Series 3rd Overtone 55Ohm 2-Pin HC-49/US Thru-Hole Bulk RoHS : Compliant |
| 350 | ||
| MP240D3 | Crydom Inc | Solid State Relay 32V DC-IN 3A 280V AC-OUT 4-Pin SIP RoHS : Compliant |
| 169 | ||
| MP 2419 | FIBOX | MP 2419 |
| 102 | ||
| MP240D4 | Sensata Technologies | Solid State Relay 32V DC-IN 4A 280V AC-OUT 4-Pin SIP RoHS : Compliant |
| 45 | ||
| MP240D2 | Opto 22 | Relay SSR 240V AC-IN 4-Pin |
| 33 | ||
| MP240D3 | Sensata Technologies | Solid State Relay 32V DC-IN 3A 280V AC-OUT 4-Pin SIP RoHS : Compliant |
| 30 | ||
| MP240D3 | Crydom Inc | Solid State Relay 32V DC-IN 3A 280V AC-OUT 4-Pin SIP RoHS : Compliant |
| 27 | ||
| MP240D4 | Sensata Technologies | Solid State Relay 32V DC-IN 4A 280V AC-OUT 4-Pin SIP RoHS : Compliant |
| 27 | ||
| MP240D4-17 | Opto 22 | Relay SSR 280V AC-IN 4-Pin |
| 7 | ||
![]() Avnet Americas | ECLAMP2454P.TCT | Semtech Corporation | - Tape and Reel (Alt: ECLAMP2454P.TCT) RoHS : Not Compliant |
| 12,000 | |
| ECLAMP2410P.TCT | Semtech Corporation | EMI Filter Flat Style SMD T/R - Tape and Reel (Alt: ECLAMP2410P.TCT) RoHS : Not Compliant |
| 6,000 | ||
| MP2459GJ-Z | Monolithic Power Systems | DC/DC Switching Regulator, Adjustable, Buck (Step Down), Single Output, 0.81 V to 52.25 V, 500 mA - Tape and Reel (Alt: MP2459GJ-Z) RoHS : Compliant |
| 3,000 | ||
| HLMP-2450 | Broadcom Limited | - Rail/Tube (Alt: HLMP-2450) RoHS : Compliant |
| 1,792 | ||
| MP240 | CTS Corporation | - Bulk (Alt: MP240) RoHS : Compliant |
| 36 | ||
| M12CFM-P24STPC-RFSR-FL-10 | Omega Engineering | M12 CABLES WITH FIELD MOUNTABLE CONNECTORS FOR RESISTANCE SENSORS (RTDS) - Bulk (Alt: M12CFM-P24STPC-RFSR-FL-10) RoHS : Compliant |
| 0 | ||
| UCLAMP2482PWQ.C | Semtech Corporation | ?Clamp ESD Protection - Bulk (Alt: UCLAMP2482PWQ.C) RoHS : Not Compliant | 0 | |||
| G88MP24005C1HR | Amphenol Corporation | - Tape and Reel (Alt: G88MP24005C1HR) RoHS : Not Compliant |
| 0 | ||
| MP2489DJ-LF-P | Monolithic Power Systems | - Tape and Reel (Alt: MP2489DJ-LF-P) RoHS : Compliant |
| 0 | ||
| RCLAMP2431T.TCT | Semtech Corporation | Diode TVS Single Bi-Directional 24V 100W 2-Pin SLP T/R - Tape and Reel (Alt: RCLAMP2431T.TCT) RoHS : Not Compliant |
| 0 | ||
| MP2410BGJ-Z | Monolithic Power Systems | - Tape and Reel (Alt: MP2410BGJ-Z) RoHS : Compliant | 0 | |||
| MP245B-E | CTS Corporation | - Bulk (Alt: MP245B-E) RoHS : Compliant |
| 0 | ||
MP2481DH-LF-P![]() | Monolithic Power Systems | LED DRVR Buck-Boost 1-CH Analog/PWM 1.2A 8-Pin MSOP EP T/R - Tape and Reel (Alt: MP2481DH-LF-P) RoHS : Compliant |
| 0 | ||
| MP2494DN-LF-P | Monolithic Power Systems | Converter DC to DC Step-Down 4.5V to 55V 2A 8-Pin SOIC-E T/R - Tape and Reel (Alt: MP2494DN-LF-P) RoHS : Compliant |
| 0 | ||
| M12CFM-P24STPC-SFSR-FL-15 | Omega Engineering | M12 CABLES WITH FIELD MOUNTABLE CONNECTORS FOR RESISTANCE SENSORS (RTDS) - Bulk (Alt: M12CFM-P24STPC-SFSR-FL-15) RoHS : Not Compliant |
| 0 | ||
![]() Mouser Electronics | MP2459GJ-P | Monolithic Power Systems | Switching Voltage Regulators 0.5A, 55V, 480kHz Step-Down Converter RoHS : Compliant |
| 42,662 | |
| MP24M23F | Amphenol Corporation | Standard Circular Contacts Pin Contact Sz 16 Wire 24-26AWG RoHS : Compliant |
| 42,465 | ||
| MP24833-AGN-Z | Monolithic Power Systems | LED Lighting Driver ICs 3A 200kHz Internal Power MOSFET RoHS : Compliant |
| 36,725 | ||
| MP2489DN-LF-Z | Monolithic Power Systems | LED Lighting Driver ICs 6V-60V 1A Buck LED Driver RoHS : Compliant |
| 23,766 | ||
| MP2456GJ-Z | Monolithic Power Systems | Switching Voltage Regulators 50V,500mA,1.2MHz Buck in a TSOT23-6 RoHS : Compliant |
| 21,194 | ||
| MP2456GJ-P | Monolithic Power Systems | Switching Voltage Regulators 0.5A, 50V, 1.2MHz Step-Down Converter RoHS : Compliant |
| 6,456 | ||
| MP2489DJ-LF-Z | Monolithic Power Systems | LED Lighting Driver ICs 6V-60V 1A Buck LED Driver RoHS : Compliant |
| 4,626 | ||
| MP2451DJ-LF-Z | Monolithic Power Systems | Switching Voltage Regulators 600mA/36V, 2MHz Non- sync Buck in TSOT23 RoHS : Compliant |
| 2,991 | ||
| MP2457GJ-Z | Monolithic Power Systems | Switching Voltage Regulators 36V, 0.6A, 2MHz, Synchronous, Step-Down Converter |
| 2,717 | ||
| MP2494DS-LF-Z | Monolithic Power Systems | Switching Voltage Regulators 2A, 55V, 100kHz Step Down Converter RoHS : Compliant |
| 2,121 | ||
| MP2451DJ-LF-P | Monolithic Power Systems | Switching Voltage Regulators 600mA/36V, 2MHz Non- sync Buck in TSOT23 RoHS : Compliant |
| 1,595 | ||
| MP2480DN-LF-Z | Monolithic Power Systems | LED Lighting Driver ICs 3A 36V Buck w/LED Driver RoHS : Compliant |
| 1,066 | ||
| MP2452DD-LF-P | Monolithic Power Systems | Switching Voltage Regulators 1A 36V 1MHz Non-sync Buck RoHS : Compliant |
| 1,044 | ||
| MP24M23G30 | Amphenol Corporation | Standard Circular Contacts Pin Contact, Machined, Size 16, Gold 30", Wire Range .14-.25mm, 26-24 AWG RoHS : Compliant |
| 530 | ||
| MP240D2 | Opto 22 | Solid State Relays - PCB Mount MP Model, 240 VAC, 2 Amp, DC Control Solid State Relay (SSR) RoHS : Compliant |
| 81 | ||
![]() Arrow Electronics | MP24833-AGN-Z | Monolithic Power Systems | White LED Driver RoHS : Compliant |
| 7,500 | |
| MP2460GJ-Z | Monolithic Power Systems | Conv DC-DC 4.5V to 45V Synchronous Step Down Single-Out 0.8V to 44.1V 0.6A 6-Pin TSOT-23 RoHS : Compliant |
| 6,000 | ||
| MP2451DT-LF-Z | Monolithic Power Systems | Conv DC-DC 3.3V to 36V Step Down Single-Out 0.8V to 28.8V 0.6A 6-Pin SOT-23 T/R RoHS : Compliant |
| 6,000 | ||
| MP2459GJ-Z | Monolithic Power Systems | Conv DC-DC 4.5V to 55V Step Down Single-Out 0.81V to 52.25V 0.5A 6-Pin TSOT-23 T/R RoHS : Compliant |
| 6,000 | ||
| MP2456GJ-Z | Monolithic Power Systems | Conv DC-DC 4.5V to 50V Step Down Single-Out 0.81V to 45V 0.5A 6-Pin TSOT-23 T/R RoHS : Compliant |
| 6,000 | ||
| MP2491CGQB-Z | Monolithic Power Systems | Conv DC-DC 4V to 32V Synchronous Step Down Single-Out 0.5V to 30V 6A 13-Pin QFN T/R RoHS : Compliant |
| 5,000 | ||
| MP240D3 | Crydom Inc | Solid State Relay 32V DC-IN 3A 280V AC-OUT 4-Pin SIP RoHS : Compliant |
| 169 | ||
![]() Newark | UCLAMP2411ZATFT | Semtech Corporation | Dio, Transient, 45V, Bidirectional, 24V; |Semtech UCLAMP2411ZATFT RoHS : Compliant |
| 13,449 | |
| UCLAMP2411ZATFT | Semtech Corporation | Dio, Transient, 45V, Bidirectional, 24V; |Semtech UCLAMP2411ZATFT RoHS : Compliant |
| 13,449 | ||
| RCLAMP2431T.TCT | Semtech Corporation | Dio, Transient, 50V, Bidirectional, 24V; |Semtech RCLAMP2431T.TCT RoHS : Compliant |
| 3,103 | ||
| RCLAMP2431T.TCT | Semtech Corporation | Dio, Transient, 50V, Bidirectional, 24V; |Semtech RCLAMP2431T.TCT RoHS : Compliant |
| 3,103 | ||
| ECLAMP2458P.TCT | Semtech Corporation | Ic, emi Filter, llcc,16Pin, plastic; |Semtech ECLAMP2458P.TCT RoHS : Not Compliant |
| 3,000 | ||
| MP24833-AGN-Z | Monolithic Power Systems | Led Driver; |Monolithic Power Systems (Mps) MP24833-AGN-Z RoHS : Compliant |
| 2,374 | ||
| MP24833-AGN-Z | Monolithic Power Systems | Led Driver; |Monolithic Power Systems (Mps) MP24833-AGN-Z RoHS : Compliant |
| 2,374 | ||
MP2481DH-LF-P![]() | Monolithic Power Systems | Led Driver, Buck, 1.4Mhz, Hmsop; |Monolithic Power Systems (Mps) MP2481DH-LF-P RoHS : Compliant |
