| Motore di ricerca datesheet componenti elettronici |
|
S200YR-R Reseller |
| Reseller | Il numero della parte | Produttore elettronici | Spiegazioni elettronici | Price | Qty. BuyNow | |
![]() DigiKey | HCS200/P![]() | Microchip Technology Inc | IC CODE HOPPING ENCODER 8-PDIP RoHS : Compliant |
| 886 | |
| HS363-S200-BLACK | Kabel Kontrol | HEATSHRINK TUBE BLK 3/8"X200' |
| 631 | ||
| HDWM-07-01-G-S-200 | JRH ELECTRONICS | 0.05 |
| 123 | ||
| HS200 4R F | Ohmite Mfg Co | RES CHAS MNT 4 OHMS 1% 200W |
| 61 | ||
| HS358-S200-RED | Kabel Kontrol | HEATSHRINK TUBE RED 5/8"X200' |
| 34 | ||
| HDC9S2000C-759.1 | JRH ELECTRONICS | D-Sub Connector |
| 28 | ||
| MDX15S20000/AA-759.0 | JRH ELECTRONICS | D-Sub Connector |
| 28 | ||
| BRE.0S.200.NAV | POWELL ELECTRONICS | SOCKET BLANKING CAP |
| 26 | ||
| BRR.0S.200.PZSG | POWELL ELECTRONICS | SPRING LOADED DUST CAP |
| 26 | ||
| BRR.0S.200.PZVN | POWELL ELECTRONICS | SPRING LOADED DUST CAP |
| 26 | ||
| HS200 22R J | Ohmite Mfg Co | RES CHAS MNT 22 OHMS 5% 200W |
| 16 | ||
| S200 | Chemtronics | POCKET SOLDER LEAD-FREE SAC 305 |
| 11 | ||
| S200 | Swanstrom Tools USA | PLIER FLAT NOSE SMOOTH |
| 6 | ||
| MDS-200APB36 AA | Delta Electronics Inc | AC/DC CONVERTER 36V 120W |
| 6 | ||
| GP2500S20-0.125-02-0816 | The Bergquist Company | THERM PAD 406.4X203.2MM YLW |
| 5 | ||
![]() Avnet Americas | ECS-200-10-33B-CKM-TR | ECS International Inc | - Tape and Reel (Alt: ECS-200-10-33B-CKM-TR) RoHS : Compliant |
| 15,000 | |
| NCS20082DTBR2G | onsemi | - Tape and Reel (Alt: NCS20082DTBR2G) RoHS : Compliant |
| 10,000 | ||
| ECS-200-18-33Q-DS | ECS International Inc | Crystal 20MHz 18pF 4-Pin SMD T/R - Tape and Reel (Alt: ECS-200-18-33Q-DS) RoHS : Compliant |
| 7,000 | ||
| ECS-200-18-36-AGM-TR | ECS International Inc | - Tape and Reel (Alt: ECS-200-18-36-AGM-TR) RoHS : Compliant |
| 7,000 | ||
| B72214S200K551 | TDK Corporation | TVS Varistor, 20 VAC, 26 VDC, StandarD B722, 65 V, Disc, Radial Leaded, 14 mm - Tape and Reel (Alt: B72214S0200K551) RoHS : Compliant |
| 6,000 | ||
| IRS2008SPBF | Infineon Technologies AG | - Rail/Tube (Alt: IRS2008SPBF) RoHS : Compliant |
| 3,800 | ||
| NCS20061SN3T1G | onsemi | - Tape and Reel (Alt: NCS20061SN3T1G) RoHS : Compliant |
| 3,000 | ||
| ECS-200-20-30B-DU | ECS International Inc | Crystal 20MHz 20pF 4-Pin SMD T/R - Tape and Reel (Alt: ECS-200-20-30B-DU) RoHS : Compliant |
| 2,000 | ||
| ECS-200-20-5PX-TR | ECS International Inc | - Tape and Reel (Alt: ECS-200-20-5PX-TR) RoHS : Compliant |
| 2,000 | ||
| RWR80S2000FRS70 | Vishay Intertechnologies | Through Hole Resistor, 200 ohm, RWR Series, 2 W, ? 1%, Axial Leaded, Wirewound, ? 20ppm/?C - Tape and Reel (Alt: RWR80S2000FRS70) RoHS : Not Compliant |
| 1,000 | ||
| ATS200SM-T | CTS Corporation | - Tape and Reel (Alt: ATS200SM-1) RoHS : Compliant |
| 1,000 | ||
| RWR89S2000FRS73 | Vishay Intertechnologies | Through Hole Resistor, 200 ohm, RWR Series, 3 W, ? 1%, Axial Leaded, Wirewound, ? 20ppm/?C - Tape and Reel (Alt: RWR89S2000FRS73) RoHS : Not Compliant |
| 500 | ||
| LRS-200-48 | Mean Well | - Boxed Product (Development Kits) (Alt: LRS-200-48) RoHS : Compliant |
| 9 | ||
| LRS-200-24 | Mean Well | - Boxed Product (Development Kits) (Alt: LRS-200-24) RoHS : Compliant |
| 8 | ||
| AMES200-48SNZ-P | Aimtec | AC/DC Enclosed Power Supply (PSU), Industrial & ITE, Adjustable, Fixed, 1 Output, 211.2 W, 48 VDC - Boxed Product (Development Kits) (Alt: AMES200-48SNZ-P) RoHS : Compliant |
| 5 | ||
![]() Newark | EP1WSS200RJ | TE Connectivity | RESISTOR, 200R, 5%, 1W, AXIAL; RoHS : Compliant |
| 7,660 | |
| AS-20.000-18-FUND | Raltron Electronics Corporation | CRYSTAL, 20MHZ, 18PF, HC-49S; Frequency Nom:20MHz; Crystal Case:Through Hole, 10.3mm x 5mm; Frequency Stability + / -:50ppm; Load Capacitance:18pF; Frequency Tolerance + / -:30ppm; Product Range:AS Series; Crystal Type:MicroprocessorRoHS Compliant: Yes RoHS : Compliant |
| 7,173 | ||
| ECS-200-10-37B2-JTN-TR | ECS International Inc | CRYSTAL, 20MHZ, 10PF, SMD, 2MM X 1.6MM; RoHS : Compliant |
| 2,243 | ||
ABLS-20.000MHZ-B-4-Y-T![]() | Abracon Corporation | CRYSTAL, 20MHZ, 18PF, SMD, HC/49US; RoHS : Compliant |
| 1,009 | ||
ABLS-20.000MHZ-B-4-Y-T![]() | Abracon Corporation | CRYSTAL, 20MHZ, 18PF, SMD, HC/49US; RoHS : Compliant |
| 1,009 | ||
ABLS-20.000MHZ-16-A-4-H-T![]() | Abracon Corporation | CRYSTAL, 20MHZ, 16PF, SMD, HC/49US; RoHS : Compliant |
| 795 | ||
ABLS-20.000MHZ-16-A-4-H-T![]() | Abracon Corporation | CRYSTAL, 20MHZ, 16PF, SMD, HC/49US; RoHS : Compliant |
| 795 | ||
| ECS-200-CDX-0998 | ECS International Inc | CRYSTAL, 20MHZ, 20PF, SMD, 3.2MMX2.5MM; RoHS : Compliant |
| 510 | ||
| ECS-200-CDX-0998 | ECS International Inc | CRYSTAL, 20MHZ, 20PF, SMD, 3.2MMX2.5MM; RoHS : Compliant |
| 510 | ||
ABLS-20.000MHZ-B-4-Y-T![]() | Abracon Corporation | CRYSTAL, 20MHZ, 18PF, SMD, HC/49US; RoHS : Compliant |
| 294 | ||
ABLS-20.000MHZ-B-4-Y-T![]() | Abracon Corporation | CRYSTAL, 20MHZ, 18PF, SMD, HC/49US; RoHS : Compliant |
| 294 | ||
| C5S-20.000-12-50100-X1 | Aker Technology Company Ltd | CRYSTAL, 20MHZ, 12PF, 5MM X 3.2MM; RoHS : Compliant |
| 104 | ||
| C5S-20.000-12-50100-X1 | Aker Technology Company Ltd | CRYSTAL, 20MHZ, 12PF, 5MM X 3.2MM; RoHS : Compliant |
| 104 | ||
| HCSD-17-S-20.00-01-T | Samtec Inc | CABLE ASSY, 34P IDC RCPT-FREE END, 508MM; RoHS : Compliant |
| 16 | ||
| HS200 680R J | Ohmite Mfg Co | RES, 680R, 5%, 200W, WIREWOUND; RoHS : Compliant |
| 8 | ||
![]() Analog Devices Inc | DS1023S-200+ | Analog Devices Inc | 8-Bit Programmable Timing Elem RoHS : Compliant |
| 4,530 | |
| DS1023S-200+T&R | Analog Devices Inc | 8-Bit Programmable Timing Elem RoHS : Compliant |
| 0 | ||
![]() RS | 1602998 (RC-1KS2000) | Phoenix Contact | CRIMP CONTACT TURNED 1MM RC-1KS2000 |
| 110 | |
| 1605566 (SF-6FS2000) | Phoenix Contact | SF SERIES SERIES SIZE 1MM FEMALE CRIMPCONTACT FOR USE WITH PLUSCON CONNECTOR |
| 24 | ||
| AS2002F-06A | SMC Corporation of America | SPEED CONTROL, AIR, INLINE, PUSH LOCK, SZ 1/8", FOR 6MM TUBE RoHS : Compliant |
| 7 | ||
| LS200-15 (LS20015) | TDK-Lambda Corporation | POWER SUPPLY, AC-DC,15V,13.4A,86-264V IN, ENCLOSED, DIN RAIL, PFC,201W, LS SERIES |
| 6 | ||
| LS200-36 (LS20036) | TDK-Lambda Corporation | POWER SUPPLY, AC-DC,36V,5.6A,86-264V IN, ENCLOSED, PANEL MOUNT, PFC,202W, LS SERIES |
| 3 | ||
| AS200LG | nVent Hoffman | HOL-SEALERS, HOLE SEAL, 3.00-INCH DIAMETER, LIGHT GRAY, MILD STEEL |
| 2 | ||
| CS2002-11 | Edwards Signaling | MANUAL PULL STATION, YELLOW, SINGLE ACTION, WEATHERPROOF, 270A-SPC SERIES |
| 2 | ||
| VFS2000-LP-02 | SMC Corporation of America | SUB-PLATE, 1/4 IN. EXHAUST PORT SIZE, VFS2000 SERIES |
| 2 | ||
| E4PA-LS200-M1-N (E4PALS200M1N) | OMRON Industrial Automation | ULTRASONIC SWITCH |
| 2 | ||
| WS2000W | Hubbell Wiring Device-Kellems | OCCUPANCY/VACANCY SENSOR, WALL SWITCH, PASSIVE INFRARED, 277VAC, WHITE, 3-WAY |
| 1 | ||
| LS2007.5 | TDK-Lambda Corporation | POWER SUPPLY, AC-DC, 85264VACACDC,115/230VAC, OUTPUT 7.5V 26.7A,201W |
| 1 | ||
| SS-200X3-FB | Bimba Manufacturing Company | CYLINDER, COMPACT, 2 IN BORE, MEAD |
| 1 | ||
| RS20-0800S2S2TDAP | Hirschmann Electronics GmbH & Co Kg | ETHERNET SWITCH, RS20-0800S2S2TDAP |
| 1 | ||
| S200 | Chemtronics | SOLDER, CIRCUITWORKS LEAD-FREE POCKET SOLDER, 1MM DIA/3.18M LENGTH |
| 0 | ||
| S200 | B-Line by Eaton | ENCLOSURE, ACCESSORY, S200 |
| 0 | ||
![]() Microchip Technology Inc | HCS200-I/P![]() | Microchip Technology Inc | Code Hopping Encoder 3.5- 13V, PDIP, Projected EOL: 2036-01-01 RoHS : Compliant |
| 6,960 | |
HCS200/P![]() | Microchip Technology Inc | Code Hopping Encoder 3.5- 13V, PDIP, Projected EOL: 2036-01-01 RoHS : Compliant |
| 395 | ||
HCS200-I/SN![]() | Microchip Technology Inc | Code Hopping Encoder 3.5- 13V, SOIC, Projected EOL: 2036-01-01 RoHS : Compliant |
| 330 | ||
HCS200/SN![]() | Microchip Technology Inc | Code Hopping Encoder 3.5- 13V, SOIC, Projected EOL: 2036-01-01 RoHS : Compliant |
| 100 | ||
| 90KS200CH3 | Microchip Technology Inc | Bi-Directional TVS _ 5R, Projected EOL: 2049-02-05 RoHS : Compliant |
| 18 | ||
| S2005 | Microchip Technology Inc | Std Rectifier _ DO-4, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| TFS2007 | Microchip Technology Inc | TFS2007, Projected EOL: 2050-07-31 - Contact for Pricing RoHS : Compliant | 0 | |||
| TFS200N | Microchip Technology Inc | TFS200N, Projected EOL: 2050-07-31 - Contact for Pricing RoHS : Compliant | 0 | |||
