| Reseller | Il numero della parte | Produttore elettronici | Spiegazioni elettronici | Price | Qty. BuyNow |
 TME | 712-10002 HELATAPE PROTECT180
| HellermannTyton | Tape: textile; W: 19mm; L: 25m; Thk: 0.18mm; caoutchouc; black; 15% | 50 : $3.43 20 : $3.69 5 : $3.93 1 : $4.17
|
| 445
 |
712-10001 HELATAPE PROTECT300
| HellermannTyton | Tape: textile; W: 19mm; L: 25m; Thk: 0.3mm; caoutchouc; black; 10% | 50 : $4.08 20 : $4.38 5 : $4.66 1 : $4.96
|
| 140
 |
712-10003 HELATAPE PROTECT250
| HellermannTyton | Tape: textile; W: 19mm; L: 25m; Thk: 0.25mm; caoutchouc; black; 15% | 50 : $4.62 20 : $4.95 5 : $5.28 1 : $5.61
|
| 101
 |
MH60 OSCILLOSCOPE PROBE 100A ACDC 1MHZ
| AEMC Instruments | AC/DC current clamp adapter; Øcable: 26mm; I DC: 500mA÷100A; BNC | | 0
 |
 Avnet Americas | MC33742PEPR2
| NXP Semiconductors | CAN 1Mbps Sleep/Standby/Stop 5V/9V/12V/15V/18V/24V 48-Pin QFN EP T/R - Tape and Reel (Alt: MC33742PEPR2) RoHS : Compliant | 32,000 : $4.56221 16,000 : $4.64086 8,000 : $4.72003 4,000 : $4.79961 2,000 : $4.87831
|
| 0
 |
MC34PF8100EPEPR2
| NXP Semiconductors | PF8100 - Tape and Reel (Alt: MC34PF8100EPEPR2) RoHS : Compliant | 64,000 : $7.1877 32,000 : $7.22475 16,000 : $7.2618 8,000 : $7.29885 4,000 : $7.3359
|
| 0
 |
MC33882PEPR2
| NXP Semiconductors | Power Switch Lo Side 3A 32-Pin QFN EP T/R - Tape and Reel (Alt: MC33882PEPR2) RoHS : Compliant | 32,000 : $4.3414 16,000 : $4.36355 8,000 : $4.3857 4,000 : $4.40785 2,000 : $4.43
|
| 0
 |
 Mouser Electronics | MC33742PEP
| NXP Semiconductors | CAN Interface IC System Basis Chip, CAN, 2x 5.0V/200mA LDOs, 4 wake ups, 15 ms reset duration, QFN 48 RoHS : Compliant | 1 : $9.45 10 : $7.32 25 : $6.79 100 : $6.2 260 : $5.5
|
| 505
 |
MC34PF8100EPEP
| NXP Semiconductors | Power Management Specialized - PMIC Power Management IC, i.MX 8, pre-prog, 7 buck, 4 LDO, Industrial, QFN 56 RoHS : Compliant | 1 : $13.95 10 : $12.71 25 : $8.43 100 : $8.2 260 : $7.67 520 : $7.16
|
| 169
 |
MC33882PEP
| NXP Semiconductors | Power Switch ICs - Power Distribution Driver, Low side, Six Output Switch (0.3 Ohm RDSon), SPI and Parallel Input Control, QFN 32 RoHS : Compliant | 1 : $8.53 10 : $6.6 25 : $6.13 100 : $5.6 260 : $5.21 520 : $5.09 1,040 : $5.02
|
| 49
 |
HAASOSCOPE-PRO-02
| Andy Haas | Benchtop Oscilloscopes Assembled Haasoscope Pro Active Probe, 1x 3' USB A to 12V cable, 1x 3' SMA to BNC cable RoHS : Compliant | | 18
 |
DK30C2DPEPRN
| StarTech | Interface Modules Triple-Monitor USB-C Docking Station, 140W Laptop Charging, 4K 60Hz, TAA RoHS : Compliant | | 4
 |
PEPRMARM
| Pasternack Enterprises | Antenna Accessories Peak roof mount 2nd pole ONLY | 1 : $149.55 10 : $139.99 25 : $138.27
|
| 0
 |
PEPRM1
| Pasternack Enterprises | Antenna Accessories Non-Penetrating Antenna Peak Roof Mount, 1-pole Version, 60-inch Mast, Galvanized Steel with Powder Coating | | 0
 |
PEPRM1-KIT
| Pasternack Enterprises | Antenna Accessories Non-Penetrating Peak Roof Mount with 2 Rubber Mats, 1-pole Version, 60-inch Mast, Galvanized Steel with Powder Coating | | 0
 |
PEPRM2-KIT
| Pasternack Enterprises | Antenna Accessories Non-Penetrating Peak Roof Mount 60-inch Mast, 34-inch Extra Pole and 2 Rubber Mats, 2-pole Version, Galvanized Steel with Powder Coating | | 0
 |
PEPRM2
| Pasternack Enterprises | Antenna Accessories Non-Penetrating Peak Roof Mount 60-inch Mast and 34-inch Extra Pole, 2-pole Version, Galvanized Steel with Powder Coating | | 0
 |
HAASOSCOPE-PRO-01