| 554 | ||
MP2481DH-LF-P![]() | Monolithic Power Systems | Led Driver, Buck, 1.4Mhz, Hmsop; |Monolithic Power Systems (Mps) MP2481DH-LF-P RoHS : Compliant |
| 554 | ||
| SSRMP-240D25 | TE Connectivity | Solid State Relay, 24-280Vac, 25A, Panel; Contact Configuration:Spst-No; Load Current:25A; Operating Voltage Max:280Vac; Relay Mounting:Panel Mount; Relay Terminals:Quick Connect; Switching Mode:Zero Crossing Rohs Compliant: Yes RoHS : Compliant |
| 473 | ||
| ECLAMP2465T.TCT | Semtech Corporation | Esd Protection Device, 5V, Slp1713P8T-8; |Semtech ECLAMP2465T.TCT RoHS : Compliant |
| 233 | ||
| ECLAMP2465T.TCT | Semtech Corporation | Esd Protection Device, 5V, Slp1713P8T-8; |Semtech ECLAMP2465T.TCT RoHS : Compliant |
| 233 | ||
| SSRMP-240D16R | TE Connectivity | Solid State Relay, Spst, 16A, 24-280Vac; |Te Connectivity Potter&brumfield SSRMP-240D16R RoHS : Compliant |
| 225 | ||
| MP-24-01L-1-TGG | SPC Multicomp | Conn Rf/Coax, Smb Coaxial, Straight Plug; |Multicomp Pro MP-24-01L-1-TGG RoHS : Compliant |
| 199 | ||
| SSRMP-240D16 | TE Connectivity | Solid State Relay, 24-280Vac, 16A, Panel; Contact Configuration:Spst-No; Load Current:16A; Operating Voltage Max:280Vac; Relay Mounting:Panel Mount; Relay Terminals:Quick Connect; Switching Mode:Zero Crossing Rohs Compliant: Yes RoHS : Compliant |
| 3 | ||
![]() RS | MP240D4 (NULL) | Opto 22 | SOLID STATE RELAY, 280 VAC, SPST-NO, 4A/240VAC, ZERO SWITCHING, MP SERIES |
| 194 | |
PMP2425W![]() | Crydom Inc | SOLID STATE RELAY, 10 VDC, SPST-NO, 25A/280V, ZERO SWITCHING, PMP SERIES RoHS : Compliant |
| 86 | ||
PMP2425WP![]() | Crydom Inc | SOLID STATE RELAY, 10 VDC, SPST-NO, 25A/280VAC, ZERO SWITCHING, PMP SERIES RoHS : Compliant |
| 78 | ||
| MP240D3 | Crydom Inc | RELAY, 0.02 TO 3 A (RMS), 24 TO 280 V (RMS) @ 47 TO 63 HZ, AC RoHS : Compliant |
| 30 | ||
| MP240D4 | Crydom Inc | RELAY, 0.02 TO 4 A (RMS), 24 TO 280 V (RMS) @ 47 TO 63 HZ, AC RoHS : Compliant |
| 18 | ||
| DRA1-MP240D3 | Crydom Inc | RELAY; SOLID STATE; DIN MOUNT; 280 VAC/3 A OUTPUT; 3-32 VDC INPUT RoHS : Compliant |
| 14 | ||
PMP2425WH![]() | Crydom Inc | PROPORTIONAL CONTROL SSR, MULTIFUNCTION, PANEL MOUNT, 280VAC/25A, TP RoHS : Compliant |
| 7 | ||
PMP2450W![]() | Crydom Inc | PROPORTIONAL CONTROL SSR MULTIFUNCTION PANEL MOUNT 280VAC/50A RoHS : Compliant |
| 6 | ||
PMP2450WP![]() | Crydom Inc | PROPORTIONAL CONTROL SSR, MULTIFUNCTION, PANEL MOUNT, 280VAC/50A, IOP RoHS : Compliant |
| 5 | ||
| MP 2419 (5518024) | FIBOX | SHEET STEEL METAL MOUNTING PLATE FOR TEMPO |
| 5 | ||
PMP2450WPH![]() | Crydom Inc | PROPORTIONAL CONTROL SSR, MULTIFUNCTION, PANEL MOUNT, 280VAC/50A, IOP, TP RoHS : Compliant |
| 3 | ||
| M/P24121/4 | Norgren | CYLINDER ACCESSORY/REPLACEMENT PART, INDICATOR C/W GASKET, 24VDC |
| 2 | ||
| MP2-42G10L1 | ABB Low Voltage Products and Systems | PB MAIN FLSH GRN 1NO LED 130V |
| 2 | ||
| M12CFM-P24STPC-SFSR-FL-3 | Omega Engineering | RTD S, M12 RTD PROBES ALSO M8 , M12 RTD EXT CABLE |
| 2 | ||
| FM-MP2-40-KIT | Bimba Manufacturing Company | MOUNTING KIT, FOR 4IN BORE, MP2 SERIES |
| 1 | ||
![]() Onlinecomponents.com | MP2402A.41 | Belden Inc | RoHS : Compliant |
| 0 | |
| MP2402A-BLK | Belden Inc | RoHS : Compliant |
| 0 | ||
| MP2402A-BLK-1000 | Belden Inc | RoHS : Compliant |
| 0 | ||
| MP240D4-MS11 | Crydom Inc | SOLID STATE RELAY 24-280 V - DIN Mt 280 VAC/3A out 3-32 VDC input,ZC RoHS : Compliant |
| 0 | ||
| MP24W23G15 | Amphenol Sine Systems | Pin Contact, Machined, Gold 15µ", Wire Range .13-.25mm², 26-24 AWG RoHS : Compliant |
| 0 | ||
| MP24GS | Thomas & Betts | Pos-E-Kon™ Male Crimp Pin - Copper Alloy - Gold Plated - 28-24AWG/0.25 mm² - 5 Amp - 63 VAC RoHS : Compliant |
| 0 | ||
| MP2426 | Cooper Crouse-Hinds | MP2426 RoHS : Compliant |
| 0 | ||
| MP2402A.99 | Belden Inc | RoHS : Compliant |
| 0 | ||
| MP24W23G30 | Amphenol Sine Systems | Pin Contact, Machined, Gold 30µ", Wire Range .13-.25mm², 26-24 AWG RoHS : Compliant |
| 0 | ||
| MP240 | CTS Corporation | Crystal 24MHz ±30ppm (Tol) ±50ppm (Stability) Series FUND 25Ohm 2-Pin HC-49/US Thru-Hole Bulk RoHS : Compliant |
| 0 | ||
| MP240-E | CTS Corporation | 0024.000000 MHZ CRYSTAL RoHS : Compliant |
| 0 | ||
| MP240A | CTS Corporation | 0024.000000 MHZ CRYSTAL RoHS : Compliant |
| 0 | ||
| MP240A-E | CTS Corporation | 0024.000000 MHZ CRYSTAL RoHS : Compliant |
| 0 | ||
| MP240B-E | CTS Corporation | 0024.000000 MHZ CRYSTAL RoHS : Compliant |
| 0 | ||
| MP245-E | CTS Corporation | 0024.576000 MHZ CRYSTAL RoHS : Compliant |
| 0 | ||
![]() Rochester Electronics | ECLAMP2410P.TCT | Semtech Corporation | EMI Filter RC (Pi) R = 45Ohm, C = 12pF 16-SON T/R RoHS : Compliant |
| 10,653 | |
| ECLAMP2410PQTCT | Semtech Corporation | EMI Filter RC (Pi) R = 45Ohm, C = 15pF T/R RoHS : Compliant |
| 9,000 | ||
| ECLAMP2454P.TCT | Semtech Corporation | EMI Filter LC (Pi) 155MHz (Cutoff) L = 28nH, C = 12pF 8-SON T/R RoHS : Compliant |
| 1,000 | ||
| ECLAMP2455K.TCT | Semtech Corporation | EMI FILTER Low Pass RC (Pi) 8-SON T/R RoHS : Compliant |
| 371 | ||
| ECLAMP2455P.TCT | Semtech Corporation | EMI FILTER Low Pass RC (Pi) 8-SON T/R RoHS : Compliant |
| 25,095 | ||
| ECLAMP2456P.TCT | Semtech Corporation | EMI Filter LC (Pi) 155MHz (Cutoff) L = 28nH, C = 12pF 12-SON T/R RoHS : Compliant |
| 1,500 | ||
| ECLAMP2458P.TCT | Semtech Corporation | EMI Filter LC (Pi) 155MHz (Cutoff) L = 28nH, C = 12pF 16-SON T/R RoHS : Compliant |
| 27,820 | ||
| RCLAMP2431T.TCT | Semtech Corporation | TVS Diode Zener Bi-Directional 24V (Max) 50V SOD-882 T/R RoHS : Compliant |
| 33,409 | ||
| UCLAMP2461P.TNT | Semtech Corporation | TVS Diode Zener Uni-Directional 24V (Max) 65V 2-SON T/R RoHS : Compliant |
| 50,000 | ||
![]() Sager | MP240D3 | Crydom Inc | Solid State Relays - PCB Mount PCB SIP SSR 280VAC 3A, 3-32VDC, ZC RoHS : Compliant |
| 67 | |
| DRA1-MP240D3 | Crydom Inc | Solid State Relays - Industrial Mount DIN Mt 280 VAC/3A out 3-32 VDC input RoHS : Compliant |
| 13 | ||
PMP2490WH![]() | Crydom Inc | Solid State Relays - Industrial Mount 90A 90-280VAC TP, Elevator Screw RoHS : Compliant |
| 0 | ||
PMP2490WPH![]() | Crydom Inc | Solid State Relays - Industrial Mount 90A 90-280VAC IOP/TP Elevator Scrw RoHS : Compliant |
| 0 | ||
| LW6MP-24MW | IDEC Corporation | Pushbutton Switches 25mm Pilot Light White | 0 | |||
| 8005-MP-24 | IDEC Corporation | IDEC Corporation | 0 | |||
| LW6MP-24Y | IDEC Corporation | Pushbutton Switches 25mm Pilot Light Yellow |
| 0 | ||
| DRA1-MP240D4 | Crydom Inc | Solid State Relays - Industrial Mount DIN Mt 280 VAC/4A out 3-32 VDC input RoHS : Compliant |
| 0 | ||
| LW6MP-24G | IDEC Corporation | Pushbutton Switches 25mm Pilot Light Green |
| 0 | ||
| MP240D2 | Crydom Inc | Solid State Relays - PCB Mount PCB SIP SSR 280VAC /2A, 3-32VDC, ZC | 0 | |||
PMP2450W![]() | Crydom Inc | Solid State Relays - Industrial Mount 50A 90-280VAC Elevator Screw RoHS : Compliant |
| 0 | ||
| WDMP.2458.A | Taoglas Antenna Solutions | WDMP.2458.A Wi-Fi Including Wi-Fi 6 Mechanical Patch Antenna |
| 0 | ||