| 90KS200CH1 | Microchip Technology Inc | Bi-Directional TVS _ Molded Case 11, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| 60KS200CH2 | Microchip Technology Inc | Bi-Directional TVS _ Molded Case 11, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| 60KS200CH3 | Microchip Technology Inc | Bi-Directional TVS _ Molded Case 11, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
HCS200T/SN![]() | Microchip Technology Inc | Code Hopping Encoder 3.5- 13V, SOIC, Projected EOL: 2036-01-01 RoHS : Compliant |
| 0 | ||
| IS2008S-203 | Microchip Technology Inc | Bluetooth v4.1 Stereo Headset and DSP Products, VQFN, Projected EOL: 2028-06-08 - Contact for Pricing RoHS : Compliant | 0 | |||
HCS200T-I/SN![]() | Microchip Technology Inc | Code Hopping Encoder 3.5- 13V, SOIC, Projected EOL: 2036-01-01 RoHS : Compliant |
| 0 | ||
| IS2008S-203-TRAY | Microchip Technology Inc | Bluetooth v4.1 Stereo Headset and DSP Products, VQFN, Projected EOL: 2028-06-08 - Contact for Pricing RoHS : Compliant | 0 | |||
![]() Bisco Industries | CS2004SK-04-1-A | Fastener Innovation Technology | 693 | |||
| MS20034-5 | MS Bolts | 150 | ||||
| MS20067-147 | MS Miscellaneous | 53 | ||||
| MS20005-16 | MS Bolts | 13 | ||||
| MS20066-190 | MS Miscellaneous | 10 | ||||
| MS20004-44 | MS Bolts | 8 | ||||
| MS20073-04-05 | MS Bolts | 5 | ||||
| MS20001-H6-1590 | MS HINGES | 5 | ||||
| MS20066-138 | MS Miscellaneous | 4 | ||||
| MS20002-8 | Moeller Manufacturing & Supply | 4 | ||||
| MS20001H4-7200 | MS HINGES | 3 | ||||
| MS20073-03-03 | MS Bolts | 3 | ||||
| MS20068-167 | MS Miscellaneous | 2 | ||||
| MS20001PY12-188 | MS HINGES | 1 | ||||
| MS20004-28 | MS Bolts | 1 | ||||
![]() Rochester Electronics | AFT09S200W02GNR3 | NXP Semiconductors | Airfast RF Power LDMOS Transistor RoHS : Compliant |
| 220 | |
| BLF10M6LS200U,112 | NXP Semiconductors | BLF10M6LS200, Power LDMOS transistor, SOT502 (LDMOST) RoHS : Compliant |
| 260 | ||
| NCS20091SN2T1G | onsemi | NCS20091 - Operational Amplifier, 5.5V Rail-to-Rail Input and Output, 350 kHz, Dual RoHS : Compliant |
| 48,933 | ||
| NCS20062DR2G | onsemi | Op Amp Standard 3MHz 8-SOIC T/R RoHS : Compliant |
| 326 | ||
| NCS20072DMR2G | onsemi | Operational Amplifier, 2 Func, 4000uV Offset-Max, CMOS, PDSO8 RoHS : Compliant |
| 200 | ||
| NCS2003SN2T1G | onsemi | Op Amp Standard 7MHz SOT-23-5 T/R RoHS : Compliant |
| 6,398 | ||
| IRS2008SPBF | Infineon Technologies AG | Half Bridge Based MOSFET Driver, CMOS, PDSO8 RoHS : Compliant |
| 4,555 | ||
| ADSP21CSP01BS200 | Analog Devices Inc | Digital Signal Processor, 16-Bit Size, CMOS, PQFP160 RoHS : Not Compliant |
| 4,739 | ||
| ADSP21CSP01KS200 | Analog Devices Inc | Digital Signal Processor, 16-Bit Size, CMOS, PQFP160 RoHS : Not Compliant |
| 39 | ||
TPS2001DDBVT![]() | Texas Instruments | Power Distribution Switch USB Switch N-Channel 1 OUT High Side SOT-23-5 T/R RoHS : Compliant |
| 20 | ||
TPS2001DDBVR![]() | Texas Instruments | Power Distribution Switch USB Switch N-Channel 1 OUT High Side SOT-23-5 T/R RoHS : Compliant |
| 412 | ||
| CY7C1360S-200AXC | Cypress Semiconductor | 9-Mbit (256K x 36) Pipelined SRAM RoHS : Compliant |
| 606 | ||
71P74604S200BQG![]() | Integrated Device Technology Inc | 18Mbit Pipelined QDRII SRAM Burst Of 2 RoHS : Compliant |
| 45 | ||
| 71V35761S200BGGI | Integrated Device Technology Inc | 128K X 36 3.3V Synchronous SRAM 3.3V I/O, Pipelined Output Burst Counter, Single Cycle Deselect RoHS : Compliant |
| 74 | ||
| DS2004CM | National Semiconductor Corporation | Small Signal Bipolar Transistor, 0.5A I(C), 50V V(BR)CEO, 7-Element, NPN, Silicon RoHS : Not Compliant |
| 1,536 | ||
![]() TME | FP2-S200-R | Eaton Corporation | Inductor: wire; SMD; 200nH; R: 280uΩ; ±15%; FP2; 7.2x6.7x5mm; 19A RoHS : Compliant |
| 7,600 | |
| HS200 22R J | Arcol | Resistor: wire-wound; 22Ω; with heatsink; screw; 200W; ±5%; 1.9kV |
| 62 | ||
| HS200 1K F | Arcol | Resistor: wire-wound; 1kΩ; screw; 200W; ±1%; 1.9kV; 100ppm/°C |
| 55 | ||
| LFBLL-SW860-24V-5S200-20-IC | ledxon GmbH | LED tape; white cold; Case (mm): 3528; LED/m: 50; 12mm; IP20; 120° |
| 36 | ||
| HS200 4R F | Arcol | Resistor: wire-wound; 4Ω; screw; 200W; ±1%; 1.9kV; 89.7x72.5x41.8mm |
| 33 | ||
| RPS-200-15-C | Mean Well | Power supply: switching; open; 200W; 113÷370VDC; 80÷264VAC; OUT: 1 RoHS : Compliant |
| 3 | ||
| BXRE-57S2001-C-73 | Bridgelux Inc | Power LED; white cold; 5700K; 120°; Front: flat; 630mA; 19x19x1.7mm |
| 0 | ||
| GN 711-KUS-200-W-M | Elesa+Ganter | Ruler; M; W: 11mm; silver; plastic; Length: 200mm; self-adhesive |
| 0 | ||
| HSS-100 305 150 S 2000 | Ingun Prufmittelbau GmbH | Test acces: test needle; Maksimum spring compression: 6.35mm |
| 0 | ||
| FS200R12N3T7BPSA1 | Infineon Technologies AG | Module: IGBT; NTC thermistor; Ic: 200A; AG-ECONO3B; Inverter RoHS : Compliant |
| 0 | ||
DSS20-0015B![]() | IXYS Corporation | Diode: Schottky rectifying; THT; 15V; 20A; TO220AC; Ufmax: 0.33V RoHS : Compliant |
| 0 | ||
| FMS-200MA | OptiFuse | Fuse: fuse; TR5; THT,holders; 200mA; 250VAC; FMS; copper alloy |
| 0 | ||
| IRS2008MTRPBFXUMA1 | Infineon Technologies AG | IC: driver RoHS : Compliant |
| 0 | ||
| DTMSS-20/0.068/4.0-V | Feryster | Inductor: wire; THT; 68uH; 4A; R: 45.1mΩ; Inductor: toroidal; W: 9.5mm |
| 0 | ||
| FS200R12KT4RB11BOSA1 | Infineon Technologies AG | Module: IGBT; transistor/transistor; IGBT three-phase bridge RoHS : Compliant |
| 0 | ||
![]() Ameya Holding Limited | TPS2001EDBVR | Texas Instruments | RoHS : Compliant | 63,079 | ||
| TPS2000EDGKR | Texas Instruments | RoHS : Compliant | 34,090 | |||
NCS2001SN1T1G![]() | onsemi | 0.9V, Rail-to-Rail, Single Operational Amplifiers RoHS : Compliant | 33,100 | |||
| NCS20071XV53T2G | onsemi | RoHS : Compliant | 12,000 | |||
| NCS20082DR2G | onsemi | 1.2MHz,Rail-to-Rail I/O,Dual Op-Amp RoHS : Compliant | 10,000 | |||
| NCS20074DTBR2G | onsemi | NCS20074 Series 36 V 3 MHz Rail-to-Rail Output Operational Amplifier - TSSOP-14 RoHS : Compliant | 10,000 | |||
| NCS20071SN2T1G | onsemi | General Purpose Amplifier 1 Circuit Rail-to-Rail - TSOP-5 RoHS : Compliant | 9,000 | |||
| BD9S200MUF-CE2 | ROHM Semiconductor | RoHS : Compliant |
| 5,950 | ||
| NCS20061MUTAG | onsemi | RoHS : Compliant | 3,000 | |||
| WDS200T1R0C | Western Digital Corp | 200 | ||||
| WDS200T2R0A | Western Digital Corp | 200 | ||||
| RB088NS200FHTL | ROHM Semiconductor | Diodes Rectifiers Single RoHS : Compliant |
| 100 | ||
| RB218NS200FHTL | ROHM Semiconductor | Diodes Rectifiers Single RoHS : Compliant |
| 100 | ||
| RB088NS200TL | ROHM Semiconductor | RoHS : Compliant |
| 60 | ||
| RB218NS200TL | ROHM Semiconductor | RoHS : Compliant |
| 20 | ||
![]() ComSIT USA | ACASA1001S2001P1AT | Vishay Intertechnologies | AVAILABLE EU RoHS : Compliant | 1,145 | ||
| DS2003TMXNOPB | AVAILABLE EU | 1,697 | ||||
| XC3S20004FGG676C | AMD Xilinx | AVAILABLE EU | 9 | |||
| STTS2004B2DN3F | STMicroelectronics | AVAILABLE EU RoHS : Compliant | 1,443 | |||
| ECS2001033BCKMTR | ECS International Inc | AVAILABLE EU | 83 | |||
| ECS200933BCKYTR | Epson Electronics America Inc | AVAILABLE EU | 20,801 | |||
![]() ComSIT USA | 74HC74DS200 | NXP Semiconductors | Dual D-type flip-flop with set and reset; positive edge-trigger D Flip-Flop, HC/UH Series, 2-Func, Positive Edge Triggered, 1-Bit, Complementary Output, CMOS, PDSO14 RoHS : Compliant | 16,560 | ||
| S200DS6CTAP | Telefunken Semiconductor GmbH & Co Kg | Electronic Component RoHS : Not Compliant | 10,000 | |||
| B72207S200K105V57 | TDK Electronics | Electronic Component RoHS : Compliant | 6,000 | |||
| IRLMS2002TR | International Rectifier | HEXFET POWER MOSFET Power Field-Effect Transistor, 6.5A I(D), 20V, 0.03ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Not Compliant | 2,900 | |||
| NCS20032DR2G | onsemi | LOW VOLTAGE, RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIER Operational Amplifier, 2 Func, 5000uV Offset-Max, PDSO8 RoHS : Compliant | 2,500 | |||
| B72220S200K101V57 | TDK Electronics | SIOV METAL OXIDE VARISTOR Varistor, 26V, 18J, Through Hole Mount RoHS : Compliant | 2,250 | |||
IRS2001PBF![]() | International Rectifier | HIGH AND LOW SIDE DRIVER Buffer/Inverter Based Peripheral Driver, CMOS, PDIP8 RoHS : Compliant | 950 | |||
| HCS200ISN | mct | KEELOQ CODE HOPPING ENCODER Data Encryption Circuit, PDSO8 RoHS : Not Compliant | 469 | |||
AUIRS2004S![]() | International Rectifier | HALF-BRIDGE DRIVER IC Half Bridge Based Peripheral Driver, CMOS, PDSO8 RoHS : Not Compliant | 190 | |||