| Andy Haas | Benchtop Oscilloscopes Assembled Oscilloscope with frequency of 2 GHz, 12 bit resolution, and sample rate of 3,2 GS/s. RoHS : Compliant | | 0
 |
HAASOSCOPE-PRO-03
| Andy Haas | Benchtop Oscilloscopes High performance coaxial cable for using 2 Haasoscope Pro's to oversample a channel at 6.4 GS/s. 6" SMA male to BNC male RG-58 50 Ohm cable RoHS : Compliant | | 0
 |
MC34PF8100EPEPR2
| NXP Semiconductors | Power Management Specialized - PMIC Power Management IC, i.MX 8, pre-prog, 7 buck, 4 LDO, Industrial, QFN 56 RoHS : Compliant | | 0
 |
 Newark | MC33742PEPR2
| NXP Semiconductors | System Basis Chip, Can, Iso 11898-2; |NXP Semiconductors MC33742PEPR2 RoHS : Compliant | 2,000 : $5.19 4,000 : $5.09 6,000 : $4.98 10,000 : $4.88 20,000 : $4.77 50,000 : $4.67
|
| 0
 |
MC33882PEPR2
| NXP Semiconductors | Driver, Low Side, Six Output Switch (0.3; |NXP Semiconductors MC33882PEPR2 RoHS : Compliant | 2,000 : $5.34 4,000 : $5.23 6,000 : $5.13 10,000 : $5.02 20,000 : $4.91 50,000 : $4.81
|
| 0
 |
TEKSCOPE-PRO-SR
| Tektronix Inc | Pro Serial Decode License, Node Locked; |Tektronix, Inc. TEKSCOPE-PRO-SR RoHS : Not Compliant | | 0
 |
MC34PF8100EPEPR2
| NXP Semiconductors | Power Management Ic, I.mx8, Pre-Prog, 7; |NXP Semiconductors MC34PF8100EPEPR2 RoHS : Compliant | 4,000 : $7.56 8,000 : $7.41 12,000 : $7.26 20,000 : $7.11 40,000 : $6.96 100,000 : $6.8
|
| 0
 |
MC34PF8100EPEPR2
| NXP Semiconductors | Power Management Ic, 5.5V, Hvqfn-56; |NXP Semiconductors MC34PF8100EPEPR2 RoHS : Compliant | 4,000 : $11.23 8,000 : $10.33 12,000 : $9.54 20,000 : $8.78 40,000 : $8.0 100,000 : $7.47 200,000 : $7.02
|
| 0
 |
TEKSCOPE-PRO-MIL
| Tektronix Inc | Pro Mil/Gov License, Node Locked; |Tektronix, Inc. TEKSCOPE-PRO-MIL RoHS : Not Compliant | | 0
 |
TEKSCOPE-PRO-PWR
| Tektronix Inc | Pro Power License, Node Locked; |Tektronix, Inc. TEKSCOPE-PRO-PWR RoHS : Not Compliant | | 0
 |
TEKSCOPE-PRO-AUTO
| Tektronix Inc | Pro Automotive License, Node Locked; |Tektronix, Inc. TEKSCOPE-PRO-AUTO RoHS : Not Compliant | | 0
 |
TEKSCOPE-PRO-SR-1Y
| Tektronix Inc | Pro Serial Decode License, Node Locked; |Tektronix, Inc. TEKSCOPE-PRO-SR-1Y RoHS : Not Compliant | | 0
 |
TEKSCOPE-PRO-MIL-3Y
| Tektronix Inc | License; Pro Mil Aero License 3Y |Tektronix, Inc. TEKSCOPE-PRO-MIL-3Y RoHS : Not Compliant | | 0
 |
TEKSCOPE-PRO-PWR-1Y
| Tektronix Inc | Pro Power License, Node Locked; |Tektronix, Inc. TEKSCOPE-PRO-PWR-1Y RoHS : Not Compliant | | 0
 |
TEKSCOPE-PRO-MIL-1Y
| Tektronix Inc | Pro Mil/Gov License, Node Locked; |Tektronix, Inc. TEKSCOPE-PRO-MIL-1Y RoHS : Not Compliant | | 0
 |
TEKSCOPE-PRO-AUTO-1Y
| Tektronix Inc | Pro Automotive License, Node Locked; |Tektronix, Inc. TEKSCOPE-PRO-AUTO-1Y RoHS : Not Compliant | | 0
 |
 RS | DK30C2DPEPRN
| StarTech | TRIPLE-MONITOR USB-C DOCKING STATION, 140W LAPTOP CHARGING, 4K 60HZ, TAA | | 0
 |
K-TYPE PROBE 1M5
| Lascar Electronics | TEMPERATURE PROBE, MINI-THERMOCOUPLE, K-TYPE, STAINLESS STEEL, 1.5M, GREEN PLUG | | 0
 |
HS35IQPROGR83PEPR1
| Dynapar | HOLLOWSHAFT ENCODER, 5/8" BORE, 5-26VDC, IP67, 3M (120") CABLE | | 0
 |
HS35IQPROGRH3PEPR1
| Dynapar | HOLLOWSHAFT ENCODER, 1" BORE, 5-26VDC, IP67, 3M (120") CABLE | | 0
 |
 Onlinecomponents.com | PEPRMARM
| Pasternack Enterprises | | 100 : $125.81 50 : $127.49 20 : $130.99 10 : $136.6 5 : $142.72 1 : $154.23
|
| 0
 |
PEPRM1-KIT
| Pasternack Enterprises | | 5 : $666.72 3 : $684.98 1 : $694.5
|
| 0
 |
PEPRM2