| LW6MP-24A | IDEC Corporation | Pushbutton Switches 25mm Pilot Light Amber |
| 0 | ||
| LW6MP-24MR | IDEC Corporation | Pushbutton Switches 25mm Pilot Light Red |
| 0 | ||
| LW6MP-24R | IDEC Corporation | Pushbutton Switches 25mm Pilot Light Red |
| 0 | ||
![]() TME | MP24M23F | Amphenol Corporation | Contact; male; RM; copper alloy; gold-plated; 26AWG÷24AWG; crimped RoHS : Compliant |
| 5,600 | |
| S-9 LED LAMP 24V G | Auspicious Electrical Engineering Co Ltd | LED lamp; BA9S; green; 24VDC; 24VAC |
| 1,322 | ||
| S-9, LED LAMP 24V R | Auspicious Electrical Engineering Co Ltd | LED lamp; BA9S; red; 24VDC; 24VAC |
| 1,317 | ||
| MP2456GJ-Z | Monolithic Power Systems | PMIC; DC/DC converter; Uin: 4.5÷50VDC; Uout: 0.81÷45VDC; 0.5A; SMD RoHS : Compliant |
| 473 | ||
MP2459GJ-P![]() | Monolithic Power Systems | PMIC; DC/DC converter; Uin: 4.5÷55VDC; Uout: 0.81÷52.25VDC; 0.5A |
| 33 | ||
PMP2425WH![]() | Crydom Inc | Relay: solid state; Ucntrl: 8÷30VDC; 25A; 90÷280VAC; PMP; 1-phase RoHS : Compliant |
| 0 | ||
PMP2490W![]() | Crydom Inc | Relay: solid state; Ucntrl: 8÷30VDC; 90A; 90÷280VAC; PMP; 1-phase RoHS : Compliant |
| 0 | ||
PMP2450WP![]() | Crydom Inc | Relay: solid state; Ucntrl: 8÷30VDC; 50A; 90÷280VAC; PMP; 1-phase RoHS : Compliant |
| 0 | ||
PMP2425WPH![]() | Crydom Inc | Relay: solid state; Ucntrl: 8÷30VDC; 25A; 90÷280VAC; PMP; 1-phase RoHS : Compliant |
| 0 | ||
| MP2451DJ-LF-P | Monolithic Power Systems | PMIC; DC/DC converter; Uin: 3.3÷36VDC; Uout: 0.8÷28.8VDC; 0.6A |
| 0 | ||
| RCLAMP2431T.TCT | Semtech Corporation | Diode: TVS; ESD; 100W; 26.7÷36V; 2A; bidirectional; SLP1006P2T RoHS : Compliant |
| 0 | ||
PMP2425W![]() | Crydom Inc | Relay: solid state; Ucntrl: 8÷30VDC; 25A; 90÷280VAC; PMP; 1-phase RoHS : Compliant |
| 0 | ||
PMP2450WPH![]() | Crydom Inc | Relay: solid state; Ucntrl: 8÷30VDC; 50A; 90÷280VAC; PMP; 1-phase RoHS : Compliant |
| 0 | ||
| BE42MP/24 | Beta Electric | Wrench: combination spanner; 24mm; Overall len: 280mm; 42LMP |
| 0 | ||
PMP2450WH![]() | Crydom Inc | Relay: solid state; Ucntrl: 8÷30VDC; 50A; 90÷280VAC; PMP; 1-phase RoHS : Compliant |
| 0 | ||
![]() Ameya Holding Limited | RCLAMP2451ZATFT | Semtech Corporation | TVS DIODE 24V 7V RoHS : Compliant | 330,308 | ||
| ECLAMP2465T.TCT | Semtech Corporation | ECLAMP2465 Series EMI Filter / Line Termination Device / TVS Diode For SIM Card RoHS : Compliant | 152,391 | |||
| ECLAMP2458P.TCT | Semtech Corporation | ECLAMP2455P Series 10 V 12 pF ESD-EMI 8-line Protection for Color LCD Interface RoHS : Compliant | 36,110 | |||
| ECLAMP2410P.TCT | Semtech Corporation | ECLAMP2410P Series 12 pF Bi-Directional SMT ESD Protection Device - SLP4016P16 RoHS : Compliant | 32,241 | |||
| ECLAMP2455K.TCT | Semtech Corporation | ECLAMP2455K Series 10 V Bi-Directional ESD/EMI Protection TVS Diode - SLP-1713P8 RoHS : Compliant | 31,541 | |||
| ECLAMP2454P.TCT | Semtech Corporation | ECLAMP2454P Series 12 pF Bi-Directional SMT ESD/EMI Protection - SLP2116P8 RoHS : Compliant | 26,923 | |||
| ECLAMP2410PQTCT | Semtech Corporation | RoHS : Compliant | 20,550 | |||
| RCLAMP2431TQTCT | Semtech Corporation | RCLAMP Series 45 Vcl Ultra-Low Capacitance 1-Line ESD Protection RoHS : Compliant | 13,346 | |||
| RCLAMP2451ZATNT | Semtech Corporation | 11,170 | ||||
![]() ComSIT USA | MP2459GJZ | Monolithic Power Systems | AVAILABLE EU | 37,891 | ||
![]() ComSIT USA | RCLAMP2402BTCT | Semtech Corporation | ULTRA-LOW CAPACITANCE TVS FOR ESD AND CDE PROTECTION Trans Voltage Suppressor Diode, 200W, 24V V(RWM), Unidirectional, 2 Element, Silicon RoHS : Compliant | 2,465 | ||
| ECLAMP2410PTCT | Semtech Corporation | ESD PROTECTION DEVICE FOR T-FLASH/MICROSD INTERFACE Trans Voltage Suppressor Diode, 5V V(RWM), Bidirectional, 7 Element, Silicon RoHS : Compliant | 2,115 | |||
| ECLAMP2455KDKR | Semtech Corporation | Electronic Component RoHS : Not Compliant | 985 | |||
| MP2451DTLFZ | Monolithic Power Systems | 36 VOLT, 2MHZ, 0.6 AMP STEP-DOWN CONVERTER Switching Regulator, Current-mode, 0.85A, 2400kHz Switching Freq-Max, PDSO6 RoHS : Compliant | 500 | |||
| HLMP2450CATF | Avago Technologies | LED LIGHT BAR Single Color LED, Yellow, 19.05mm RoHS : Compliant | 240 | |||
![]() PEI Genesis | DDMP24H7PJK87 | ITT Interconnect Solutions | RoHS : Compliant |
| 0 | |
| DDMP24X7PJK127 | ITT Interconnect Solutions | RoHS : Not Compliant |
| 0 | ||
| DDMP24H7SJA197 | ITT Interconnect Solutions | RoHS : Compliant |
| 0 | ||
| DDMMP24X7PJ | ITT Interconnect Solutions | RoHS : Not Compliant |
| 0 | ||
| MP24W23G30 | Amphenol Sine Systems |
| 0 | |||
| DDMMP24X7PN | ITT Interconnect Solutions |
| 0 | |||
| DDMMP24C7PJ | ITT Interconnect Solutions | RoHS : Not Compliant |
| 0 | ||
| MP24M23G10 | Amphenol Sine Systems |
| 0 | |||
| DDMMP24X7SJ | ITT Interconnect Solutions | RoHS : Not Compliant |
| 0 | ||
| DDMMP24H7PJA101 | ITT Interconnect Solutions |
| 0 | |||
| DDMP24H7SJA101 | ITT Interconnect Solutions |
| 0 | |||
| DDMMP24H7SJA101H | ITT Interconnect Solutions |
| 0 | |||
| DDMP24W7PJK87 | ITT Interconnect Solutions | RoHS : Compliant |
| 0 | ||
| MP24W23G15 | Amphenol Sine Systems |
| 0 | |||
| MP24M23G5 | Amphenol Sine Systems |
| 0 | |||
![]() Chip 1 Exchange | HLMP-2400 | Avago Technologies | INSTOCK RoHS : Compliant | 4,320 | ||
| MP2451DJ-LF-Z | Monolithic Power Systems | INSTOCK RoHS : Compliant | 3,000 | |||
| JT1AS-TMP-24V | Panasonic Electronic Components | INSTOCK | 1,846 | |||
| JT1AS-TMP-24V | INSTOCK | 1,800 | ||||
| MP2459GJ-Z | Monolithic Power Systems | INSTOCK RoHS : Compliant | 520 | |||
![]() Avnet Abacus | MP24M23F | Amphenol Corporation | (Alt: MP24M23F) RoHS : Compliant | 3,500 | ||
| MP240B | CTS Corporation | (Alt: MP240B) RoHS : Compliant | 0 | |||
| MP240A | CTS Corporation | (Alt: MP240A) RoHS : Compliant | 0 | |||
| MP245B | CTS Corporation | (Alt: MP245B) RoHS : Compliant | 0 | |||
| MP240-E | CTS Corporation | (Alt: MP240-E) RoHS : Compliant | 0 | |||
| MP245-E | CTS Corporation | (Alt: MP245-E) RoHS : Compliant | 0 | |||
| MP245B-E | CTS Corporation | (Alt: MP245B-E) RoHS : Compliant | 0 | |||
| MP240A-E | CTS Corporation | (Alt: MP240A-E) RoHS : Compliant | 0 | |||
| MP240B-E | CTS Corporation | (Alt: MP240B-E) RoHS : Compliant | 0 | |||
| MP24M23G5 | Amphenol Corporation | (Alt: MP24M23G5) RoHS : Compliant | 0 | |||
| MP24M23G10 | Amphenol Corporation | (Alt: MP24M23G10) RoHS : Compliant | 0 | |||
| JM1ANTMP24FT | Panasonic Electronic Components | PowerRelay 1FormA Single side stable TMP Slim type (Alt: JM1ANTMP24FT) RoHS : Compliant | 0 | |||
| JTV1ASTMP24T | Panasonic Electronic Components | Electromechanical Relay SPSTNO 30A 24VDC 576Ohm Top Mount (Alt: JTV1ASTMP24T) RoHS : Compliant | 0 | |||
| JM1ANZTMP24FT | Panasonic Electronic Components | PowerRelay 1FormA Single side stable TMP Flat type (Alt: JM1ANZTMP24FT) RoHS : Compliant | 0 | |||
| DL CRIMP 24-26 50AU(T)NOBUMP | ITT Interconnect Solutions | Rectangular Power Contact ITT Cannon DL Gold Plated Contacts Copper Socket Crimp 26 AWG (Alt: 030-2492-001) RoHS : Compliant | 0 | |||
![]() Avnet Asia | G87MP241202PHR | Amphenol Corporation | (Alt: G87MP241202PHR) RoHS : Compliant | 0 | ||