| XC3S200AN4FTG256C | AMD Xilinx | SPARTAN-3AN FPGA Field Programmable Gate Array, 448 CLBs, 200000 Gates, 667MHz, 4032-Cell, CMOS, PBGA256 RoHS : Compliant | 46 | |||
| XC3S2004TQG144I | AMD Xilinx | SPARTAN-3 FPGA FAMILY Field Programmable Gate Array, 480 CLBs, 200000 Gates, 630MHz, 4320-Cell, CMOS, PQFP144 RoHS : Compliant | 29 | |||
| XC2S2006PQG208C | AMD Xilinx | SPARTAN-II 2.5V FPGA Field Programmable Gate Array, 1176 CLBs, 200000 Gates, 263MHz, 5292-Cell, PQFP208 RoHS : Compliant | 20 | |||
| CS200L2 | Isocom Components | CERAMIC HERMETICALLY SEALED TRANSISTOR OPTOCOUPLER Transistor Output Optocoupler, 1-Element, 1500V Isolation RoHS : Not Compliant | 7 | |||
| XC3S2004FT256C | AMD Xilinx | SPARTAN-3 FPGA FAMILY Field Programmable Gate Array, 480 CLBs, 200000 Gates, 630MHz, 4320-Cell, CMOS, PBGA256 RoHS : Not Compliant | 1 | |||
| EP3CLS200F780I7 | Altera Corporation | CYCLONE III LOW POWER FPGA Field Programmable Gate Array, 198464 CLBs, 450MHz, 198464-Cell, CMOS, PBGA780 RoHS : Not Compliant | 1 | |||
![]() GLYN GmbH & Co. KG | XC3S200A-4FTG256I![]() | AMD Xilinx | Spartan-3A FPGA 256FTBG -40/100øC RoHS : Compliant | 600 | ||
XC3S200A-4VQG100I![]() | AMD Xilinx | Spartan-3A FPGA 100-VQFP -40/+100øC RoHS : Compliant | 250 | |||
| 070431FB015S200ZU | Suyin Group | 15pol ultra thinDSUB h.density 7731S-1 5G2T RoHS : Compliant | 10 | |||
![]() Interstate Connecting Components | CBD11W1S20000/AA | Amphenol Positronic | 0 | |||
| CBD17W2M37S2000/AA | Amphenol Positronic | 0 | ||||
| CBD9W4S2000S | Amphenol Positronic | RoHS : Not Compliant | 0 | |||
| CBM7W2S200T0 | Amphenol Positronic | RoHS : Not Compliant | 0 | |||
| CBM9W4S200E0/AA | Amphenol Positronic | RoHS : Compliant | 0 | |||
| CBM9W4S200E2X/AA | Amphenol Positronic | 0 | ||||
| HDC37S200ES/AA | Amphenol Positronic | RoHS : Compliant | 0 | |||
| HDC9S2000C-759.1 | Amphenol Positronic | 0 | ||||
| EPCB25S2000K2 | Amphenol PCD | D-SUB PLUG, 25CTS | 0 | |||
| ES-2003-T121 | TE Connectivity | EMERGENCY SWITCH ES-2003-T121 RoHS : Compliant |
| 0 | ||
| ES2000-NO.4-B7-0-100MM | TE Connectivity | 7-1190948-1,130599P014 RoHS : Compliant |
| 0 | ||
| ES2000-NO.4-B7-0-38MM | TE Connectivity | 38MM BLACK H.S. TUBE PCS RoHS : Compliant |
| 0 | ||
| 882-008-MS-.200-686A | Glenair Inc | 0 | ||||
| DD104S200E3X/AA | Amphenol Positronic | RoHS : Compliant | 0 | |||
| DD15S200E2S | Amphenol Positronic | 0 | ||||
![]() NexGen Digital | S2AP500U101M1S2001W | Johanson Dielectrics Inc | 141,000 | |||
| CSACS20.00MX53Q-TC | Murata Manufacturing Co Ltd | 29,000 | ||||
| MKS2/0.01/63/5 | Wima | 5,292 | ||||
| ZHCS2000TA | Zetex / Diodes Inc | RoHS : Compliant | 1,067 | |||
| ACASA2002S2002P1AT | Vishay Huntington | 372 | ||||
| ACASA1001S2001P100 | Vishay Huntington | 367 | ||||
XC3S200-4TQG144I![]() | AMD Xilinx | RoHS : Compliant | 88 | |||
| MSS20-047-0805 | MACOM | 20 | ||||
![]() PEI Genesis | MSS2000 | Sure Seal Connections |
| 2 | ||
| BRE.0S.200.NAV | LEMO connectors | RoHS : Compliant |
| 0 | ||
| BRR.0S.200.PZVN | LEMO connectors | RoHS : Compliant |
| 0 | ||
| BRE.1S.200.NAS | LEMO connectors | RoHS : Compliant |
| 0 | ||
| D2300 S/2000MM | CONTA-CLIP Inc |
| 0 | |||
| MGS200-SMSM-1.0M | Times Microwave Systems |
| 0 | |||
| 06A1001S2008N3 | SOURIAU-SUNBANK |
| 0 | |||
| 06A1012S2007CN3 | SOURIAU-SUNBANK |
| 0 | |||
| 06A1015S2004P3 | SOURIAU-SUNBANK |
| 0 | |||
| 06A1012S2008N2 | SOURIAU-SUNBANK |
| 0 | |||
| CBM36W4S20000 | Amphenol Positronic | RoHS : Not Compliant |
| 0 | ||
| 57A1001S2003C4 | SOURIAU-SUNBANK |
| 0 | |||
| DD26S200E2X/AA | Amphenol Positronic | RoHS : Compliant |
| 0 | ||
| ESS20-003-DC24V-1A/2A | E-T-A |
| 0 | |||
| CBM5W1S20000/AA | Amphenol Positronic | RoHS : Compliant |
| 0 | ||
![]() Powell Electronics | DW-04-10-G-S-200 | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 229 | |
| DWM-02-53-G-S-200 | Samtec Inc | .050" x .100" Flex Stack, Flexible Micro RoHS : Compliant |
| 189 | ||
| DWM-04-51-S-S-200 | Samtec Inc | .050" x .100" Flex Stack, Flexible Micro RoHS : Compliant |
| 165 | ||
| DWM-05-51-T-S-200 | Samtec Inc | .100 Elevated Single Row Screw Machine S RoHS : Compliant |
| 156 | ||
| DW-10-12-T-S-200 | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 146 | ||
| DWM-06-52-L-S-200 | Samtec Inc | .050" x .100" Flex Stack, Flexible Micro RoHS : Compliant |
| 146 | ||
| EW-12-09-G-S-200 | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 142 | ||
| HDWM-07-01-G-S-200 | Samtec Inc | .050" X .100" Flex Stack, High-Temp Micr RoHS : Compliant |
| 108 | ||
| DW-16-08-S-S-200 | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 106 | ||
| EW-14-15-L-S-200 | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 106 | ||
| DW-20-15-T-S-200 | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 79 | ||
| DWM-15-53-G-S-200 | Samtec Inc | Cable Assembly, Wire-to-Board, Dual-Row RoHS : Compliant |
| 75 | ||
| DW-50-10-T-S-200 | Samtec Inc | Cable Assembly, Wire-to-Board, Dual-Row RoHS : Compliant |
| 63 | ||
| DWM-17-51-S-S-200 | Samtec Inc | .050" x .100" Flex Stack, Flexible Micro RoHS : Compliant |
| 61 | ||
| BRR.0S.200.PZSG | LEMO connectors | Sprung Cap F. Recpt RoHS : Compliant |
| 2 | ||
![]() PUI | TMS-200MA | 1,725 | ||||
![]() Richardson RFPD | HS200 1K F | Ohmite Mfg Co | Aluminium Housed Resistors Other Mounting RoHS : Compliant |
| 0 | |
| FP2-S200-R | Eaton Corporation | Inductor Power Wirewound 0.2uH 15% 1MHz Ferrite 37 RoHS : Compliant |
| 0 | ||
| L37S200S05J | Tamura Corporation of America | Open Loop Current Sensor DC Current 5V RoHS : Compliant |
| 0 | ||
| HS200 680R J | Ohmite Mfg Co | Aluminium Housed Resistors Other Mounting RoHS : Compliant |
| 0 | ||
| HS200 220R F | Ohmite Mfg Co | Res Wirewound 220 Ohm 1% 50W/200W ±100ppm/C Alumin RoHS : Compliant |
| 0 | ||
| HS200 2R2 F | Ohmite Mfg Co | Aluminium Housed Resistors Other Mounting RoHS : Compliant |
| 0 | ||
| MSS20-047-0805 | MACOM | Zero Bias Schottky Diodes RoHS : Compliant | 0 | |||
| MSS20.047-E25 | MACOM | Zero Bias Schottky Diodes | 0 | |||
| NHS200 4R F | Ohmite Mfg Co | NHS200 4R F RoHS : Compliant |
| 0 | ||
| HS200 15R F | Ohmite Mfg Co | Res Wirewound 15 Ohm 1% 50W/200W ±100ppm/C Aluminu RoHS : Compliant |
| 0 | ||
| 100C331JMS2000X | Kyocera AVX Components | MULTILYRCERAMIC CAP RoHS : Compliant | 0 | |||
| NHS200 3R F | Ohmite Mfg Co | NHS200 3R F RoHS : Compliant |
| 0 | ||
| MSS20-047-E28X | MACOM | Zero Bias Schottky Diodes RoHS : Compliant | 0 | |||
| 476CKS200MTJG | Knowles CDE | Cap Aluminum Lytic 47uF 200V 20% (12.5 X 20mm) Rad RoHS : Compliant | 0 | |||
| 600S200FT250 | Kyocera AVX Components | MULTILYRCERAMIC CAP RoHS : Compliant | 0 | |||
![]() Chip 1 Exchange | ES2000-NO.1-C1-0-60MM | TE Connectivity | INSTOCK RoHS : Compliant | 390,000 | ||
| FP2-S200-R | Eaton Corporation | INSTOCK RoHS : Compliant | 11,073 | |||
| NCS20032DMR2G | onsemi | INSTOCK RoHS : Compliant | 9,880 | |||
| FHS200V224J420 | INSTOCK | 8,000 | ||||
| NCS20032DR2G | onsemi | INSTOCK RoHS : Compliant | 5,157 | |||
| IRLMS2002TR | INSTOCK | 3,000 | ||||
| NCS20072DTBR2G | onsemi | INSTOCK RoHS : Compliant | 2,437 | |||
| RPE113-901C0G103J100M6081S200 | INSTOCK | 2,000 | ||||
| ES2000-NO.2-B9-0-20MM | TE Connectivity | INSTOCK RoHS : Compliant | 1,496 | |||
XC3S200-4TQG144I![]() | AMD Xilinx | INSTOCK RoHS : Compliant | 1,432 | |||
| NCS20091SN2T1G | onsemi | INSTOCK RoHS : Compliant | 1,397 | |||
| DW-05-07-T-S-200 LF | Samtec Inc | INSTOCK | 1,307 | |||
CS2000CP-CZZ![]() | Cirrus Logic | INSTOCK RoHS : Compliant | 825 | |||
| XC3S2000-4FG900C | AMD Xilinx | INSTOCK RoHS : Not Compliant | 9 | |||
| ATS200SM-T | CTS Corporation | INSTOCK RoHS : Compliant | 4 | |||
![]() Avnet Abacus | POS200GT-73-270KAA | Vitrohm Portuguesa LDA | Resistor 270 kOhm 2 2 W Axial Leaded Metal Oxide Power - Tape and Reel (Alt: POS200GT-73-270KAA) RoHS : Compliant | 119,000 | ||
| B72214S200K101 | TDK Corporation | TVS Varistor 20 VAC 26 VDC StandarD B722 65 V Disc Radial Leaded 14 mm (Alt: B72214S0200K101) RoHS : Compliant | 74,000 | |||
| ECS-200-12-33Q-JES-TR | ECS International Inc | Crystal 20 MHz SMD 32mm x 25mm 50 ppm 12 pF 20 ppm ECX33Q Series - Tape and Reel (Alt: ECS-200-12-33Q-JES-TR) RoHS : Compliant | 33,000 | |||
| B57236S200M | TDK Corporation | Thermistor ICL NTC 20 Ohm 115 mm 28 A B57236S0 (Alt: B57236S0200M000) RoHS : Compliant | 26,000 | |||
| SF-1206S200-2 | Bourns Inc | - Tape and Reel (Alt: SF-1206S200-2) RoHS : Compliant | 25,000 | |||
| B57153S200M51 | TDK Corporation | Thermistor ICL NTC 20 Ohm 85 mm 16 A B57153S0 (Alt: B57153S0200M051) RoHS : Compliant | 21,000 | |||
| B72220S200K101 | TDK Corporation | TVS Varistor 20 VAC 26 VDC StandarD B722 65 V Disc Radial Leaded 20 mm (Alt: B72220S0200K101) RoHS : Compliant | 12,250 | |||
| B66359S2000X | TDK Corporation | Yoke for ETD 291610 Ferrite Core Stainless Spring Steel (Alt: B66359S2000X000) RoHS : Compliant | 7,200 | |||
| TW-06-02-T-S-200-SM-P-FR | Samtec Inc | Board Stackers Spacers Pin Header 508 mm 6 Contacts Solder 1 Rows 2 mm TW Series (Alt: TW-06-02-T-S-200-SM-P-FR) RoHS : Compliant | 5,225 | |||
| 8638PSS2005LF | Amphenol Corporation | Contact SKT Solder Cup ST Cable Mount (Alt: 8638PSS2005LF) RoHS : Compliant | 2,900 | |||
| B72207S200K101 | TDK Corporation | TVS Varistor 250 VAC 320 VDC StandarD B722 650 V Disc Radial Leaded 7 mm (Alt: B72207S0200K101) RoHS : Compliant | 1,500 | |||
ABLS-20.000MHZ-B2-T![]() | Abracon Corporation | Crystal HC49US AT49 20 MHz SMD 115mm x 47mm 50 ppm 18 pF 20 ppm ABLS Series - Tape and Reel (Alt: ABLS-20.000MHZ-B2-T) RoHS : Compliant | 1,000 | |||
| B72210S200K101 | TDK Corporation | TVS Varistor 20 VAC 26 VDC StandarD B722 65 V Disc Radial Leaded 10 mm (Alt: B72210S0200K101) RoHS : Compliant | 500 | |||
| B72214S200K551 | TDK Corporation | TVS Varistor 20 VAC 26 VDC StandarD B722 65 V Disc Radial Leaded 14 mm (Alt: B72214S0200K551) RoHS : Compliant | 0 | |||
| MDS-200APB36 AA | Eltek | (Alt: MDS-200APB36 AA) RoHS : Compliant | 0 | |||
![]() Avnet Asia | NCS20071XV53T2G | onsemi | (Alt: NCS20071XV53T2G) RoHS : Compliant | 40,000 | ||
| NCS20071SN2T1G | onsemi | (Alt: NCS20071SN2T1G) RoHS : Compliant |
| 15,000 | ||
| NCS20061MUTAG | onsemi | (Alt: NCS20061MUTAG) RoHS : Compliant |
| 3,000 | ||
| FP2-S200-R | Eaton Corporation | (Alt: FP2-S200-R) RoHS : Compliant | 0 | |||
| ECS-200-CDX-0727 | ECS International Inc | (Alt: ECS-200-CDX-0727) RoHS : Compliant | 0 | |||
| WN3S30S200CTQ | WeEn Semiconductor Co Ltd | (Alt: WN3S30S200CTQ) RoHS : Compliant | 0 | |||
| NCS20032DMR2G | onsemi | Operational Amplifier, High Slew Rate, Low Voltage, Rail-to-Rail Output ONSSPCAPLFRS; (Alt: NCS20032DMR2G) RoHS : Compliant | 0 | |||
| NCS2005SN1T1G | onsemi | Operational Amplifier, Low Power, 8 MHz GBW, Rail-to-Rail Input-Output ONSSPCAPLFRS; (Alt: NCS2005SN1T1G) RoHS : Compliant | 0 | |||
| ECS-200-20-28AX-TR | ECS International Inc | Crystal 20MHz 20pF 4-Pin SMD T/R (Alt: ECS-200-20-28AX-TR) RoHS : Compliant |
| 0 | ||
| SNV3S/2000G | Kingston Technology Company | SSD, Internal, M.2 2280, PCI Express 4.0 (x4), NVMe, 2 TB, 3D NAND (Alt: SNV3S/2000G) RoHS : Compliant | 0 | |||
| SCY99250CFCS200265T2G | onsemi | LDO Regulator Pos 2/2.65V 200mA 4-Pin WLCSP T/R (Alt: SCY99250CFCS200265T2G) RoHS : Compliant | 0 | |||
| NCS2003SN2T1G | onsemi | Operational Amplifier, High Slew Rate, Low Voltage, Rail-to-Rail Output ONSSPCAPLFRS; (Alt: NCS2003SN2T1G) RoHS : Compliant | 0 | |||
| NCS2004MUTAG | onsemi | Operational Amplifier, High Slew Rate, Rail to Rail Output ONSSPCAPLFRS; (Alt: NCS2004MUTAG) RoHS : Compliant | 0 | |||
| 49S20.0000-20GHE-E | Diodes Incorporated | Crystal 20MHz 20pF 2-Pin DIP (Alt: 49S20.0000-20GHE-E) RoHS : Compliant | 0 | |||
| ASWD-S2-0008 | Abracon Corporation | RF SWITCH SPDT 800MHZ TO 6000MHZ 3.3V 6- (Alt: ASWD-S2-0008) RoHS : Compliant | 0 | |||
![]() Avnet Silica | STPS4S200S | STMicroelectronics | Diode Schottky 200V 4A 2Pin DO214AB TR (Alt: STPS4S200S) RoHS : Compliant | 7,052,500 | ||
| STPS4S200B-TR | STMicroelectronics | Schottky Rectifier 200 V 4 A Single TO252 DPAK 2 Pins 870 mV (Alt: STPS4S200B-TR) RoHS : Compliant | 1,687,500 | |||
| NCS20071SN2T1G | onsemi | (Alt: NCS20071SN2T1G) RoHS : Compliant | 18,000 | |||
ZLLS2000TA![]() | Diodes Incorporated | (Alt: ZLLS2000TA) RoHS : Compliant | 9,000 | |||
| NCS20081SN3T1G | onsemi | (Alt: NCS20081SN3T1G) RoHS : Compliant | 6,000 | |||
| ZLLS2000QTA | Diodes Incorporated | (Alt: ZLLS2000QTA) RoHS : Compliant | 3,000 | |||
| NCS20061SN2T1G | onsemi | (Alt: NCS20061SN2T1G) RoHS : Compliant | 3,000 | |||
| SIT1618BE-11-XXS-20.000000E | SiTime Corporation | (Alt: SIT1618BE-11-XXS-20.000000E) RoHS : Compliant | 3,000 | |||
STPS200170TV1![]() | STMicroelectronics | Diode Module 170 V 200 A 630 mV Dual Isolated ISOTOP 4 Pins (Alt: STPS200170TV1) RoHS : Compliant | 2,580 | |||
HCS200/P![]() | Microchip Technology Inc | Hopping Decoder 8Pin PDIP (Alt: HCS200/P) RoHS : Compliant | 0 | |||
CS2000CP-CZZ![]() | Cirrus Logic | Programmable PLL Frequency Synthesizer Dual 10Pin MSOP Rail (Alt: CS2000CP-CZZ) RoHS : Compliant | 0 | |||
| NCS20032DMR2G | onsemi | Operational Amplifier High Slew Rate Low Voltage RailtoRail Output ONSSPCAPLFRS (Alt: NCS20032DMR2G) RoHS : Compliant | 0 | |||
| NCS2005SN1T1G | onsemi | Operational Amplifier Low Power 8 MHz GBW RailtoRail InputOutput ONSSPCAPLFRS (Alt: NCS2005SN1T1G) RoHS : Compliant | 0 | |||
| BD9S200MUF-CE2 | ROHM Semiconductor | (Alt: BD9S200MUF-CE2) RoHS : Compliant | 0 | |||
| NCS20091SN2T1G | onsemi | (Alt: NCS20091SN2T1G) RoHS : Compliant | 0 | |||
![]() Braemac Americas-Symmetry | ABLS-20.000MHZ-B-4-Y-T![]() | Abracon Corporation | CRYSTAL 20.0000MHZ 18PF SMD RoHS : Compliant |
| 0 | |
| AMMLPDBLRS-20.0000T | Abracon Corporation |
| 0 | |||
| AMMLPVAVCS-20.0000T | Abracon Corporation |
| 0 | |||
ABLS-20.000MHZ-16-A-4-H-T![]() | Abracon Corporation | CRYSTAL 20.0000MHZ 16PF SMD RoHS : Compliant |
| 0 | ||
| AMMLPABLCS-20.0000T | Abracon Corporation |
| 0 | |||
| AMMLPDBLJS-20.0000T | Abracon Corporation |
| 0 | |||
| AMMLPVBXJS-20.0000T | Abracon Corporation |
| 0 | |||
| AMMLPABXRS-20.0000T | Abracon Corporation |
| 0 | |||
| AMMLPDALRS-20.0000T | Abracon Corporation |
| 0 | |||
| AMMLPDBXCS-20.0000T | Abracon Corporation |
| 0 | |||
| AMMLPEBXJS-20.0000T | Abracon Corporation |
| 0 | |||
| AMMLPAAXJS-20.0000T | Abracon Corporation |
| 0 | |||
| AMMLPDAXCS-20.0000T | Abracon Corporation |
| 0 | |||
| AMMLPFLBLJS-20.0000T | Abracon Corporation |
| 0 | |||
| ASWD-S2-0008-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
![]() DB Roberts | AD63-66BS2001 | Pop Rivets | ALUM OPEN END RIVET | 0 | ||
| AD66ALS2001 | Pop Rivets | 3/16 ALUM OPEN END LS RIVET | 0 | |||
| AD616BS200 | Pop Rivets | ALUM OPEN END RIVET | 0 | |||
| DSI-4254S200-35 | Sugatsune Kogyo Co Ltd | 0 | ||||
| SD62BS200 | Pop Rivets | STEEL OPEN END RIVET | 0 | |||
| DMS2000-1A | Essentra Components | 2.000IN ID 1.00IN LENGTHSOFT R | 0 | |||
| DSI-4254S200-45 | Sugatsune Kogyo Co Ltd | SS HANDLE H200, W45, D50 | 0 | |||
| LCBS-20-01 | Essentra Components | CB SptDual LckNatural1-1/4 in Spc CB Spt Dual Lock Natural | 0 | |||
| SSD66SSBS200 | Pop Rivets | STAINLESS OPEN END RIVET | 0 | |||
| ECS2000A | Essentra Components | FLANGED CAP - NPT THREADLDPE N | 0 | |||
| DMS2000-1/2A | Essentra Components | 2.000IN ID .500IN LENGTHSOFT R | 0 | |||
| SD614BS200 | Pop Rivets | STEEL OPEN END RIVET | 0 | |||
| SD64BS200 | Pop Rivets | STEEL OPEN END RIVET | 0 | |||
| CA-3118S-200 | SHEREX FASTENING SO | 0 | ||||
| XL-US01-S200 | Sugatsune Kogyo Co Ltd | SHELF CLAMPFOR GLASS SHELF | 0 | |||
![]() EBV Elektronik | NCS20082DR2G | onsemi | (Alt: NCS20082DR2G) RoHS : Compliant | 7,500 | ||
TS2007EIJT![]() | STMicroelectronics | Audio Power Amplifier Mono 1 Channel 3W x 1 4Ohm 24 V to 55 V 9 Pins FlipChip (Alt: TS2007EIJT) RoHS : Compliant | 5,000 | |||
| NCS2005SN1T1G | onsemi | Operational Amplifier Low Power 8 MHz GBW RailtoRail InputOutput ONSSPCAPLFRS (Alt: NCS2005SN1T1G) RoHS : Compliant | 3,000 | |||
| IRS2005MTRPBF | Infineon Technologies AG | IGBTMOSFET Driver 2 Channels High Side and Low Side 600 mA 10 V to 20 V 150 ns 14 Pins MLPQ (Alt: SP001534270) RoHS : Compliant | 3,000 | |||
| NCS20034DR2G | onsemi | Quad OpAmp 7 MHz High Slew Rate RailtoRail Output ONSSPCAPLFRS (Alt: NCS20034DR2G) RoHS : Compliant | 2,500 | |||
| STPS4S200B-TR | STMicroelectronics | Schottky Rectifier 200 V 4 A Single TO252 DPAK 2 Pins 870 mV (Alt: STPS4S200B-TR) RoHS : Compliant | 2,500 | |||
| BXRE-30S2001-C-73 | Bridgelux Inc | COB LED Warm White 630 mA 95 CRI 14 mm 120 2520 lm 217 W 3000 K 344V Round Flat Top (Alt: BXRE-30S2001-C-73) RoHS : Compliant | 975 | |||
| BXRE-35S2001-C-73 | Bridgelux Inc | LED COB Warm White 3500K 1260mA Tube (Alt: BXRE-35S2001-C-73) RoHS : Compliant | 375 | |||