| Pasternack Enterprises | | 5 : $576.54 3 : $577.99 1 : $594.27
|
| 0
 |
PEPRM1
| Pasternack Enterprises | | 5 : $413.99 3 : $419.73 1 : $425.65
|
| 0
 |
PEPRM2-KIT
| Pasternack Enterprises | | 5 : $802.01 3 : $823.98 1 : $835.43
|
| 0
 |
 Rochester Electronics | AD7655SCP-EP-RL
 | Analog Devices Inc | IC ADC 1 CONV 16Bits SAR 2-Wire Serial, DSP, MICROWIRE, Parallel, QSPI, SPI 48-QFN T/R RoHS : Not Compliant | 10,000 : $19.89 1,000 : $21.13 500 : $22.37 100 : $23.62 25 : $24.86
|
| 1,590
 |
MC33742PEPR2
| Freescale Semiconductor | Specialized Power Management System Basis Chip 48-QFN T/R RoHS : Compliant | 10,000 : $4.17 1,000 : $4.43 500 : $4.69 100 : $4.95 25 : $5.21
|
| 580
 |
 Sager | AML51-F20A SCOPE PRESET
| Honeywell Sensing and Control / MICRO SWITCH | Switch Hardware | | 0
 |
 Avnet Silica | MC33742PEPR2
| NXP Semiconductors | CAN 1Mbps SleepStandbyStop 5V9V12V15V18V24V 48Pin QFN EP TR (Alt: MC33742PEPR2) RoHS : Compliant | | 0
 |
MC34PF8100EPEPR2
| NXP Semiconductors | (Alt: MC34PF8100EPEPR2) RoHS : Compliant | | 0
 |
 EBV Elektronik | MC33742PEPR2
| NXP Semiconductors | CAN 1Mbps SleepStandbyStop 5V9V12V15V18V24V 48Pin QFN EP TR (Alt: MC33742PEPR2) RoHS : Compliant | | 0
 |
MC34PF8100EPEPR2
| NXP Semiconductors | (Alt: MC34PF8100EPEPR2) RoHS : Compliant | | 0
 |
 Flip Electronics | MC33742PEPR2
| NXP Semiconductors | Stock, Ship Today | | 8,000
 |
 Pasternack Enterprises US | PEPRM1
| Pasternack Enterprises | Key Specifications. Plating Powder Coat Material Galvanized Steel. Non-Penetrating Antenna Peak Roof Mount, 1-pole Version,60-inch Mast, Galvanized Steel with Powder Coating. The Pasternack’s PEPRM1 non-penetrating antenna peak roof mount is available for antenna installations and it is easy to transport. This 1-pole version non-penetrating antenna roof mount has a strong and rugged design made up of galvanized steel. Our peak roof mount is designed for telecom installers, DIY installers, and satellite dish installers. This 1-pole version communication antenna mount has a 60 inch center mast and doesn’t need screws or anchors, which minimizes damage to the roofs. Our PEPRM1 non-penetrating antenna peak roof mount has operating windspeeds up to 50 Km/h or 31 MPH and survives at windspeeds up to 100 Km/h or 62 MPH. This non-penetrating antenna roof mount has a powder coating to withstand harsh climates and corrosion. This non-penetrating peak roof mount is suitable for wireless internet providers, crypto enterprises, and commercial building owners. Ballast material (i.e, cinder blocks, concrete blocks, etc.) are used in these non-drill roof mounts to anchor them to the roof. The non-penetrating antenna roof mount is used for peak roofs and is available with easy assembly instructions. Pasternack has one of the largest in-stock selection of non-penetrating antenna peak roof mount for international and domestic orders. Make your online purchase right now to take advantage of our same-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the perfect 1-pole version non-penetrating antenna mount for your requirements. Note: Ballast data should be determined by a local professional engineer. Adequate ballast material must be determined and provided by others. | 1 : $413.99 10 : $397.43 25 : $380.87 100 : $364.31
|
| 255
 |
PEPRMARM
| Pasternack Enterprises | Key Specifications.Material: Galvanized SteelPlating: Powder Coat. Non-Penetrating Antenna Peak Roof Mount 34-inch Pole Only. The Pasternack’s PEPRMARM non-penetrating antenna peak roof mount pole is available for antenna installations and it is easy to transport. This 34-inch non-penetrating antenna mount pole has a strong and rugged design made up of galvanized steel. Our peak roof mount is designed for telecom installers, DIY installers, and satellite dish installers, This peak roof mount pole has a powder coating to withstand harsh climates and corrosion. The non-penetrating antenna peak roof mount has operating windspeeds up to 50 Km/h or 31 MPH and survives at windspeeds up to 100 Km/h or 62 MPH. Our non-penetrating roof mount is used for peak roofs and is available with easy assembly instructions, The non-penetrating peak roof mount is suitable for wireless internet providers, crypto enterprises, and commercial building owners that can be mounted on roofs. Ballast material (i.e, cinder blocks, concrete blocks, etc.) are used in these non-drill roof mounts to anchor them to the roof. This non-penetrating antenna peak roof mount pole doesn’t need screws or anchors, which minimizes damage to the roofs, Pasternack has one of the largest in-stock selection of non-penetrating antenna peak roof mount pole for international and domestic orders. Make your online purchase right now to take advantage of our same-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the perfect 34-inch non-penetrating antenna roof mount pole for your requirements, Note: Ballast data should be determined by a local professional engineer. Adequate ballast material must be determined and provided by others. | 1 : $130.99 25 : $124.44 50 : $117.89 100 : $112.65
|
| 94
 |
PEPRM2-KIT
| Pasternack Enterprises | Key Specifications.Material: Galvanized SteelPlating: Powder Coat. Non-Penetrating Peak Roof Mount 60-inch Mast, 34-inch Extra Pole and 2 Rubber Mats, 2-pole Version, Galvanized Steel with Powder Coating. The Pasternack’s PEPRM2-KIT is a non-penetrating antenna peak roof mount kit has 2-pole version non-penetrating peak roof mount (PEPRM2) which includes the 60-inch(PEPRM1) and 34-inch poles(PEPRMARM) and 2 rubber mats (PENPMMAT) that helps in easy installation of satellite dishes and antennas. This kit is used for easy installation of the peak roof mount which is available without pre-assembly. This kit comes with a rubber mat that provides the best surface tension and surface protection. The non-penetrating antenna peak roof mount included in this kit is portable and suitable for a range of roof applications. Ballast material (i.e, cinder blocks, concrete blocks, etc.) are used in these non-drill roof mounts to anchor them to the roof. Pasternack’s non-penetrating antenna peak roof mount kit is available in stock and ready to ship the same day. Different kits are available with easy buy options for 2-pole version non-penetrating antenna peak roof mount kit with detailed step-by-step installation documents. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the perfect non-penetrating antenna peak roof mount kit as per your requirements, Note: Ballast data should be determined by a local professional engineer. Adequate ballast material must be determined and provided by others. | 1 : $823.99 10 : $791.03 25 : $758.07 100 : $725.11
|
| 17
 |
PEPRM1-KIT
| Pasternack Enterprises | Key Specifications. Plating Powder Coat Material Galvanized Steel. Non-Penetrating Peak Roof Mount with 2 Rubber Mats, 1-pole Version, 60-inch Mast, Galvanized Steel with Powder Coating. The Pasternack’s PEPRM1-KIT is a non-penetrating antenna peak roof mount kit that includes 2 rubber mats (PENPMMAT) and 1-pole version non-penetrating peak roof mount (PEPRM1) that helps in easy installation of satellite dishes and antennas. This kit is used for easy installation of the peak roof mount which is available without pre-assembly. , This kit comes with a rubber mat that provides the best surface tension and surface protection. The non-penetrating antenna peak roof mount which has a 60-inch center mast and it is suitable for roof applications. Ballast material (i.e, cinder blocks, concrete blocks, etc.) are used in these non-drill roof mounts to anchor them to the roof. , Pasternack’s non-penetrating antenna peak roof mount kit is available in stock and ready to ship the same day. Different kits are available with easy buy options for 1-pole version peak roof mount kit with detailed step-by-step installation documents. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the perfect non-penetrating antenna peak roof mount kit as per your requirements. Note: Ballast data should be determined by a local professional engineer. Adequate ballast material must be determined and provided by others. | 1 : $684.99 10 : $657.59 25 : $630.19 100 : $602.79
|
| 17
 |
PEPRM2
| Pasternack Enterprises | Key Specifications.Material: Galvanized SteelPlating: Powder Coat. Non-Penetrating Peak Roof Mount 60-inch Mast and 34-inch Extra Pole, 2-pole Version, Galvanized Steel with Powder Coating. The Pasternack’s PEPRM2 non-penetrating antenna peak roof mount is available for antenna installations and it is easy to transport. The 2-pole version communication antenna mount has peak roof top mount with 60 inch center mast(PEPRM1) and 34-inch extra arm(PEPRMARM).This non-penetrating antenna mount has a strong and rugged design made up of galvanized steel. Our peak roof mount is designed for telecom installers, DIY installers, and satellite dish installers, This peak roof mount has a powder coating to withstand harsh climates and corrosion. The NPM mount has operating windspeeds up to 50 Km/h or 31 MPH and survives at windspeeds up to 100 Km/h or 62 MPH. The non-penetrating antenna roof mount is used for peak roofs and is available with easy assembly instructions, This PEPRM2 non-penetrating peak roof mount is suitable for wireless internet providers, crypto enterprises, and commercial building owners. Ballast material (i.e, cinder blocks, concrete blocks, etc.) are used in these non-drill roof mounts to anchor them to the roof. The peak roof mount doesn’t need screws or anchors, which minimizes damage to the roofs, Pasternack has one of the largest in-stock selection of 2-pole version non-penetrating antenna peak roof mount for international and domestic orders. Make your online purchase right now to take advantage of our same-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the perfect 2-pole version non-penetrating antenna mount for your requirements, Note: Ballast data should be determined by a local professional engineer. Adequate ballast material must be determined and provided by others. | 1 : $577.99 10 : $554.87 25 : $531.75 100 : $508.63
|
| 17
 |
 Vyrian | AD7655SCP-EP-RL
 | Analog Devices Inc | ADC, Successive Approximation, 16-Bit, 1 Func, 4 Channel, Serial, Parallel, Word Access RoHS : Compliant | | 9,587
 |
DO-DI-PCIE-PIPE-PROMO
| AMD Xilinx | | | 3,055
 |