| G87MP242205THR | Amphenol Corporation | (Alt: G87MP242205THR) RoHS : Compliant | 0 | |||
RCLAMP2402B.TCT![]() | Semtech Corporation | (Alt: RCLAMP2402B.TCT) RoHS : Compliant | 0 | |||
| ECLAMP2455P.TCT | Semtech Corporation | EMI Filter Flat Style SMD T/R (Alt: ECLAMP2455P.TCT) RoHS : Compliant | 0 | |||
| ECLAMP2410PQTCT | Semtech Corporation | EMI Filter with Integrated ESD Protection 12pF 40dB 5V Flat Style SMD 16-Pin SLP4016P16 T/R (Alt: ECLAMP2410PQTCT) RoHS : Compliant | 0 | |||
| G87MP241212C5HR | Amphenol Corporation | (Alt: G87MP241212C5HR) RoHS : Compliant | 0 | |||
| G88MP24102CEU | Amphenol Corporation | (Alt: G88MP24102CEU) RoHS : Compliant | 0 | |||
| G87MP242202THR | Amphenol Corporation | (Alt: G87MP242202THR) RoHS : Compliant | 0 | |||
| G88MP241020DREU | Amphenol Corporation | (Alt: G88MP241020DREU) RoHS : Compliant | 0 | |||
| G87MP242515THR | Amphenol Corporation | (Alt: G87MP242515THR) RoHS : Compliant | 0 | |||
| G88MP241024A1SRHR | Amphenol Corporation | (Alt: G88MP241024A1SRHR) RoHS : Compliant | 0 | |||
| G88MP24025C1HR | Amphenol Corporation | (Alt: G88MP24025C1HR) RoHS : Compliant | 0 | |||
UCLAMP2401T.TCT![]() | Semtech Corporation | (Alt: UCLAMP2401T.TCT) RoHS : Compliant |
| 0 | ||
| G88MP241324CR5EU | Amphenol Corporation | (Alt: G88MP241324CR5EU) RoHS : Compliant | 0 | |||
![]() Avnet Silica | ECLAMP2457K.C | Semtech Corporation | ESDEMI 4line Protection (Alt: ECLAMP2457K.C) RoHS : Compliant | 90,000 | ||
| MP24895-AGH-Z | Monolithic Power Systems | (Alt: MP24895-AGH-Z) RoHS : Compliant | 85,000 | |||
| MP2496GR-Z | Monolithic Power Systems | (Alt: MP2496GR-Z) RoHS : Compliant | 0 | |||
| MP2462GJ-Z | Monolithic Power Systems | HIGH VOLTAGE DCDC CONVERTER (Alt: MP2462GJ-Z) RoHS : Compliant | 0 | |||
| MP2410BGJ-Z | Monolithic Power Systems | (Alt: MP2410BGJ-Z) RoHS : Compliant | 0 | |||
MP24895GJ-Z![]() | Monolithic Power Systems | LED DRVR Buck 1CH AnalogPWM 1A 5Pin TSOT23 TR (Alt: MP24895GJ-Z) RoHS : Compliant | 0 | |||
| MP2491CGQB-P | Monolithic Power Systems | (Alt: MP2491CGQB-P) RoHS : Compliant | 0 | |||
| MP2489DJ-LF-P | Monolithic Power Systems | (Alt: MP2489DJ-LF-P) RoHS : Compliant | 0 | |||
MP2481DH-LF-P![]() | Monolithic Power Systems | LED DRVR BuckBoost 1CH AnalogPWM 12A 8Pin MSOP EP TR (Alt: MP2481DH-LF-P) RoHS : Compliant | 0 | |||
| MP24943DS-LF-Z | Monolithic Power Systems | Conv DCDC Single Step Down 45V 55V 8Pin SOIC TR (Alt: MP24943DS-LF-Z) RoHS : Compliant | 0 | |||
| UCLAMP2482PWQ.C | Semtech Corporation | Clamp ESD Protection (Alt: UCLAMP2482PWQ.C) RoHS : Compliant | 0 | |||
| RCLAMP2431T.TCT | Semtech Corporation | Diode TVS Single BiDirectional 24V 100W 2Pin SLP TR (Alt: RCLAMP2431T.TCT) RoHS : Compliant | 0 | |||
| ECLAMP2458P.TCT | Semtech Corporation | EMI Filter 5VDC Solder SMD TR (Alt: ECLAMP2458P.TCT) RoHS : Compliant | 0 | |||
| UCLAMP2411ZATFT | Semtech Corporation | (Alt: UCLAMP2411ZATFT) RoHS : Compliant | 0 | |||
| UCLAMP2482SQTCT | Semtech Corporation | (Alt: UCLAMP2482SQTCT) RoHS : Compliant | 0 | |||
![]() Braemac Americas-Symmetry | WDMP.2458.A | Taoglas Antenna Solutions | WDMP.2458.A Wi-Fi Including Wi-Fi 6 Mechanical Patch Antenna |
| 0 | |
![]() Component Electronics, Inc | MP2481DH-LF-Z![]() | Monolithic Power Systems | IN STOCK SHIP TODAY RoHS : Compliant |
| 1,183 | |
| SIMP241D | FECS | IN STOCK SHIP TODAY | 300 | |||
| MP245 | CTS Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 187 | ||
| HLMP-2400-EF000 | Avago Technologies | IN STOCK SHIP TODAY RoHS : Compliant |
| 156 | ||
| HLMP-2450 | Avago Technologies | IN STOCK SHIP TODAY RoHS : Compliant |
| 113 | ||
| HLMP-2400 | IN STOCK SHIP TODAY |
| 23 | |||
| MMP24C-2212P1 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant | 20 | |||
| HLMP-2400 | Agilent Technologies Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 20 | ||
| HLMP-2400 | QT Optoelectronics | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 17 | ||
![]() EBV Elektronik | HLMP-2400-EF000 | Broadcom Limited | (Alt: HLMP-2400-EF000) RoHS : Compliant | 3,840 | ||
| HLMP-2400 | Broadcom Limited | LED Bar Graph Array Yellow 20 mA 21 V 20 mcd 2 LEDs 889mm x 381mm (Alt: HLMP-2400) RoHS : Compliant | 2,880 | |||
| HLMP-2450 | Broadcom Limited | LED Bar Graph Array Yellow 20 mA 21 V 38 mcd 4 LEDs 1905mm x 381mm (Alt: HLMP-2450) RoHS : Compliant | 0 | |||
| SMP24A-M3/84A | Vishay Intertechnologies | 400W24V 5UNIDIRSMP TVS (Alt: SMP24A-M3/84A) RoHS : Compliant | 0 | |||
| HLMP-2450-EF000 | Broadcom Limited | (Alt: HLMP-2450-EF000) RoHS : Compliant | 0 | |||
| TPSMP24AHM3_A/I | Vishay Intertechnologies | (Alt: TPSMP24AHM3_A/I) RoHS : Compliant | 0 | |||
![]() Master Electronics | TTMS-MP-2.4-9 | TE Connectivity | Heat Shrink Tubing ST Cross Linked Polyolefin White RoHS : Compliant |
| 350 | |
| SSRMP-240D16R | TE Connectivity | The SSRMP-240D16R is a panel-mount random turn-on solid-state relay with a DC input capable of switching a 16A load at 240VAC. RoHS : Compliant |
| 247 | ||
| SSRMP-240D10R | TE Connectivity | Solid State Relay - SPST-NO (1 Form A) - 4 to 32VDC Input - 10A 24 to 280V Load - Quick Connect 0.250 (6.3mm) - Mini Puck Package - Panel Mount. RoHS : Compliant |
| 24 | ||
| BACA-AMP-241 | TE Connectivity | WIRE TO BOARD TERMINAL 1.2MM TOP ENTRY MOQ Reduction RoHS : Compliant |
| 0 | ||
| LA12-XLMP-2-45A | TE Connectivity | Ind.Prox.-Switch LA12-XLMP-2-45A RoHS : Compliant |
| 0 | ||
| SSRMP-240D16 | TE Connectivity | SSRMP-240D16 = Mini Puck 16A 240V AC MOQ Reduction RoHS : Compliant |
| 0 | ||
| DDMP-24H7S-J-A197 | ITT Interconnect Solutions | Conn D-Subminiature SKT 7Power/17Signal POS Solder RA Thru-Hole 24 Terminal 1 Port RoHS : Compliant |
| 0 | ||
| DDMP-24X7P-J-K127 | ITT Interconnect Solutions | Combination Layout D Sub Connector D*M DD-24W7 Plug 24 Contacts 17 Signal 7 Power Solder RoHS : Compliant |
| 0 | ||
| SSRMP-240D25 | TE Connectivity | Solid State Relay - SPST-NO (1 Form A) - 4 to 32VDC Input - 25A 24 to 280V Load - Hockey Puck - Quick Connect 0.250 (6.3mm) - Chassis Mount. MOQ Reduction RoHS : Compliant |
| 0 | ||
PMP2490WH![]() | Crydom Inc | Proportional Control SSR - Output Voltage: 90-280VAC - 90A - Supply Voltage: 8-30VDC - Thermal Pad RoHS : Compliant |
| 0 | ||
| DDMP-24W7P-J-K127 | ITT Interconnect Solutions | DDMP-24W7P-J-K127; D Sub; D Sub RoHS : Compliant |
| 0 | ||
| BACA-AMP-243 | TE Connectivity | WIRE TO BOARD HOUSING 1.2MM TOP ENTRY RoHS : Compliant |
| 0 | ||
PMP2490WPH![]() | Crydom Inc | Proportional Control SSR - Output Voltage: 90-280VAC - 90A - Supply Voltage: 8-30VDC - Overvoltage Protection - Thermal Pad RoHS : Compliant |
| 0 | ||
| DDMP-24H7S-J-K126 | ITT Interconnect Solutions | Conn D-Subminiature SKT 7Power/17Signal POS Solder RA Thru-Hole 24 Terminal 1 Port RoHS : Compliant |
| 0 | ||
| LW6MP-24MW | IDEC Corporation | 25MM PILOT LIGHT WHITE RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3MP2445 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 78 Ohm, Connector 2 Series: Blunt Cut, Connector 2 Gender: Genderless, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: M17/176-00002, RF Cable Type: M17/176-00002, RF Cable Impedance: 78 Ohm. TRB 3-Lug Bulkhead Non-Insulated Jack with Blunt Cut for 78 Ohm M17/176-00002 Cable., Radio frequency assembly TRB 3-Lug bulkhead non-insulated jack with blunt cut for 78 Ohm M17/176-00002 cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TRB 3-Lug bulkhead non-insulated jack with blunt cut for 78 Ohm M17/176-00002 cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to blunt cut cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB bulkhead cable connection on one end and blunt cut cable connection on the other. Our 1553 TRB to blunt cut cable assemblies have a jack gender on end 1 and genderless on end 2. PE3MP2445 can also be known as a 1553 TRB female to blunt cut genderless cable assembly and will be shipped same-day as it is purchased. TRB female to blunt cut genderless cable assembly PE3MP2445 is built with M17/176-00002 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to blunt cut cable connectors, has a 78 Ohm impedance. RF specs on this 10 MHz maximum frequency TRB jack bulkhead to blunt cut genderless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MP2445 can also be used in the other direction and will be blunt cut genderless to TRB jack bulkhead cable assembly if the opposite connectivity is required. 1553 TRB female bulkhead to blunt cut genderless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to blunt cut cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TRB 3-Lug bulkhead non-insulated jack with blunt cut for 78 Ohm M17/176-00002 cable. | 210 | ||
| PE3MP2411 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: M17/176-00002, RF Cable Type: M17/176-00002, RF Cable Impedance: 78 Ohm. TRB Bend Relief 3-Slot Solder/Clamp Plug to TRB Bend Relief 3-Lug Solder/Clamp Non-Isolated Bulkhead Jack M17-176-00002 Cable., Radio frequency assembly TRB bend relief 3-Slot solder/clamp plug to TRB bend relief 3-Lug solder/clamp non-isolated bulkhead jack M17-176-00002 cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TRB bend relief 3-Slot solder/clamp plug to TRB bend relief 3-Lug solder/clamp non-isolated bulkhead jack M17-176-00002 cable, TRB cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB bulkhead cable connection on the other. Our 1553 TRB to TRB cable assemblies have a plug gender on end 1 and jack on end 2. PE3MP2411 can also be known as a 1553 TRB male to TRB female cable assembly and will be shipped same-day as it is purchased. TRB male to TRB female cable assembly PE3MP2411 is built with M17/176-00002 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 10 MHz maximum frequency TRB plug to TRB jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MP2411 can also be used in the other direction and will be TRB jack bulkhead to TRB plug cable assembly if the opposite connectivity is required. 1553 TRB male to TRB female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TRB bend relief 3-Slot solder/clamp plug to TRB bend relief 3-Lug solder/clamp non-isolated bulkhead jack M17-176-00002 cable. | 150 | |||
| PE3MP2411-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: M17/176-00002, RF Cable Type: M17/176-00002, RF Cable Impedance: 78 Ohm, Length, Max: 12 inches. TRB Bend Relief 3-Slot Solder/Clamp Plug to TRB Bend Relief 3-Lug Solder/Clamp Non-Isolated Bulkhead Jack M17-176-00002 12" Cable., Radio frequency assembly TRB bend relief 3-Slot solder/clamp plug to TRB bend relief 3-Lug solder/clamp non-isolated bulkhead jack M17-176-00002 12" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TRB bend relief 3-Slot solder/clamp plug to TRB bend relief 3-Lug solder/clamp non-isolated bulkhead jack M17-176-00002 12" cable, TRB cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB bulkhead cable connection on the other. Our 1553 TRB to TRB cable assemblies have a plug gender on end 1 and jack on end 2. PE3MP2411-12 can also be known as a 1553 TRB male to TRB female cable assembly and will be shipped same-day as it is purchased. TRB male to TRB female cable assembly PE3MP2411-12 is built with M17/176-00002 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 10 MHz maximum frequency TRB plug to TRB jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MP2411-12 can also be used in the other direction and will be TRB jack bulkhead to TRB plug cable assembly if the opposite connectivity is required. 1553 TRB male to TRB female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TRB bend relief 3-Slot solder/clamp plug to TRB bend relief 3-Lug solder/clamp non-isolated bulkhead jack M17-176-00002 12" cable. |
| 42 | ||
| PE3MP2445-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 78 Ohm, Connector 2 Series: Blunt Cut, Connector 2 Gender: Genderless, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: M17/176-00002, RF Cable Type: M17/176-00002, RF Cable Impedance: 78 Ohm, Length, Max: 24 inches. TRB 3-Lug Bulkhead Non-Insulated Jack with Blunt Cut for 78 Ohm M17/176-00002, 24" Cable., Radio frequency assembly TRB 3-Lug bulkhead non-insulated jack with blunt cut for 78 Ohm M17/176-00002, 24" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TRB 3-Lug bulkhead non-insulated jack with blunt cut for 78 Ohm M17/176-00002, 24" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to blunt cut cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB bulkhead cable connection on one end and blunt cut cable connection on the other. Our 1553 TRB to blunt cut cable assemblies have a jack gender on end 1 and genderless on end 2. PE3MP2445-24 can also be known as a 1553 TRB female to blunt cut genderless cable assembly and will be shipped same-day as it is purchased. TRB female to blunt cut genderless cable assembly PE3MP2445-24 is built with M17/176-00002 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to blunt cut cable connectors, has a 78 Ohm impedance. RF specs on this 10 MHz maximum frequency TRB jack bulkhead to blunt cut genderless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MP2445-24 can also be used in the other direction and will be blunt cut genderless to TRB jack bulkhead cable assembly if the opposite connectivity is required. 1553 TRB female bulkhead to blunt cut genderless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to blunt cut cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TRB 3-Lug bulkhead non-insulated jack with blunt cut for 78 Ohm M17/176-00002, 24" cable. |
| 42 | ||
| PE3MP2445-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 78 Ohm, Connector 2 Series: Blunt Cut, Connector 2 Gender: Genderless, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: M17/176-00002, RF Cable Type: M17/176-00002, RF Cable Impedance: 78 Ohm, Length, Max: 48 inches. TRB 3-Lug Bulkhead Non-Insulated Jack with Blunt Cut for 78 Ohm M17/176-00002, 48" Cable., Radio frequency assembly TRB 3-Lug bulkhead non-insulated jack with blunt cut for 78 Ohm M17/176-00002, 48" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TRB 3-Lug bulkhead non-insulated jack with blunt cut for 78 Ohm M17/176-00002, 48" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to blunt cut cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB bulkhead cable connection on one end and blunt cut cable connection on the other. Our 1553 TRB to blunt cut cable assemblies have a jack gender on end 1 and genderless on end 2. PE3MP2445-48 can also be known as a 1553 TRB female to blunt cut genderless cable assembly and will be shipped same-day as it is purchased. TRB female to blunt cut genderless cable assembly PE3MP2445-48 is built with M17/176-00002 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to blunt cut cable connectors, has a 78 Ohm impedance. RF specs on this 10 MHz maximum frequency TRB jack bulkhead to blunt cut genderless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MP2445-48 can also be used in the other direction and will be blunt cut genderless to TRB jack bulkhead cable assembly if the opposite connectivity is required. 1553 TRB female bulkhead to blunt cut genderless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to blunt cut cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TRB 3-Lug bulkhead non-insulated jack with blunt cut for 78 Ohm M17/176-00002, 48" cable. |
| 42 | ||
| PE3MP2445-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 78 Ohm, Connector 2 Series: Blunt Cut, Connector 2 Gender: Genderless, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: M17/176-00002, RF Cable Type: M17/176-00002, RF Cable Impedance: 78 Ohm, Length, Max: 12 inches. TRB 3-Lug Bulkhead Non-Insulated Jack with Blunt Cut for 78 Ohm M17/176-00002, 12" Cable., Radio frequency assembly TRB 3-Lug bulkhead non-insulated jack with blunt cut for 78 Ohm M17/176-00002, 12" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TRB 3-Lug bulkhead non-insulated jack with blunt cut for 78 Ohm M17/176-00002, 12" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to blunt cut cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB bulkhead cable connection on one end and blunt cut cable connection on the other. Our 1553 TRB to blunt cut cable assemblies have a jack gender on end 1 and genderless on end 2. PE3MP2445-12 can also be known as a 1553 TRB female to blunt cut genderless cable assembly and will be shipped same-day as it is purchased. TRB female to blunt cut genderless cable assembly PE3MP2445-12 is built with M17/176-00002 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to blunt cut cable connectors, has a 78 Ohm impedance. RF specs on this 10 MHz maximum frequency TRB jack bulkhead to blunt cut genderless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MP2445-12 can also be used in the other direction and will be blunt cut genderless to TRB jack bulkhead cable assembly if the opposite connectivity is required. 1553 TRB female bulkhead to blunt cut genderless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to blunt cut cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TRB 3-Lug bulkhead non-insulated jack with blunt cut for 78 Ohm M17/176-00002, 12" cable. |
| 42 | ||
| PE3MP2445-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 78 Ohm, Connector 2 Series: Blunt Cut, Connector 2 Gender: Genderless, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: M17/176-00002, RF Cable Type: M17/176-00002, RF Cable Impedance: 78 Ohm, Length, Max: 36 inches. TRB 3-Lug Bulkhead Non-Insulated Jack with Blunt Cut for 78 Ohm M17/176-00002, 36" Cable., Radio frequency assembly TRB 3-Lug bulkhead non-insulated jack with blunt cut for 78 Ohm M17/176-00002, 36" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TRB 3-Lug bulkhead non-insulated jack with blunt cut for 78 Ohm M17/176-00002, 36" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to blunt cut cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB bulkhead cable connection on one end and blunt cut cable connection on the other. Our 1553 TRB to blunt cut cable assemblies have a jack gender on end 1 and genderless on end 2. PE3MP2445-36 can also be known as a 1553 TRB female to blunt cut genderless cable assembly and will be shipped same-day as it is purchased. TRB female to blunt cut genderless cable assembly PE3MP2445-36 is built with M17/176-00002 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to blunt cut cable connectors, has a 78 Ohm impedance. RF specs on this 10 MHz maximum frequency TRB jack bulkhead to blunt cut genderless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MP2445-36 can also be used in the other direction and will be blunt cut genderless to TRB jack bulkhead cable assembly if the opposite connectivity is required. 1553 TRB female bulkhead to blunt cut genderless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to blunt cut cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TRB 3-Lug bulkhead non-insulated jack with blunt cut for 78 Ohm M17/176-00002, 36" cable. |
| 42 | ||
| PE3MP2411-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: M17/176-00002, RF Cable Type: M17/176-00002, RF Cable Impedance: 78 Ohm, Length, Max: 36 inches. TRB Bend Relief 3-Slot Solder/Clamp Plug to TRB Bend Relief 3-Lug Solder/Clamp Non-Isolated Bulkhead Jack M17-176-00002 36" Cable., Radio frequency assembly TRB bend relief 3-Slot solder/clamp plug to TRB bend relief 3-Lug solder/clamp non-isolated bulkhead jack M17-176-00002 36" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TRB bend relief 3-Slot solder/clamp plug to TRB bend relief 3-Lug solder/clamp non-isolated bulkhead jack M17-176-00002 36" cable, TRB cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB bulkhead cable connection on the other. Our 1553 TRB to TRB cable assemblies have a plug gender on end 1 and jack on end 2. PE3MP2411-36 can also be known as a 1553 TRB male to TRB female cable assembly and will be shipped same-day as it is purchased. TRB male to TRB female cable assembly PE3MP2411-36 is built with M17/176-00002 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 10 MHz maximum frequency TRB plug to TRB jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MP2411-36 can also be used in the other direction and will be TRB jack bulkhead to TRB plug cable assembly if the opposite connectivity is required. 1553 TRB male to TRB female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TRB bend relief 3-Slot solder/clamp plug to TRB bend relief 3-Lug solder/clamp non-isolated bulkhead jack M17-176-00002 36" cable. |
| 28 | ||
| PE3MP2411-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: M17/176-00002, RF Cable Type: M17/176-00002, RF Cable Impedance: 78 Ohm, Length, Max: 48 inches. TRB Bend Relief 3-Slot Solder/Clamp Plug to TRB Bend Relief 3-Lug Solder/Clamp Non-Isolated Bulkhead Jack M17-176-00002 48" Cable., Radio frequency assembly TRB bend relief 3-Slot solder/clamp plug to TRB bend relief 3-Lug solder/clamp non-isolated bulkhead jack M17-176-00002 48" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TRB bend relief 3-Slot solder/clamp plug to TRB bend relief 3-Lug solder/clamp non-isolated bulkhead jack M17-176-00002 48" cable, TRB cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB bulkhead cable connection on the other. Our 1553 TRB to TRB cable assemblies have a plug gender on end 1 and jack on end 2. PE3MP2411-48 can also be known as a 1553 TRB male to TRB female cable assembly and will be shipped same-day as it is purchased. TRB male to TRB female cable assembly PE3MP2411-48 is built with M17/176-00002 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 10 MHz maximum frequency TRB plug to TRB jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MP2411-48 can also be used in the other direction and will be TRB jack bulkhead to TRB plug cable assembly if the opposite connectivity is required. 1553 TRB male to TRB female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TRB bend relief 3-Slot solder/clamp plug to TRB bend relief 3-Lug solder/clamp non-isolated bulkhead jack M17-176-00002 48" cable. |
| 21 | ||
| PE3MP2456 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRS SUBMINIATURE, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: Blunt Cut, Connector 2 Gender: Genderless, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02003, RF Cable Type: 30-02003, RF Cable Impedance: 78 Ohm. TRS Subminiature Plug with Blunt Cut for 78 Ohm PE-30-02003 Cable., Radio frequency assembly TRS subminiature plug with blunt cut for 78 Ohm PE-30-02003 cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TRS subminiature plug with blunt cut for 78 Ohm PE-30-02003 cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRS SUBMINIATURE to blunt cut cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRS SUBMINIATURE cable connection on one end and blunt cut cable connection on the other. Our 1553 TRS SUBMINIATURE to blunt cut cable assemblies have a plug gender on end 1 and genderless on end 2. PE3MP2456 can also be known as a 1553 TRS SUBMINIATURE male to blunt cut genderless cable assembly and will be shipped same-day as it is purchased. TRS SUBMINIATURE male to blunt cut genderless cable assembly PE3MP2456 is built with 30-02003 which is a flexible twinax type. The Pasternack flexible TRS SUBMINIATURE cable assembly is manufactured with TRS SUBMINIATURE to blunt cut cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRS SUBMINIATURE plug to blunt cut genderless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MP2456 can also be used in the other direction and will be blunt cut genderless to TRS SUBMINIATURE plug cable assembly if the opposite connectivity is required. 1553 TRS SUBMINIATURE male to blunt cut genderless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRS SUBMINIATURE to blunt cut cable assembly for quick shipment worldwide. Variations of TRS SUBMINIATURE cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TRS subminiature plug with blunt cut for 78 Ohm PE-30-02003 cable. | 20 | |||
| PE3MP2442-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: Blunt Cut, Connector 2 Gender: Genderless, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02003, RF Cable Type: 30-02003, RF Cable Impedance: 78 Ohm, Length, Max: 24 inches. TRB 3-Lug Jack with Blunt Cut for 78 Ohm PE-30-02003, 24" Cable., Radio frequency assembly TRB 3-Lug jack with blunt cut for 78 Ohm PE-30-02003, 24" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TRB 3-Lug jack with blunt cut for 78 Ohm PE-30-02003, 24" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to blunt cut cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and blunt cut cable connection on the other. Our 1553 TRB to blunt cut cable assemblies have a jack gender on end 1 and genderless on end 2. PE3MP2442-24 can also be known as a 1553 TRB female to blunt cut genderless cable assembly and will be shipped same-day as it is purchased. TRB female to blunt cut genderless cable assembly PE3MP2442-24 is built with 30-02003 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to blunt cut cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRB jack to blunt cut genderless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MP2442-24 can also be used in the other direction and will be blunt cut genderless to TRB jack cable assembly if the opposite connectivity is required. 1553 TRB female to blunt cut genderless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to blunt cut cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TRB 3-Lug jack with blunt cut for 78 Ohm PE-30-02003, 24" cable. |
| 5 | ||
| PE3MP2442-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: Blunt Cut, Connector 2 Gender: Genderless, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02003, RF Cable Type: 30-02003, RF Cable Impedance: 78 Ohm, Length, Max: 36 inches. TRB 3-Lug Jack with Blunt Cut for 78 Ohm PE-30-02003, 36" Cable., Radio frequency assembly TRB 3-Lug jack with blunt cut for 78 Ohm PE-30-02003, 36" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TRB 3-Lug jack with blunt cut for 78 Ohm PE-30-02003, 36" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to blunt cut cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and blunt cut cable connection on the other. Our 1553 TRB to blunt cut cable assemblies have a jack gender on end 1 and genderless on end 2. PE3MP2442-36 can also be known as a 1553 TRB female to blunt cut genderless cable assembly and will be shipped same-day as it is purchased. TRB female to blunt cut genderless cable assembly PE3MP2442-36 is built with 30-02003 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to blunt cut cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRB jack to blunt cut genderless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MP2442-36 can also be used in the other direction and will be blunt cut genderless to TRB jack cable assembly if the opposite connectivity is required. 1553 TRB female to blunt cut genderless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to blunt cut cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TRB 3-Lug jack with blunt cut for 78 Ohm PE-30-02003, 36" cable. |
| 5 | ||
| PE3MP2442-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: Blunt Cut, Connector 2 Gender: Genderless, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02003, RF Cable Type: 30-02003, RF Cable Impedance: 78 Ohm, Length, Max: 60 inches. TRB 3-Lug Jack with Blunt Cut for 78 Ohm PE-30-02003, 60" Cable., Radio frequency assembly TRB 3-Lug jack with blunt cut for 78 Ohm PE-30-02003, 60" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TRB 3-Lug jack with blunt cut for 78 Ohm PE-30-02003, 60" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to blunt cut cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and blunt cut cable connection on the other. Our 1553 TRB to blunt cut cable assemblies have a jack gender on end 1 and genderless on end 2. PE3MP2442-60 can also be known as a 1553 TRB female to blunt cut genderless cable assembly and will be shipped same-day as it is purchased. TRB female to blunt cut genderless cable assembly PE3MP2442-60 is built with 30-02003 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to blunt cut cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRB jack to blunt cut genderless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MP2442-60 can also be used in the other direction and will be blunt cut genderless to TRB jack cable assembly if the opposite connectivity is required. 1553 TRB female to blunt cut genderless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to blunt cut cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TRB 3-Lug jack with blunt cut for 78 Ohm PE-30-02003, 60" cable. |
| 5 | ||
| PE3MP2456-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRS SUBMINIATURE, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: Blunt Cut, Connector 2 Gender: Genderless, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02003, RF Cable Type: 30-02003, RF Cable Impedance: 78 Ohm, Length, Max: 48 inches. TRS Subminiature Plug with Blunt Cut for 78 Ohm PE-30-02003, 48" Cable., Radio frequency assembly TRS subminiature plug with blunt cut for 78 Ohm PE-30-02003, 48" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TRS subminiature plug with blunt cut for 78 Ohm PE-30-02003, 48" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRS SUBMINIATURE to blunt cut cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRS SUBMINIATURE cable connection on one end and blunt cut cable connection on the other. Our 1553 TRS SUBMINIATURE to blunt cut cable assemblies have a plug gender on end 1 and genderless on end 2. PE3MP2456-48 can also be known as a 1553 TRS SUBMINIATURE male to blunt cut genderless cable assembly and will be shipped same-day as it is purchased. TRS SUBMINIATURE male to blunt cut genderless cable assembly PE3MP2456-48 is built with 30-02003 which is a flexible twinax type. The Pasternack flexible TRS SUBMINIATURE cable assembly is manufactured with TRS SUBMINIATURE to blunt cut cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRS SUBMINIATURE plug to blunt cut genderless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MP2456-48 can also be used in the other direction and will be blunt cut genderless to TRS SUBMINIATURE plug cable assembly if the opposite connectivity is required. 1553 TRS SUBMINIATURE male to blunt cut genderless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRS SUBMINIATURE to blunt cut cable assembly for quick shipment worldwide. Variations of TRS SUBMINIATURE cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TRS subminiature plug with blunt cut for 78 Ohm PE-30-02003, 48" cable. |
| 4 | ||
| PE3MP2414-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02001, RF Cable Type: 30-02001, RF Cable Impedance: 78 Ohm, Length, Max: 60 inches. 78 Ohm TRB Bend Relief 3-Slot Solder/Clamp Plug to Bend Relief 3-Lug Solder/Clamp Insulated Bulkhead Jack for PE-30-02001 Twinax 60" Cable., Radio frequency assembly 78 Ohm TRB bend relief 3-Slot solder/clamp plug to bend relief 3-Lug solder/clamp insulated bulkhead jack for PE-30-02001 twinax 60" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 78 Ohm TRB bend relief 3-Slot solder/clamp plug to bend relief 3-Lug solder/clamp insulated bulkhead jack for PE-30-02001 twinax 60" cable, TRB cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB bulkhead cable connection on the other. Our 1553 TRB to TRB cable assemblies have a plug gender on end 1 and jack on end 2. PE3MP2414-60 can also be known as a 1553 TRB male to TRB female cable assembly and will be shipped same-day as it is purchased. TRB male to TRB female cable assembly PE3MP2414-60 is built with 30-02001 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 400 MHz maximum frequency TRB plug to TRB jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MP2414-60 can also be used in the other direction and will be TRB jack bulkhead to TRB plug cable assembly if the opposite connectivity is required. 1553 TRB male to TRB female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 78 Ohm TRB bend relief 3-Slot solder/clamp plug to bend relief 3-Lug solder/clamp insulated bulkhead jack for PE-30-02001 twinax 60" cable. |
| 1 | ||
![]() Vyrian | MP24895GJ-Z![]() | Monolithic Power Systems | LED Driver, 2-Segment, PDSO5 RoHS : Compliant | 16,466 | ||
| MP24893DJ-LF-Z | Monolithic Power Systems | LED Driver, 2-Segment, PDSO5 RoHS : Compliant | 16,278 | |||
MP2403DN-LF![]() | Monolithic Power Systems | Switching Regulator, Current-mode, 5.3A, 305kHz Switching Freq-Max, PDSO8 RoHS : Compliant | 10,726 | |||
| MP24833-AGN | Monolithic Power Systems | LED Driver, 2-Segment, PDSO8 RoHS : Compliant | 8,502 | |||
| HLMP-2400 | Broadcom Limited | RoHS : Compliant | 7,949 | |||
| MP24833-AGN-Z | Monolithic Power Systems | LED Driver, 2-Segment, PDSO8 RoHS : Compliant | 7,924 | |||
| PMP2493.3 | Texas Instruments | 7,652 | ||||
| HLMP-2450 | Broadcom Limited | RoHS : Compliant | 7,286 | |||
| PMP2493.2 | Texas Instruments | 7,017 | ||||
| BCM5805KQM-P24 | Broadcom Limited | 5,150 | ||||
| HLMP2450CATE | Broadcom Limited | 4,414 | ||||
| PMP2431 | Texas Instruments | 4,023 | ||||
| PMP2493.4 | Texas Instruments | 3,440 | ||||
| HLMP-2450-EF000 | Broadcom Limited | RoHS : Compliant | 3,316 | |||
| MP2456GJ-Z-CUT | Monolithic Power Systems | Switching Regulator RoHS : Compliant | 810 | |||
![]() Win Source Electronics | RCLAMP2451ZATFT | Semtech Corporation | TVS DIODE 24VWM 7VC SLP0603P2X3F RoHS : Compliant |
| 211,490 | |
MP2481DH-LF![]() | Monolithic Power Systems | IC LED DRVR RGLTR PWM 1.2A 8MSOP RoHS : Compliant |
| 90,000 | ||
| MP2410AGJ-Z | Monolithic Power Systems | IC LED DRV RGLTR PWM 2A TSOT23-6 RoHS : Compliant |
| 40,920 | ||
| MP24833-AGN | Monolithic Power Systems | IC LED DRIVER RGLTR PWM 3A 8SOIC RoHS : Compliant |
| 35,090 | ||
MP2467DN-LF![]() | Monolithic Power Systems | IC REG BUCK ADJ 2.5A 8SOICE RoHS : Compliant |
| 35,000 | ||
| MP24833-AGN-Z | Monolithic Power Systems | IC LED DRIVER RGLTR PWM 3A 8SOIC RoHS : Compliant |
| 28,458 | ||
| MP2499AGQB-Z | Monolithic Power Systems | IC REG BUCK ADJ 3A 13QFN RoHS : Compliant |
| 25,000 | ||
| MP24943DN-LF-Z | Monolithic Power Systems | IC REG BUCK ADJ 3A 8SOICE RoHS : Compliant |
| 22,710 | ||
MP2452DD-LF-Z![]() | Monolithic Power Systems | IC REG BUCK ADJ 1A / Conv DC-DC 3.3V to 36V Step Down Single-Out 0.794V to 33V 1A Automotive 8-Pin QFN EP T/R RoHS : Compliant |
| 19,995 | ||
| MP2457GJ-Z | Monolithic Power Systems | 36V, 0.6A, 2MHZ, SYNCHRONOUS,STE RoHS : Compliant |
| 12,000 | ||
| MP2480DN-LF-Z | Monolithic Power Systems | IC LED DRIVER RGLTR PWM 3A 8SOIC RoHS : Compliant |
| 10,642 | ||
MP2482DN-LF-Z![]() | Monolithic Power Systems | IC REG BUCK ADJ 5A 8SOICE RoHS : Compliant |
| 10,493 | ||
| ECLAMP2465T.TCT | Semtech Corporation | FILTER RC(PI) ESD SMD RoHS : Compliant |
| 6,000 | ||
| MP2499MGQB-Z | Monolithic Power Systems | IC REG BUCK ADJ 3A 13QFN RoHS : Compliant |
| 5,000 | ||
| MP24893DJ-LF-Z | Monolithic Power Systems | IC LED DRV RGLTR PWM 1A TSOT23-5 RoHS : Compliant |
| 3,540 |
| Lei ha avuto il aiuto da alldatasheet? [ DONATE ] |
Di alldatasheet | Richest di pubblicita | contatti | Privacy Policy | Collegamento alla scheda tecnica | scambio Link | Ricerca produttore All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |