PE-2Z-R Price, Reseller, Stock

Key Specifications, Connector Series In: N, Connector Gender In: Female, Minimum Frequency: 4 GHz, Maximum Frequency: 8 GHz, Number of Output Ports: 2 Port, Impedance: 50 Ohm, Maximum Input Power: 30 Watt. 2 Way N Wilkinson Power Divider From 4 GHz to 8 GHz Rated at 30 Watts. PE2035 2 way type N power divider (also known as a type N coaxial power splitter) is rated for a minimum frequency of 4 GHz and a maximum frequency of 8 GHz. This Pasternack 2 port type N power divider / coaxial splitter has a 50 Ohm impedance and a maxium input power of 30 Watts. Our N type coaxial RF splitter / divider has a female type N input and 2 female type N output ports. This 2 way N type RF power divider from Pasternack is a wilkinson design and has a maximum insertion loss of 0. The maximum input VSWR of this type N wilkinson splitter / divider is 1.3:1 and the minimum isolation is 20 dB. Our 2 port type N power divider is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This wilkinson 2 way N type female coaxial RF power divider splitter can be bought and shipped worldwide the same-day as with Pasternack's other in-stock RF parts.

1 : $1,020.0
5 : $979.2
10 : $938.4

PE20DV1141

Pasternack Enterprises

Key Specifications, Connector Series In: N, Connector Gender In: Female, Minimum Frequency: 700 MHz, Maximum Frequency: 2.7 GHz, Number of Output Ports: 4 Port, Impedance: 50 Ohm, Maximum Input Power: 30 Watt. 4 Way N Power Divider From 0.7 GHz to 2.7 GHz Rated at 30 Watts., The PE20DV1141 4-way waveguide power divider (also known as a coaxial power splitter) is rated for a minimum frequency of 700 MHz and a maximum frequency of 2.7 GHz. This Pasternack 4 port power divider/coaxial splitter has a 50 Ohm impedance and a maximum input power of 30 kW. Our coaxial RF splitter/divider has a female input and 4 female output ports. This RF power divider allows the splitting of a single signal into multiple signals with equal magnitude and phase. Our 4-way waveguide power divider has 500 kW of peak input power. Pasternack’s PE20DV1141 coax connectorized power splitter has an aluminum housing and can handle maximum reverse power up to 3 Watts. This threaded connector waveguide power divider has a 0.4 dB maximum amplitude balance. Our 50 Ohm radio frequency power divider is built to operate across a temperature range of -40 deg C to 85 deg C. This 2.7 GHz waveguide power divider has 2 degrees and 3 degrees typical and maximum phase balance, respectively. Additional power divider specifications and dimensions can be found on its PDF specification datasheet and CAD drawings above. This 4-way RF power divider from Pasternack has a maximum insertion loss of 0.6 dB. The maximum input VSWR of this splitter/divider is 1.35:1 and the minimum isolation is 20 dB. The PE20DV1141 waveguide power divider from Pasternack is ideal for test and measurement, military communications, commercial communications, wireless communications and satcom applications. Our 4 port waveguide power divider is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This 4-way coaxial RF power divider splitter can be bought and shipped worldwide the same-day as with Pasternack's other in-stock RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the perfect waveguide power divider for your requirements.

1 : $605.0
10 : $592.9
25 : $580.8
100 : $568.7

PE2CP1113

Pasternack Enterprises

Key Specifications, Directionality: Dual Directional, Connector Series: SMA, Connector Gender: Female, Minimum Frequency: 2 GHz, Maximum Frequency: 8 GHz, Maximum Input Power: 50 Watt, Coupling Value: 20 dB. Dual Directional 20 dB SMA Coupler From 2 GHz to 8 GHz Rated to 50 Watts. RF coupler part number PE2CP1113 from Pasternack is one of over 40,000 RF components available for same day shipping worldwide. This RF coupler is dual directional and is manufactured with SMA ports. Our dual directional coupler design uses SMA ports that are female gender and 50 Ohm impedance. The Pasternack dual directional coupler design is rated for a minimum frequency of 2 GHz and a maximum frequency of 8 GHz. Dual directional coupler part # PE2CP1113 is constructed with a coupling value of 20 dB and a coupler directivity of 20 dB. This female SMA dual directional coupler is built with a maximum insertion loss of 0.5 dB and a maximum input power of 50 watts. Our dual directional coupler design with SMA connector is rated for a maximum insertion loss of 0.5 dB and a maximum VSWR of 1.2. Additional female SMA coupler specs for this RF component can be found on its radio frequency dual directional coupler PDF specifications datasheet above. PE2CP1113 dual directional 20 dB SMA coupler is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack and it can be bought and then shipped worldwide the same-day as with Pasternack's other in-stock RF parts.

1 : $1,110.0
5 : $1,065.6
10 : $1,021.2

PE20DV001

Pasternack Enterprises

Key Specifications, Connector Series In: SMA, Connector Gender In: Female, Minimum Frequency: 2 GHz, Maximum Frequency: 8 GHz, Number of Output Ports: 3 Port, Impedance: 50 Ohm, Maximum Input Power: 30 Watt. 3 Way SMA Power Divider from 2 GHz to 8 GHz Rated at 30 Watts. PE20DV001 3 way SMA power divider (also known as a SMA coaxial power splitter) is rated for a minimum frequency of 2 GHz and a maximum frequency of 8 GHz. This Pasternack 3 port SMA power divider / coaxial splitter has a 50 Ohm impedance and a maxium input power of 30 Watts. Our SMA coaxial RF splitter / divider has a female SMA input and 3 female SMA output ports. This 3 way SMA RF power divider from Pasternack is a reactive design and has a maximum insertion loss of 0. The maximum input VSWR of this SMA reactive splitter / divider is 1.4:1 and the minimum isolation is 18 dB. Our 3 port SMA power divider is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This reactive 3 way SMA female coaxial RF power divider splitter can be bought and shipped worldwide the same-day as with Pasternack's other in-stock RF parts.

1 : $565.0
10 : $542.4
25 : $519.8

PE20S0031

Pasternack Enterprises

Key Specifications, Connector Series In: SMA, Connector Gender In: Female, Connector Series Out: N, Connector Gender Out: Female, Minimum Frequency: 700 MHz, Maximum Frequency: 6 GHz, Ports: 4, Impedance: 50 Ohms, Maximum Input Power: 300 Watts. 4 Way Broadband Combiner from 700 MHz to 6 GHz SMA Female Input and N-Type Female Output rated 300 Watts. Pasternack’s PE20S0031 is a passive 4-way broadband RF combiner that operates at a minimum frequency of 700 MHz and a maximum frequency of 6 GHz. Our high-power Coaxial Connectorized combiner has a maximum input-output VSWR of 1.35:1 along with a maximum power handling capacity of 300 Watts. This 4-way RF power combiner is stocked to be readily available for same business day shipment. Our Coaxial combiner has an SMA Female input and N Female output connectors. This PE20S0031 4-way RF power combiner from Pasternack is suitable for Communications Systems, Power Combining, PCS, GSM, LTE, Cellular, Amplifier Systems, Amplifier Power Combining, Wireless Infrastructures and Defense Applications applications. Our Reactive broadband RF combiner has a length of 5.2 inches, a width of 3.9 inches, and a weight of 1.76 lbs. Additional radio frequency combiner specs and dimensions for this component can be found on its PDF specification datasheet and CAD drawings. The high-power 4-way broadband RF combiner has a minimum isolation of 6.5 dB and a maximum insertion loss of 1.1 dB. Our Female Coaxial radio frequency combiner has a typical phase balance of 7 degrees and a typical amplitude balance of 0.4 dB. This PE20S0031 broadband radio frequency power combiner from Pasternack has an impedance of 50 Ohms. Our Coaxial Connectorized combiner can operate at temperatures ranging from -55° to 85° degrees C. This Pasternack 4-way RF combiner will ship the same business day as purchased. Our high-power Coaxial combiner is part of over one million RF, microwave, and millimeter wave components in stock for local, domestic, and international shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF power combiner as per your requirements.

1 : $3,300.0
5 : $3,234.0
10 : $3,168.0
25 : $3,102.0

PE2CP1073A

Pasternack Enterprises

Key Specifications, Directionality: Directional, Connector Series: N, Connector Gender: Female, Minimum Frequency: 380 MHz, Maximum Frequency: 4 GHz, Maximum Input Power: 200 Watt, Coupling Value: 30 dB. Low PIM Directional 30 dB N Coupler To 4 GHz Rated to 200 Watts. RF coupler part number PE2CP1073A from Pasternack is one of over 40,000 RF components available for same day shipping worldwide. This RF coupler is directional and is manufactured with type N ports. Our directional coupler design uses type N ports that are female gender and 50 Ohm impedance. The Pasternack directional coupler design is rated for a minimum frequency of 380 MHz and a maximum frequency of 4 GHz. Directional coupler part # PE2CP1073A is constructed with a coupling value of 30 dB and a coupler directivity of 17 dB. This female type N directional coupler is built with a maximum insertion loss of 0.25 dB and a maximum input power of 200 watts. Our directional coupler design with type N connector is rated for a maximum insertion loss of 0.25 dB and a maximum VSWR of 1.22. Additional female N type coupler specs for this RF component can be found on its radio frequency directional coupler PDF specifications datasheet above. PE2CP1073A directional 30 dB type N coupler is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack and it can be bought and then shipped worldwide the same-day as with Pasternack's other in-stock RF parts.

1 : $820.0
5 : $787.2
10 : $754.4
25 : $721.6

PE2CP1122-30

Pasternack Enterprises

Key Specifications, Directionality: Directional, Connector Series: 2.92mm, Connector Gender: Female, Minimum Frequency: 1 GHz, Maximum Frequency: 40 GHz, Maximum Input Power: 30 Watt, Coupling Value: 30 dB. Directional 30 dB 2.92mm Coupler From 1 GHz to 40 GHz Rated to 30 Watts. RF coupler part number PE2CP1122-30 from Pasternack is one of over 40,000 RF components available for same day shipping worldwide. This RF coupler is directional and is manufactured with 2.92mm ports. Our directional coupler design uses 2.92mm ports that are female gender and 50 Ohm impedance. The Pasternack directional coupler design is rated for a minimum frequency of 1 GHz and a maximum frequency of 40 GHz. Directional coupler part # PE2CP1122-30 is constructed with a coupling value of 30 dB and a coupler directivity of 0 dB. This female 2.92mm directional coupler is built with a maximum insertion loss of 2 dB and a maximum input power of 30 watts. Our directional coupler design with 2.92mm connector is rated for a maximum insertion loss of 2 dB and a maximum VSWR of 1.6. Additional female 2.92mm coupler specs for this RF component can be found on its radio frequency directional coupler PDF specifications datasheet above. PE2CP1122-30 directional 30 dB 2.92mm coupler is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack and it can be bought and then shipped worldwide the same-day as with Pasternack's other in-stock RF parts.

1 : $2,510.0
5 : $2,409.6
10 : $2,309.2
25 : $2,208.8

PE2WAN042-10SF

Pasternack Enterprises

Key Specifications, Waveguide Size: WR-42, Gain Min: 10, Beam Width, 3dB V: 51.6, Beam Width, 3dB H: 52.1, Frequency, Min: 18 GHz, Frequency, Max: 26.5 GHz. WR-42 Standard Gain Horn with 10 dBi gain, SMA Female connector, with Pre-Installed L Mount. The PE2WAN042-10SF standard gain horn antenna with a pre-installed L mount (also known as a waveguide horn antenna) is part of our huge selection of waveguide antennas. Pasternack’s standard gain horn antenna is manufactured with a WR-42 input and a waveguide to coaxial transition adapter. Our WR-42 waveguide antenna features an SMA female connector. This antenna is suitable for applications such as antenna measurements, wireless communication, laboratory use, microwave radio systems, radome testing, automotive antenna test solutions, radar cross section and satellite antenna testing. Our WR-42 standard gain horn antenna with an SMA female input has a minimum frequency of 18 GHz and a maximum frequency of 26.5 GHz. Pasternack’s PE2WAN042-10SF waveguide horn antenna has a typical gain of 10 dBi. Our waveguide antenna has a typical vertical beam width of 51.6 degrees and a horizontal beam width of 52.1 degrees at 3 dB. This antenna has a length of 6.36 inches, a width of 5.6 inches, and a weight of 0.69 lbs. This WR-42 waveguide horn antenna with 10 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Additional dimensions and specifications for this antenna are available on our downloadable PDF datasheet. Our standard gain horn antenna with an SMA female interface can ship worldwide the same business day that it is purchased, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements.

1 : $2,360.0
10 : $2,265.6
25 : $2,171.2
100 : $2,076.8

PE2029D

Pasternack Enterprises

1 : $1,630.0
5 : $1,564.8
10 : $1,499.6
25 : $1,434.4

PE20DV1032A

Pasternack Enterprises

Key Specifications, Connector Series In: N, Connector Gender In: Female, Minimum Frequency: 617 MHz, Maximum Frequency: 2.7 GHz, Number of Output Ports: 2 Port, Impedance: 50 Ohm, Maximum Input Power: 30 Watt. 2 Way N Power Divider from 617 MHz to 2.7 GHz Rated at 30 Watts. PE20DV1032A 2 way type N power divider (also known as a type N coaxial power splitter) is rated for a minimum frequency of 617 MHz and a maximum frequency of 2.7 GHz. This Pasternack 2 port type N power divider / coaxial splitter has a 50 Ohm impedance and a maxium input power of 30 Watts. Our N type coaxial RF splitter / divider has a female type N input and 2 female type N output ports. This 2 way type N RF power divider from Pasternack is a wilkinson design and has a maximum insertion loss of 0.3. The maximum input VSWR of this N type wilkinson splitter / divider is 1.3:1 and the minimum isolation is 21 dB. Our 2 port type N power divider is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This wilkinson 2 way N type female coaxial RF power divider splitter can be bought and shipped worldwide the same-day as with Pasternack's other in-stock RF parts.

1 : $499.99
10 : $479.99
25 : $459.99
100 : $439.99

PE20DV1060

Pasternack Enterprises

Key Specifications, Connector Series In: 2.92mm, Connector Gender In: Female, Minimum Frequency: 2 GHz, Maximum Frequency: 40 GHz, Number of Output Ports: 2 Port, Impedance: 50 Ohm, Maximum Input Power: 20 Watt. 2 Way 2.92mm Power Divider from 2 GHz to 40 GHz Rated at 20 Watts. PE20DV1060 2 way 2.92mm power divider (also known as a 2.92mm coaxial power splitter) is rated for a minimum frequency of 2 GHz and a maximum frequency of 40 GHz. This Pasternack 2 port 2.92mm power divider / coaxial splitter has a 50 Ohm impedance and a maxium input power of 20 Watts. Our 2.92mm coaxial RF splitter / divider has a female 2.92mm input and 2 female 2.92mm output ports. This 2 way 2.92mm RF power divider from Pasternack is a wilkinson design and has a maximum insertion loss of 1.5. The maximum input VSWR of this 2.92mm wilkinson splitter / divider is and the minimum isolation is 0 dB. Our 2 port 2.92mm power divider is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack. This wilkinson 2 way 2.92mm female coaxial RF power divider splitter can be bought and shipped worldwide the same-day as with Pasternack's other in-stock RF parts.

1 : $2,210.0
5 : $2,121.6
10 : $2,033.2
25 : $1,944.8

PE2CP1032

Pasternack Enterprises

1 : $86.99
25 : $82.64
50 : $78.29
100 : $74.81

PE2CP1133-10

Pasternack Enterprises

Key Specifications, Directionality: Directional, Connector Series: 2.92mm, Connector Gender: Female, Minimum Frequency: 2 GHz, Maximum Frequency: 40 GHz, Maximum Input Power: 30 Watt, Coupling Value: 10 dB. Directional 10 dB 2.92mm Coupler From 2 GHz to 40 GHz Rated to 30 Watts. RF coupler part number PE2CP1133-10 from Pasternack is one of over 40,000 RF components available for same day shipping worldwide. This RF coupler is directional and is manufactured with 2.92mm ports. Our directional coupler design uses 2.92mm ports that are female gender and 50 Ohm impedance. The Pasternack directional coupler design is rated for a minimum frequency of 2 GHz and a maximum frequency of 40 GHz. Directional coupler part # PE2CP1133-10 is constructed with a coupling value of 10 dB and a coupler directivity of 10 dB. This female 2.92mm directional coupler is built with a maximum insertion loss of 2.2 dB and a maximum input power of 30 watts. Our directional coupler design with 2.92mm connector is rated for a maximum insertion loss of 2.2 dB and a maximum VSWR of 1.6. Additional female 2.92mm coupler specs for this RF component can be found on its radio frequency directional coupler PDF specifications datasheet above. PE2CP1133-10 directional 10 dB 2.92mm coupler is one of over 40,000 RF, microwave and millimeter wave components supplied by Pasternack and it can be bought and then shipped worldwide the same-day as with Pasternack's other in-stock RF parts.

1 : $1,970.0
5 : $1,891.2
10 : $1,812.4
25 : $1,733.6

PE2WAN042-20KM

Pasternack Enterprises

Key Specifications, Waveguide Size: WR-42, Gain Min: 20, Beam Width, 3dB V: 17.3, Beam Width, 3dB H: 17.5, Frequency, Min: 18 GHz, Frequency, Max: 26.5 GHz. WR-42 Standard Gain Horn with 20 dBi gain, 2.92mm Male connector, with Pre-Installed L Mount. The PE2WAN042-20KM standard gain horn antenna with a pre-installed L mount (also known as a waveguide horn antenna) is part of our huge selection of waveguide antennas. Pasternack’s standard gain horn antenna is manufactured with a WR-42 input and a waveguide to coaxial transition adapter. Our WR-42 waveguide antenna features a 2.92mm male connector. This antenna is suitable for applications such as antenna measurements, wireless communication, laboratory use, microwave radio systems, radome testing, automotive antenna test solutions, radar cross section and satellite antenna testing. Our WR-42 standard gain horn antenna with a 2.92mm male input has a minimum frequency of 18 GHz and a maximum frequency of 26.5 GHz. Pasternack’s PE2WAN042-20KM waveguide horn antenna has a typical gain of 20 dBi. Our waveguide antenna has a typical vertical beam width of 17.3 degrees and a horizontal beam width of 17.5 degrees at 3 dB. This antenna has a length of 10.53 inches, a width of 6.77 inches, and a weight of 0.76 lbs. This WR-42 waveguide horn antenna with 20 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Additional dimensions and specifications for this antenna are available on our downloadable PDF datasheet. Our standard gain horn antenna with a 2.92mm male interface can ship worldwide the same business day that it is purchased, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements.

1 : $2,210.0
10 : $2,121.6
25 : $2,033.2
100 : $1,944.8

PE2WAN137-20SF

Pasternack Enterprises

Key Specifications, Waveguide Size: WR-137, Gain Min: 20, Beam Width, 3dB V: 17.3, Beam Width, 3dB H: 17.5, Frequency, Min: 5.85 GHz, Frequency, Max: 8.2 GHz. WR-137 Standard Gain Horn with 20 dBi gain, SMA Female Connector, with Pre-Installed L Mount. The PE2WAN137-20SF standard gain horn antenna with a pre-installed L mount (also known as a waveguide horn antenna) is part of our huge selection of waveguide antennas. Pasternack’s standard gain horn antenna is manufactured with a WR-137 input and a waveguide to coaxial transition adapter. Our WR-137 waveguide antenna features an SMA female connector. This antenna is suitable for applications such as antenna measurements, wireless communication, laboratory use, microwave radio systems, radome testing, automotive antenna test solutions, radar cross section and satellite antenna testing. Our WR-137 standard gain horn antenna with an SMA female input has a minimum frequency of 5.85 GHz and a maximum frequency of 8.2 GHz. Pasternack’s PE2WAN137-20SF waveguide horn antenna has a typical gain of 20 dBi. Our waveguide antenna has a typical vertical beam width of 17.3 degrees and a horizontal beam width of 17.5 degrees at 3 dB. This antenna has a length of 10.71 inches, a width of 4.69 inches, and a weight of 1.64 lbs. This WR-137 waveguide horn antenna with 20 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Additional dimensions and specifications for this antenna are available on our downloadable PDF datasheet. Our standard gain horn antenna with an SMA female interface can ship worldwide the same business day that it is purchased, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements.

1 : $3,600.0
10 : $3,456.0
25 : $3,312.0
100 : $3,168.0

TE Connectivity

IPE22EXILBL

TE Connectivity

ILLUM. PUSH BUTTON EXTENDED BLUE Push Button Switch Product Type: General Purpose Push Button Switch Illuminated: With Operating Function: Momentary Number of Actuators: Single Actuator Profile: Extended General Purpose Push Button Switch With Momentary Single | Alcoswitch Pushbutton And Selector Switch Series | Part Number: IPE22EXILBL | Internal Number: 1-2492673-1 | TE Connectivity
RoHS : Compliant

250 : $4.71
100 : $4.9
50 : $5.09
25 : $5.28
10 : $5.47
1 : $5.66

400

IPE22EXILWH

TE Connectivity

ILLUM. PUSH BUTTON EXTENDED WHITE Push Button Switch Product Type: General Purpose Push Button Switch Illuminated: With Operating Function: Momentary Number of Actuators: Single Actuator Profile: Extended General Purpose Push Button Switch With Momentary Single | Alcoswitch Pushbutton And Selector Switch Series | Part Number: IPE22EXILWH | Internal Number: 1-2492673-2 | TE Connectivity
RoHS : Compliant

250 : $4.71
100 : $4.9
50 : $5.09
25 : $5.28
10 : $5.47
1 : $5.66

400

IPE22EXILYL

TE Connectivity

ILLUM. PUSH BUTTON EXTENDED YELLOW Push Button Switch Product Type: General Purpose Push Button Switch Illuminated: With Operating Function: Momentary Number of Actuators: Single Actuator Profile: Extended General Purpose Push Button Switch With Momentary Single | Alcoswitch Pushbutton And Selector Switch Series | Part Number: IPE22EXILYL | Internal Number: 1-2492673-0 | TE Connectivity
RoHS : Compliant

250 : $4.71
100 : $4.9
50 : $5.09
25 : $5.28
10 : $5.47
1 : $5.66

390

IPE22FLGR

TE Connectivity

PUSH BUTTON FLUSH GREEN Push Button Switch Product Type: General Purpose Push Button Switch Illuminated: Without Operating Function: Momentary Number of Actuators: Single Actuator Profile: Flush General Purpose Push Button Switch Without Momentary Single | Alcoswitch Pushbutton And Selector Switch Series | Part Number: IPE22FLGR | Internal Number: 2492672-2 | TE Connectivity
RoHS : Compliant

250 : $4.38
100 : $4.55
50 : $4.73
25 : $4.9
10 : $5.08
1 : $5.25

294

PE-2Z-R Reseller

Link URL