| BXRE-57S2001-C-73 | Bridgelux Inc | COB LED Cool White 630 mA 95 CRI 14 mm 120 2810 lm 217 W 5700 K 344V Round Flat Top (Alt: BXRE-57S2001-C-73) RoHS : Compliant | 350 | |||
| BXRE-65S2001-C-74 | Bridgelux Inc | LED COB Cool White 6500K 1260mA Tube (Alt: BXRE-65S2001-C-74) RoHS : Compliant | 300 | |||
| BXRE-27S2001-C-73 | Bridgelux Inc | COB LED Warm White 630 mA 95 CRI 14 mm 120 2330 lm 217 W 2700 K 344V Round Flat Top (Alt: BXRE-27S2001-C-73) RoHS : Compliant | 250 | |||
| BXRE-40S2001-C-73 | Bridgelux Inc | LED COB Neutral White 4000K 1260mA Tube (Alt: BXRE-40S2001-C-73) RoHS : Compliant | 200 | |||
| BXRE-57S2001-C-74 | Bridgelux Inc | LED COB Cool White 5700K 1260mA Tube (Alt: BXRE-57S2001-C-74) RoHS : Compliant | 100 | |||
| BXRE-50S2001-C-74 | Bridgelux Inc | LED COB Neutral White 5000K 1260mA Tube (Alt: BXRE-50S2001-C-74) RoHS : Compliant | 25 | |||
| FS200R12N3T7BPSA1 | Infineon Technologies AG | IGBT Module Six Pack 200 A 155 V 175 C Module (Alt: SP005337556) RoHS : Compliant | 0 | |||
![]() ECCO | EPS-2001/2INBL48INB | 3M |
| 1,290 | ||
| EPS-2003/4INBL48INB | 3M |
| 48 | |||
![]() Flip Electronics | NCS2002SN2T1G![]() | onsemi | Stock, Ship Today RoHS : Compliant | 90,000 | ||
| NCS20082DTBR2G | onsemi | Stock, Ship Today RoHS : Compliant | 67,500 | |||
| NCS20061SN3T1G | onsemi | Stock, Ship Today RoHS : Compliant | 51,000 | |||
| NCS20032DMR2G | onsemi | Stock, Ship Today RoHS : Compliant | 50,953 | |||
| NCS20091SN2T1G | onsemi | Stock, Ship Today RoHS : Compliant | 38,010 | |||
| NCS20091SN3T1G | onsemi | Stock, Ship Today RoHS : Compliant | 35,756 | |||
| NCS2005SN1T1G | onsemi | Stock, Ship Today RoHS : Compliant | 18,000 | |||
| NCS20032DR2G | onsemi | Stock, Ship Today RoHS : Compliant | 6,836 | |||
| NCS20071XV53T2G | onsemi | Stock, Ship Today RoHS : Compliant | 6,412 | |||
| NCS20034DR2G | onsemi | Stock, Ship Today RoHS : Compliant | 3,221 | |||
| MRF6S20010NR1 | NXP Semiconductors | Stock, Ship Today RoHS : Compliant | 2,690 | |||
| NCS20091MUTAG | onsemi | Stock, Ship Today RoHS : Compliant | 1,450 | |||
| BLP8G05S-200Y | Flip Electronics Manufacturing Services | Stock, Ship Today | 1,333 | |||
| BLF7G20LS-200,112 | Flip Electronics Manufacturing Services | Stock, Ship Today | 328 | |||
| BLS7G3135LS-200U | Flip Electronics Manufacturing Services | Stock, Ship Today | 54 | |||
![]() Maritex | JS-2001-TP | Chyao Shiunn Electronic Industrial Ltd | Metal terminal; female; for HG-T-LF housings; for cable AWG#22-28; 250V/3A |
| 119,360 | |
| JS-2001-02 | Chyao Shiunn Electronic Industrial Ltd | Crimp terminal housing; pitch 2.50mm; 2-contacts; female; applicable wire AWG#22-28; 250V/3A |
| 27,291 | ||
| JS-2000H-TH | Chyao Shiunn Electronic Industrial Ltd | Metal terminal; male; for PWM housings; for cable AWG#14-18 |
| 24,675 | ||
| JS-2001-03 | Chyao Shiunn Electronic Industrial Ltd | Crimp terminal housing; pitch 2.50mm; 3-contacts; female; applicable wire AWG#22-28; 250V/3A |
| 12,155 | ||
| JS-2000W-02 | Chyao Shiunn Electronic Industrial Ltd | Crimp terminal housing; pitch 6.20mm; 2-contacts; female; applicable wire AWG#14-22; 300V/9A |
| 5,100 | ||
SL2S2002FTB,115![]() | NXP Semiconductors | NFC/RFID ICs; SL2S2002FTB,115; NXP SEMICONDUCTORS; 13.56 MHz; Tape & Reel (TR); 3 RoHS : Compliant |
| 2,185 | ||
| JS-2001-10 | Chyao Shiunn Electronic Industrial Ltd | Crimp terminal housing; pitch 2.50mm; 10-contacts; female; applicable wire AWG#22-28; 250V/3A |
| 1,938 | ||
| JS-2001-05 | Chyao Shiunn Electronic Industrial Ltd | Crimp terminal housing; pitch 2.50mm; 5-contacts; female; applicable wire AWG#22-28; 250V/3A RoHS : Compliant |
| 1,657 | ||
| JS-2001-11 | Chyao Shiunn Electronic Industrial Ltd | Crimp terminal housing; pitch 2.50mm; 11-contacts; female; applicable wire AWG#22-28; 250V/3A |
| 1,000 | ||
| JS-2000W-04 | Chyao Shiunn Electronic Industrial Ltd | Crimp terminal housing; pitch 6.20mm; 4-contacts; female; applicable wire AWG#14-22; 300V/9A |
| 892 | ||
| JS-2000H-04E | Chyao Shiunn Electronic Industrial Ltd | Crimp terminal housing; pitch 6.20mm; 4-contacts; male; applicable wire AWG#14-22; 300V/9-15A |
| 710 | ||
| JS-2000W-3X5 | Chyao Shiunn Electronic Industrial Ltd | Crimp terminal housing; pitch 6.20mm; 15-contacts [3x5]; female; 3 rows; applicable wire AWG#14-22; 300V/9A |
| 433 | ||
| JS-2000W-3X3 | Chyao Shiunn Electronic Industrial Ltd | Crimp terminal housing; pitch 6.20mm; 9-contacts [3x3]; female; 3 rows; applicable wire AWG#14-22; 300V/9A |
| 250 | ||
| RPS-200-24 | Mean Well | Power Supply; medical; 201.6W; 24V; 8.4A; 80-264VAC; 113-370VDC RoHS : Compliant |
| 219 | ||
| JS-2000H-03E | Chyao Shiunn Electronic Industrial Ltd | Crimp terminal housing; pitch 6.20mm; 3-contacts; male; applicable wire AWG#14-22; 300V/9-15A |
| 12 | ||
![]() Master Electronics | BRE.0S.200.NAV | LEMO connectors | LEMO Dust Cap for 0B/0S Size and Series Nickel-Plated Brass RoHS : Compliant |
| 0 | |
| BRS200-120RJ8 | Bourns Inc | Braking Resistor - 120 ohm 5% - 200W - Chassis Mount RoHS : Compliant |
| 0 | ||
| HC-1KS2000 | Phoenix Contact | HC-1KS2000 RoHS : Compliant |
| 0 | ||
| HCMD-08-S-20.00-02-G-ST2 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HCMD-08-S-20.00-02-ST8-RW | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HCMD-20-S-20.00-02 | Samtec Inc | RoHS : Compliant |
| 0 | ||
HCS200/P![]() | Microchip Technology Inc | KeeLoq® Code Hopping Decoder - 5V/9V/12V - 8-Pin PDIP - Tube RoHS : Compliant |
| 0 | ||
| HCSD-04-S-20.00-01-N | Samtec Inc | .100 Double Row IDC Ribbon Cable Assembly Socket RoHS : Compliant |
| 0 | ||
| HCSD-17-S-20.00-01-T-G-RW | Samtec Inc | Cable Assembly Ribbon 0.508m 34 POS IDC RCP RoHS : Compliant |
| 0 | ||
| HDWM-02-53-G-S-200 | Samtec Inc | Conn Board Stacker HDR 2 POS 5.08mm Stack Height 1.27mm Solder ST Through Hole RoHS : Compliant |
| 0 | ||
| HDWM-04-51-S-S-200 | Samtec Inc | Conn Board Stacker HDR 4 POS 1.27mm Solder ST Thru-Hole RoHS : Compliant |
| 0 | ||
| HDWM-04-59-G-S-200 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HDWM-05-51-T-S-200 | Samtec Inc | Conn Board Stacker HDR 5 POS 1.27mm Solder ST Thru-Hole RoHS : Compliant |
| 0 | ||
| HDWM-06-52-L-S-200 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| HDWM-07-01-G-S-200 | Samtec Inc | .050 X .100 Flex Stack High-Temp Micro Board Stacker RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3W17014/HS-200CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-FR, RF Cable Type: LMR-100A-FR, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. Fire Rated SMA Male to SMA Male Low Loss Cable 200 CM Length Using LMR-100-FR Coax with HeatShrink., Radio frequency assembly fire rated SMA male to SMA male low loss cable 200 cm length using LMR-100-FR coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated SMA male to SMA male low loss cable 200 cm length using LMR-100-FR coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a SMA cable connection on the other. Our low loss SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W17014/HS-200CM can also be known as a low loss SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W17014/HS-200CM RF cable has a FRPE jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE3W17014/HS-200CM is built with LMR-100A-FR which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 831 | |
| PE3W05697/HS-200CM | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length: 78.74 inches. SMA Female Bulkhead to SMP Female Right Angle Cable 200 cm Length Using RG178 Coax with HeatShrink., Radio frequency assembly SMA female bulkhead to SMP female right angle cable 200 cm length using RG178 coax with heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female bulkhead to SMP female right angle cable 200 cm length using RG178 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA bulkhead cable connection on one end and right angle SMP cable connection on the other. Our SMA to right angle SMP cable assemblies have a female gender on end 1 and female on end 2. This SMA to SMP cable is a female to female coax assembly, PE3W05697/HS-200CM, can also be known as a SMA jack to right angle SMP jack cable assembly and will be shipped same-day as it is purchased. SMA jack to SMP jack cable assembly PE3W05697/HS-200CM is built with RG178 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMP cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SMA female bulkhead to SMP right angle female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W05697/HS-200CM can also be used in the other direction and will be right angle SMP female to SMA female bulkhead cable assembly if the opposite connectivity is required. SMA jack bulkhead to SMP right angle jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMP cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female bulkhead to SMP female right angle cable 200 cm length using RG178 coax with heatshrink. |
| 333 | ||
| PE3C1754LF/HS-200CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: LMR-200-UF, RF Cable Type: LMR-200-UF, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. SMA Male to SMA Male Low Loss Cable 200 cm Length Using LMR-200-UF Coax With Times Microwave Components with HeatShrink, LF Solder., Radio frequency assembly SMA male to SMA male low loss cable 200 cm length using LMR-200-UF coax with Times Microwave components with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA male low loss cable 200 cm length using LMR-200-UF coax with Times Microwave components with heatshrink, LF solder, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our low loss SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3C1754LF/HS-200CM can also be known as a low loss SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3C1754LF/HS-200CM is built with LMR-200-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male low loss cable 200 cm length using LMR-200-UF coax with Times Microwave components with heatshrink, LF solder. |
| 242 | ||
| PE3994/HS-200CM | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm, Length: 78.74 inches. BNC Female Bulkhead to BNC Male Right Angle Cable 200 cm Length Using RG188 Coax with HeatShrink., Radio frequency assembly BNC female bulkhead to BNC male right angle cable 200 cm length using RG188 coax with heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC female bulkhead to BNC male right angle cable 200 cm length using RG188 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC bulkhead cable connection on one end and right angle BNC cable connection on the other. Our BNC to right angle BNC cable assemblies have a female gender on end 1 and male on end 2. This BNC to BNC cable is a female to male coax assembly, PE3994/HS-200CM, can also be known as a BNC jack to right angle BNC plug cable assembly and will be shipped same-day as it is purchased. BNC jack to BNC plug cable assembly PE3994/HS-200CM is built with RG188 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to right angle BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 2 GHz maximum frequency BNC female bulkhead to BNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3994/HS-200CM can also be used in the other direction and will be right angle BNC male to BNC female bulkhead cable assembly if the opposite connectivity is required. BNC jack bulkhead to BNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC female bulkhead to BNC male right angle cable 200 cm length using RG188 coax with heatshrink. |
| 209 | ||
| PE3C8654/HS-200CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 4.3-10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: SPF-250, RF Cable Type: SPF-250, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. Fire Rated 4.3-10 Male to 4.3-10 Male Low PIM Cable 200 cm Length Using SPF-250 Coax with HeatShrink., Radio frequency assembly fire rated 4.3-10 male to 4.3-10 male low PIM cable 200 cm length using SPF-250 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Fire rated 4.3-10 male to 4.3-10 male low PIM cable 200 cm length using SPF-250 coax with heatshrink, 4.3-10 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.3-10 to 4.3-10 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.3-10 cable connection on one end and 4.3-10 cable connection on the other. Our low PIM 4.3-10 to 4.3-10 cable assemblies have a male gender on end 1 and male on end 2. PE3C8654/HS-200CM can also be known as a low PIM 4.3-10 plug to 4.3-10 plug cable assembly and will be shipped same-day as it is purchased. 4.3-10 plug to 4.3-10 plug cable assembly PE3C8654/HS-200CM is built with SPF-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 4.3-10 cable assembly is manufactured with 4.3-10 to 4.3-10 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 4.3-10 male to 4.3-10 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low PIM 4.3-10 plug to 4.3-10 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this fire rated 4.3-10 male to 4.3-10 male low PIM cable 200 cm length using SPF-250 coax with heatshrink. |
| 78 | ||
| PE71S2009 | Pasternack Enterprises | Key Specifications, Connector Series: SMA, Connector Gender: Female, Switch Design: Reflective, Minimum Frequency: 70 MHz, Maximum Frequency: 26.5 GHz, Impedance: 50 Ohm, Maximum Input Power: 0.5 Watts, Maximum Insertion Loss: 3.5 dB, Minimum Isolation: 30 dB. SPDT PIN Diode Switch Operating From 70 MHz to 26.5 GHz Up to +27 dBm and SMA. PE71S2009 PIN diode switch from Pasternack is a Reflective design. Our RF Reflective PIN diode switch uses SMA connectors at 50 Ohm. This SMA PIN diode Reflective switch has a minimum frequency of 70 MHz and a maximum frequency of 26.5 GHz. The Pasternack PIN diode Reflective RF switch is rated at a switching speed of 100 ns and a maximum input power of 0.5 Watts (+27 dBm ). Insertion loss maximum of this SMA Reflective switch is 3.5 dB with an isolation minimum of 30 dB. Reflective PIN diode radio frequency switch PE71S2009 is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. Our Reflective SMA coaxial PIN diode switch can ship worldwide the same day that it is bought as with our other available RF parts. |
| 1 | ||
| PE3C10163/HS-200CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: SSMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SSMC, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. SSMA Male to SSMC Plug Low Loss Cable 200 CM Length Using LMR-100A-UF Coax with HeatShrink., Radio frequency assembly SSMA male to SSMC plug low loss cable 200 cm length using LMR-100A-UF coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SSMA male to SSMC plug low loss cable 200 cm length using LMR-100A-UF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SSMA to SSMC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SSMA cable connection on one end and a SSMC cable connection on the other. Our low loss SSMA to SSMC cable assembly has a male gender on end 1 and a plug on end 2. PE3C10163/HS-200CM can also be known as a low loss SSMA plug to SSMC male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10163/HS-200CM RF cable has a TPE jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our SSMA male to SSMC plug cable has a maximum VSWR of 1.4:1. SSMA plug to SSMC male cable assembly PE3C10163/HS-200CM is built with LMR-100A-UF which is a flexible coax type. The Pasternack flexible SSMA cable assembly is manufactured with SSMA to SSMC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C10163/HS-200CM can also be used in the other direction and will be a SSMC plug to SSMA male cable assembly if the opposite connectivity is required. Low loss SSMA plug to SSMC male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SSMA to SSMC cable assembly for quick shipment worldwide. Variations of SSMA and SSMC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SSMA to SSMC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C2478/HS-200CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. BNC Male to SMA Male Low Loss Cable 200 cm Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly BNC male to SMA male low loss cable 200 cm length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male to SMA male low loss cable 200 cm length using LMR-100 coax with heatshrink, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with BNC cable connection on one end and SMA cable connection on the other. Our low loss BNC to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3C2478/HS-200CM can also be known as a low loss BNC plug to SMA plug cable assembly and will be shipped same-day as it is purchased. BNC plug to SMA plug cable assembly PE3C2478/HS-200CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this BNC male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2478/HS-200CM can also be used in the other direction and will be SMA male to BNC male cable assembly if the opposite connectivity is required. Low loss BNC plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to SMA cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to SMA male low loss cable 200 cm length using LMR-100 coax with heatshrink. |
| 0 | ||
| PE3C8634LF/HS-200CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. SMA Male to SMA Male Low Loss Cable 200 CM Length Using LMR-100A-UF Coax with HeatShrink, LF Solder., Radio frequency assembly SMA male to SMA male low loss cable 200 cm length using LMR-100A-UF coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA male low loss cable 200 cm length using LMR-100A-UF coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a SMA cable connection on the other. Our low loss SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3C8634LF/HS-200CM can also be known as a low loss SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C8634LF/HS-200CM RF cable has a TPE jacket of 0.110-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE3C8634LF/HS-200CM is built with LMR-100A-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W06083/HS-200CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Female to Push-On SMP Female Right Angle Low Loss Cable 200 cm Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly reverse polarity SMA female to push-on SMP female right angle low loss cable 200 cm length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Reverse polarity SMA female to push-on SMP female right angle low loss cable 200 cm length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMP cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with reverse polarity SMA cable connection on one end and right angle SMP cable connection on the other. Our low loss reverse polarity SMA to right angle SMP cable assemblies have a female gender on end 1 and female on end 2. PE3W06083/HS-200CM can also be known as a low loss reverse polarity SMA jack to right angle SMP jack cable assembly and will be shipped same-day as it is purchased. Reverse polarity SMA jack to SMP jack cable assembly PE3W06083/HS-200CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with SMA to right angle SMP cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this reverse polarity SMA female to SMP right angle female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W06083/HS-200CM can also be used in the other direction and will be right angle SMP female to reverse polarity SMA female cable assembly if the opposite connectivity is required. Low loss SMA reverse polarity jack to SMP right angle jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMP cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity SMA female to push-on SMP female right angle low loss cable 200 cm length using LMR-100 coax with heatshrink. |
| 0 | ||
| PE3W04917/HS-200CM | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: FAKRA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C100-LSZH, RF Cable Type: PE-C100-LSZH, RF Cable Impedance: 50 Ohm, Length: 78.74 inches. SMA Female Bulkhead to Water Blue FAKRA Jack Cable 200 cm Length Using PE-C100-LSZH Coax with HeatShrink., Radio frequency assembly SMA female bulkhead to water blue FAKRA jack cable 200 cm length using PE-C100-LSZH coax with heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female bulkhead to water blue FAKRA jack cable 200 cm length using PE-C100-LSZH coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to FAKRA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA bulkhead cable connection on one end and FAKRA cable connection on the other. Our SMA to FAKRA cable assemblies have a female gender on end 1 and jack on end 2. This SMA to FAKRA cable is a female to jack coax assembly, PE3W04917/HS-200CM, can also be known as a SMA jack to FAKRA female cable assembly and will be shipped same-day as it is purchased. SMA jack to FAKRA female cable assembly PE3W04917/HS-200CM is built with PE-C100-LSZH which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to FAKRA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency SMA female bulkhead to FAKRA jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W04917/HS-200CM can also be used in the other direction and will be FAKRA jack to SMA female bulkhead cable assembly if the opposite connectivity is required. SMA jack bulkhead to FAKRA female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to FAKRA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female bulkhead to water blue FAKRA jack cable 200 cm length using PE-C100-LSZH coax with heatshrink. |
| 0 | ||
| PE3C2645LF/HS-200CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. SMB Plug Right Angle to N Male Low Loss Cable 200 CM Length Using LMR-100 Coax with HeatShrink, LF Solder., Radio frequency assembly SMB plug right angle to N male low loss cable 200 cm length using LMR-100 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMB plug right angle to N male low loss cable 200 cm length using LMR-100 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMB to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMB cable connection on one end and a type N cable connection on the other. Our low loss right angle SMB to type N cable assembly has a plug gender on end 1 and a male on end 2. PE3C2645LF/HS-200CM can also be known as a low loss right angle SMB male to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C2645LF/HS-200CM RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our right angle SMB plug to type N male cable has a maximum VSWR of 1.4:1. SMB male to type N plug cable assembly PE3C2645LF/HS-200CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with right angle SMB to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C2645LF/HS-200CM can also be used in the other direction and will be a type N male to right angle SMB plug cable assembly if the opposite connectivity is required. Low loss SMB right angle male to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMB to type N cable assembly for quick shipment worldwide. Variations of SMB and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMB to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W02685LF/HS-200CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. SMA Male to SMA Male Low Loss Cable 200 cm Length Using LMR-100 Coax with HeatShrink, LF Solder., Radio frequency assembly SMA male to SMA male low loss cable 200 cm length using LMR-100 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA male low loss cable 200 cm length using LMR-100 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our low loss SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3W02685LF/HS-200CM can also be known as a low loss SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3W02685LF/HS-200CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male low loss cable 200 cm length using LMR-100 coax with heatshrink, LF solder. |
| 0 | ||
| PE3W06302/HS-200CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: MCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. MCX Plug to N Female Low Loss Cable 200 cm Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly MCX plug to N female low loss cable 200 cm length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The MCX plug to N female low loss cable 200 cm length using LMR-100 coax with heatshrink, MCX cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MCX to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with MCX cable connection on one end and type N cable connection on the other. Our low loss MCX to N type cable assemblies have a plug gender on end 1 and female on end 2. PE3W06302/HS-200CM can also be known as a low loss MCX male to N type jack cable assembly and will be shipped same-day as it is purchased. MCX male to type N jack cable assembly PE3W06302/HS-200CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible MCX cable assembly is manufactured with MCX to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this MCX plug to type N female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W06302/HS-200CM can also be used in the other direction and will be N type female to MCX plug cable assembly if the opposite connectivity is required. Low loss MCX male to type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MCX to type N cable assembly for quick shipment worldwide. Variations of MCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MCX plug to N female low loss cable 200 cm length using LMR-100 coax with heatshrink. |
| 0 | ||
| PE3W18543/HS-200CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: FAKRA, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. BNC Male to Water Blue FAKRA Jack Low Loss Cable 200 CM Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly BNC male to water blue FAKRA jack low loss cable 200 cm length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male to water blue FAKRA jack low loss cable 200 cm length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to FAKRA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a BNC cable connection on one end and a FAKRA cable connection on the other. Our low loss BNC to FAKRA cable assembly has a male gender on end 1 and a jack on end 2. PE3W18543/HS-200CM can also be known as a low loss BNC plug to FAKRA female cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W18543/HS-200CM RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our BNC male to FAKRA jack cable has a maximum VSWR of 1.4:1. BNC plug to FAKRA female cable assembly PE3W18543/HS-200CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to FAKRA cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the clamp/solder attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W18543/HS-200CM can also be used in the other direction and will be a FAKRA jack to BNC male cable assembly if the opposite connectivity is required. Low loss BNC plug to FAKRA female cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to FAKRA cable assembly for quick shipment worldwide. Variations of BNC and FAKRA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to FAKRA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
![]() Sager | GP2500S20-0.125-02-0816 | Henkel AG & Co KGaA | Thermal Interface Products GAP PAD, S-Class, 8x16 Sheet, 0.125 Thickness, GAP PAD TGP2400/2500S20 |
| 63 | |
| LRS-200N2-24 | Mean Well | Switching Power Supplies 211.2W 24V 8.8A 200% Peak Power RoHS : Compliant |
| 20 | ||
| HCKS200D030V440850Z | Hartland Controls / Littelfuse | 25+3MFD 370/440V OVAL RUN CAPACITOR |
| 20 | ||
| MS200/MS200 | Eaton Bussmann | Circuit Breaker Accessories TWIN 200A PMP RPLCMENT SWITCHE-ACB | 0 | |||
| BRE.0S.200.NAV | LEMO connectors | Circular Push Pull Connectors RoHS : Compliant |
| 0 | ||
| BRR.0S.200.PZVN | LEMO connectors | Circular MIL Spec Tools, Hardware & Accessories RoHS : Compliant |
| 0 | ||
| CC3331-00-S200 | General Devices | General Devices | 0 | |||
| HCMD-08-S-20.00-01-G-ST3-RW | Samtec Inc | Ribbon Cables / IDC Cables RoHS : Compliant | 0 | |||
| HCMD-08-S-20.00-02-G-ST2 | Samtec Inc | Ribbon Cables / IDC Cables RoHS : Compliant | 0 | |||
| HCMD-08-S-20.00-02-G-ST8-RW | Samtec Inc | Ribbon Cables / IDC Cables RoHS : Compliant | 0 | |||
| HCMD-08-S-20.00-02-ST8-RW | Samtec Inc | Ribbon Cables / IDC Cables RoHS : Compliant | 0 | |||
| HCSD-04-S-20.00-01-N | Samtec Inc | Ribbon Cables / IDC Cables RoHS : Compliant | 0 | |||
| HCSD-17-S-20.00-01-T-G-RW | Samtec Inc | Ribbon Cables / IDC Cables RoHS : Compliant | 0 | |||
| HDWM-02-53-G-S-200 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| HDWM-04-51-S-S-200 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
![]() TE Connectivity | ES-2002-T311-020E | TE Connectivity | Emergency Switch ES-2002-T311-020E Push Button Switch Product Type: Emergency Stop Switch Illuminated: Without Operating Function: Maintained Configuration (Pole-Throw): Double Pole - Double Throw Number of Actuators: Single Emergency Stop Switch Without Maintained Double Pole - Double Throw | Emergency Stop Switch & 1 Actuator & Flush & Threaded Bushing | Part Number: ES-2002-T311-020E | Internal Number: K1157667 | Emergency Switch ES-2002-T311-020E Push Button Switch Product Type: Emergency Stop Switch Illuminated: Without Operating Function: Maintained Configuration (Pole-Throw): Double Pole - Double Throw Number of Actuators: Single Emergency Stop Switch Without Maintained Double Pole - Double Throw | Emergency Stop Switch & 1 Actuator & Flush & Threaded Bushing | Part# ES-2002-T311-020E RoHS : Compliant |
| 35 | |
![]() Vyrian | CBS2004812-F1 | Cosel USA Inc | DC-DC Regulated Power Supply Module RoHS : Compliant | 18,100 | ||
| CBS2002403 | Cosel USA Inc | DC-DC Regulated Power Supply Module, 1 Output, 115.5W, Hybrid RoHS : Compliant | 15,587 | |||
| FS200R07A02E3S6BKSA2 | Infineon Technologies AG | Insulated Gate Bipolar Transistor, 400A I(C), 700V V(BR)CES RoHS : Compliant | 13,254 | |||
TS2007EIJT![]() | STMicroelectronics | 3W, 1 Channel(s), 1 Func, PBGA9 RoHS : Compliant | 12,131 | |||
| MAXREFDES200 | Analog Devices (Maxim Integrated) | 11,853 | ||||
| ADSP21CSP01BS200 | Analog Devices Inc | Digital Signal Processor, 16-Bit Size, CMOS, PQFP160 RoHS : Not Compliant | 10,369 | |||
| DS2009RN-80 | Analog Devices Inc | FIFO, 512X9, 80ns, Asynchronous, CMOS, PQCC32 RoHS : Not Compliant | 9,502 | |||
| TS-200-248B | Mean Well Enterprises | DC-AC Inverter Power Supply Module, 1 Output, 200W, Hybrid | 9,055 | |||
CS2000CP-CZZR![]() | Cirrus Logic | Phase Locked Loop, Hybrid, PDSO10 RoHS : Compliant | 8,019 | |||
| FS200R12KT4RB11BOSA1 | Infineon Technologies AG | Insulated Gate Bipolar Transistor, 280A I(C), 1200V V(BR)CES, N-Channel RoHS : Compliant | 6,116 | |||
| HOS200SH | Analog Devices Inc | Buffer Amplifier, 1 Func, Hybrid, MQIP12 RoHS : Not Compliant | 5,401 | |||
XC17S200AVO8C![]() | AMD Xilinx | Configuration Memory, 1335840X1, Serial, CMOS, PDSO8 RoHS : Not Compliant | 3,843 | |||
| D2-S200-S08-4FIPS | Kingston Technology Company | 3,772 | ||||
| 90KS200CH1 | Microchip Technology Inc | Trans Voltage Suppressor Diode, 90000W, 180V V(RWM), Bidirectional, 1 Element, Silicon RoHS : Not Compliant | 3,093 | |||
| HS200R82F | Arcol Uk | Fixed Resistor, Wire Wound, 200W, 0.82ohm, 1900V, 1% +/-Tol, 100ppm/Cel, Chassis Mount | 817 | |||
![]() Waytek, Inc. | FHMS200 | Littelfuse Inc | Sealed Fuseholder w/ Cover Mini 12 AWG GXL Wire 30A 32VDC 8"Tinned Dipped Wire Leads |
| 44 | |
| S2002 | Eaton Electronics | Sure Power S2002 Multi Battery Isolator 200A 1 Input 2 Out |
| 10 | ||
![]() Win Source Electronics | TPS2001DDBVR![]() | Texas Instruments | IC PWR SWITCH N-CHAN 1:1 SOT23-5 RoHS : Compliant |
| 60,637 | |
TPS2001DDBVT![]() | Texas Instruments | IC PWR SWITCH N-CHAN 1:1 SOT23-5 / Power Switch/Driver 1:1 N-Channel 2A SOT-23-5 RoHS : Compliant |
| 41,510 | ||
| NCS20072DMR2G | onsemi | IC OPAMP GP 2 CIRCUIT 8MICRO RoHS : Compliant |
| 12,000 | ||
| NCS20072DTBR2G | onsemi | IC OPAMP GP 2 CIRCUIT 8TSSOP RoHS : Compliant |
| 9,450 | ||
| IRLMS2002TRPF | Infineon Technologies AG |
| 7,030 | |||
| IRLMS2002TR | Infineon Technologies AG | Trans MOSFET N-CH Si 20V 6.5A 6-Pin TSOP T/R / Ultra Low On-Resistance | MOSFET N-CH 20V 6.5A 6-TSOP RoHS : Not Compliant |
| 6,680 | ||
STPS200170TV1![]() | STMicroelectronics | High voltage power Schottky rectifier | DIODE MODULE 170V 100A ISOTOP RoHS : Compliant |
| 6,000 | ||
CS2000CP-CZZ![]() | Cirrus Logic | IC SYNTHESIZER & CLK MULT 10MSOP RoHS : Compliant |
| 5,200 | ||
CS2000CP-CZZR![]() | Cirrus Logic | Fractional-N Clock Synthesizer & Clock Multiplier | IC CLK GEN/MULT CTRL PORT 10MSOP RoHS : Compliant |
| 4,720 | ||
| XC3S200A-4FGG320I | AMD Xilinx | IC FPGA 248 I/O 320FBGA / FPGA Spartan®-3A Family 200K Gates 4032 Cells 667MHz 90nm Technology 1.2V 320-Pin FBGA RoHS : Compliant |
| 2,999 | ||
| YFS-20-03-H-05-SB | Samtec Inc | CONN ARRAY RCPT 100POS SMD GOLD RoHS : Not Compliant |
| 2,554 | ||
XC3S200-4TQG144I![]() | AMD Xilinx | IC FPGA 97 I/O 144TQFP RoHS : Compliant |
| 2,005 | ||
DS2003TM![]() | Texas Instruments | IC DVR DARLING HI CUR/V 16-SOIC RoHS : Not Compliant |
| 1,900 | ||
XC2S200E-6PQ208C![]() | AMD Xilinx | IC FPGA 146 I/O 208QFP RoHS : Not Compliant |
| 178 | ||
| XC2S200-6FGG456C | AMD Xilinx | IC FPGA 284 I/O 456FBGA RoHS : Compliant |
| 23 | ||
![]() Wuhan P&S | NCS20072DR2G | onsemi | Dual Op Amp,Rail-to-Rail Output,3MHz RoHS : Compliant |
| 240,000 | |
NCS2001SN1T1G![]() | onsemi | 0.9V, Rail-to-Rail, Single Operational Amplifiers RoHS : Compliant |
| 33,000 | ||
| NCS20061SQ3T2G | onsemi | 3 MHz, 125 A Low Power Operational Amplifier RoHS : Compliant |
| 21,000 | ||
| NVNJWS200N031LTAG | onsemi | 30V,3.3A,N-Channel Power MOSFET, RoHS : Compliant |
| 6,000 |
| Lei ha avuto il aiuto da alldatasheet? [ DONATE ] |
Di alldatasheet | Richest di pubblicita | contatti | Privacy Policy | Collegamento alla scheda tecnica | scambio Link | Ricerca produttore All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |