S80E4JS3 Price, Reseller, Stock

Pushbutton Switches OS80 Operator Station: Key Switch; 2-Position; On-Off; 1-Color; Voltage: 12-30 V dc; Housing: Polycarbonate; IP40; Output: PNP 1 NO; Color: Red; 1 m (40 in) 5-pin M12 PVC Pigtail QD; Laser marked: Auto., Maint

1 : $821.33

VS4GSDS800D2

Corsair Electrical Connectors Inc

Corsair Value Select 4GB DDR2 SDRAM Memory Module

1 : $129.98

S804U-K15

ABB Low Voltage Products and Systems

HP Circuit Breaker, 4P, K Trip, 15A, 40 kA

1 : $665.74

S803U-K15

ABB Low Voltage Products and Systems

Circuit Breaker 3-Pole K Curve 15A 415VAC Handle Ring Terminals UL 489, 2CCS863017R0457

1 : $790.65

S804U-PVS5

ABB Low Voltage Products and Systems

Circuit Breaker; Miniature; High Performance; 4P; GFDI; B Curve; 5A; 1000VDC; Screw Term

1 : $3,041.96

OTPS80FD

ABB Low Voltage Products and Systems

Auxiliary Contact; 4TH POLE OT63-80 DR MNT

1 : $136.49

RPS 80 EEC

Lumberg Connect GmbH

DIN Rail Power Supplies 24 V DC DIN rail power supply unit

1 : $819.99

HDS800PS30

XP Power

Power Supply; AC-DC; 30V, 26.7A; 100-264V In; Enclosed; 801W; Panel; HDS800 Series
RoHS : Compliant

1 : $1,165.12

S802U-K100

ABB Low Voltage Products and Systems

Circuit Breaker 2-Pole K Curve 100A, 50kA 240/415VAC, UL 489, 2CCS862017R0637

1 : $828.74

S804S-UCK32

ABB Low Voltage Products and Systems

Circuit Breaker S500-S800 MINI S MCB S800S 4P UCK 32A

1 : $2,282.44

Pasternack Enterprises US

PE71S8034

Pasternack Enterprises

Key Specifications, Connector Series: SMT, Switch Design: SPDT, Minimum Frequency: DC, Maximum Frequency: 26.5 GHz, Impedance: 50 Ohm, Maximum VSWR: 2:1, Maximum Insertion Loss: 1.6 dB, Minimum Isolation: 40 dB. SPDT Electromechanical Relay Failsafe Switch, DC to 26.5 GHz, up to 10W, 12V, Hot Switching, SMT, 2M Lifecycles. PE71S8034 electromechanical RF relay switch from Pasternack is a SPDT switch design with latching actuator. Our SPDT electromechanical RF latching switch uses SMT connectors at 50 Ohms. This SMT RF relay SPDT switch has a maximum frequency of 26.5 GHz. The Pasternack radio frequency SPDT SMT electromechanical relay switch is rated at a control voltage of 12V. SMT SPDT electromechanical RF relay latching switch features Hot Switching with an isolation minimum of 40 dB. SPDT electromechanical relay radio frequency latching switch PE71S8034 is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. Our SPDT SMT coaxial RF relay electromechanical switch can ship worldwide the same day that it is bought as with our other available RF parts.

1 : $818.99
5 : $786.23
10 : $753.47
25 : $720.71

PE71S8030

Pasternack Enterprises

Key Specifications, Connector Series: SMT, Switch Design: SPDT, Minimum Frequency: DC, Maximum Frequency: 8 GHz, Impedance: 50 Ohm, Maximum VSWR: 1.4:1, Maximum Insertion Loss: 0.5 dB, Minimum Isolation: 40 dB. SPDT Electromechanical Relay Failsafe Switch, DC to 8 GHz, up to 70W, 12V, Hot Switching, SMT, 2M Lifecycles. PE71S8030 electromechanical RF relay switch from Pasternack is a SPDT switch design with failsafe actuator. Our SPDT electromechanical RF failsafe switch uses SMT connectors at 50 Ohms. This SMT RF relay SPDT switch has a maximum frequency of 8 GHz. The Pasternack radio frequency SPDT SMT electromechanical relay switch is rated at a control voltage of 12V. SMT SPDT electromechanical RF relay failsafe switch features Hot Switching with an isolation minimum of 40 dB. SPDT electromechanical relay radio frequency failsafe switch PE71S8030 is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. Our SPDT SMT coaxial RF relay electromechanical switch can ship worldwide the same day that it is bought as with our other available RF parts.

1 : $470.99
10 : $452.15
25 : $433.31
100 : $414.47

PE71S8015

Pasternack Enterprises

Key Specifications, Connector Series: 2.4mm, Connector Gender: Female, Switch Design: SPDT, Minimum Frequency: DC, Maximum Frequency: 53 GHz, Impedance: 50 Ohm, Maximum Input Power (CW): 3 Watts, Maximum VSWR: 2.8:1, Maximum Insertion Loss: 1.8 dB, Minimum Isolation: 50 dB. SPDT, Terminated, Electromechanical Relay Latching Switch, DC to 53GHz, 28VDC, Solder Terminal, 2.4mm. The PE71S8015 electromechanical RF relay switch from Pasternack is available in a SPDT switch design with a latching actuator. This RF relay SPDT switch with a 2.4mm female connector has a maximum frequency of 53 GHz. The maximum switching speed of this radio frequency SPDT electromechanical switch is 20msec. Pasternack’s PE71S8015 relay switch comes with a maximum VSWR of 2.8:1 and a maximum insertion loss of 1.8 dB. This electromechanical RF relay switch is available in 1.95-inch length, 0.92-inch height and 2.75-inch width. The RF relay switch with solder terminals has a typical operating voltage of 28 Volts. Our radio frequency electromechanical relay switch from Pasternack can operate at temperatures ranging from -25 to 65 deg C. This latching RF switch with a 2.4mm female connector has a minimum isolation of 50 dB. Additional dimensions and specifications for this electromechanical relay switch are on our downloadable PDF datasheet above. Our PE71S8015 electroless nickel finished RF switch has a maximum actuating set current of 200 mA. SPDT electromechanical relay radio frequency latching switch PE71S8015 is part of our RF, microwave, and millimeter wave components available from Pasternack. Our SPDT coaxial RF electromechanical relay switch can ship worldwide the same business day that it is bought, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal RF latching switches for your requirements.

1 : $3,160.0
5 : $3,033.6
10 : $2,907.2
25 : $2,780.8

PE71S8018

Pasternack Enterprises

Key Specifications, Connector Series: 2.4mm, Connector Gender: Female, Switch Design: SP6T, Minimum Frequency: DC, Maximum Frequency: 52 GHz, Maximum Input Power (CW): 3 Watts, Maximum VSWR: 2.8:1, Maximum Insertion Loss: 2.3 dB, Minimum Isolation: 50 dB. SP6T, Electromechanical Relay Latching Switch, DC to 52GHz, 28VDC, D-Sub, 2.4mm. The PE71S8018 electromechanical RF relay switch from Pasternack is available in a SP6T switch design with a latching actuator. This RF relay SP6T switch with a 2.4mm female connector has a maximum frequency of 52 GHz. The maximum switching speed of this radio frequency SP6T electromechanical switch is 20msec. Pasternack’s PE71S8018 relay switch comes with a maximum VSWR of 2.8:1 and a maximum insertion loss of 2.3 dB. This electromechanical RF relay switch is available in 1.75-inch length, 1.75-inch height and 1.75-inch width. The RF relay switch with a D-subminiature control connector type has a typical operating voltage of 28 Volts. Our radio frequency electromechanical relay switch from Pasternack can operate at temperatures ranging from -25 to 65 deg C. This latching RF switch with a 2.4mm female connector has a minimum isolation of 50 dB. Additional dimensions and specifications for this electromechanical relay switch are on our downloadable PDF datasheet above. Our PE71S8018 electroless nickel finished RF switch has a maximum actuating set current of 110 mA. SP6T electromechanical relay radio frequency latching switch PE71S8018 is part of our RF, microwave, and millimeter wave components available from Pasternack. Our SP6T coaxial RF electromechanical relay switch can ship worldwide the same business day that it is bought, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal RF latching switches for your requirements.

1 : $5,850.0
5 : $5,616.0
10 : $5,382.0
25 : $5,148.0

PE71S8029

Pasternack Enterprises

Key Specifications, Connector Series: 2.4mm, Connector Gender: Female, Switch Design: Transfer, Minimum Frequency: DC, Maximum Frequency: 52 GHz, Maximum Input Power (CW): 3 Watts, Maximum VSWR: 2.8:1, Maximum Insertion Loss: 2.3 dB, Minimum Isolation: 50 dB. Transfer, Electromechanical Relay Latching Switch, DC to 52GHz, 28VDC, Indicators, TTL, Diodes, Solder Terminal, 2.4mm. The PE71S8029 electromechanical RF relay switch from Pasternack is available in a transfer switch design with a latching actuator. This RF relay transfer switch with a 2.4mm female connector has a maximum frequency of 52 GHz. The maximum switching speed of this radio frequency transfer electromechanical switch is 20msec. Pasternack’s PE71S8029 relay switch comes with a maximum VSWR of 2.8:1 and a maximum insertion loss of 2.3 dB. This electromechanical RF relay switch is available in 1.95-inch length, 0.92-inch height and 2.75-inch width. The RF relay switch with solder terminals has a typical operating voltage of 28 Volts. Our radio frequency electromechanical relay switch from Pasternack can operate at temperatures ranging from -25 to 65 deg C. This PE71S8029 transfer electromechanical RF relay latching switch features indicators, TTL logic and diodes. This latching RF switch with a 2.4mm female connector has a minimum isolation of 50 dB. Additional dimensions and specifications for this electromechanical relay switch are on our downloadable PDF datasheet above. Our PE71S8029 electroless nickel finished RF switch has a maximum actuating set current of 250 mA. Transfer electromechanical relay radio frequency latching switch PE71S8029 is part of our RF, microwave, and millimeter wave components available from Pasternack. Our transfer coaxial RF electromechanical relay switch can ship worldwide the same business day that it is bought, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal RF latching switches for your requirements.

1 : $3,950.0
5 : $3,792.0
10 : $3,634.0
25 : $3,476.0

PE71S8025

Pasternack Enterprises

Key Specifications, Connector Series: 2.4mm, Connector Gender: Female, Switch Design: SP6T, Minimum Frequency: DC, Maximum Frequency: 52 GHz, Maximum Input Power (CW): 3 Watts, Maximum VSWR: 2.8:1, Maximum Insertion Loss: 2.3 dB, Minimum Isolation: 50 dB. SP6T, Terminated, Electromechanical Relay Normally Open Switch, 52GHz, 28VDC, D-Sub, 2.4mm. The PE71S8025 electromechanical RF relay switch from Pasternack is available in a SP6T switch design with a normally open actuator. This RF relay SP6T switch with a 2.4mm female connector has a maximum frequency of 52 GHz. The maximum switching speed of this radio frequency SP6T electromechanical switch is 20msec. Pasternack’s PE71S8025 relay switch comes with a maximum VSWR of 2.8:1 and a maximum insertion loss of 2.3 dB. This electromechanical RF relay switch is available in 1.75-inch length, 1.75-inch height and 1.75-inch width. The RF relay switch with a D-subminiature control connector type has a typical operating voltage of 28 Volts. Our radio frequency electromechanical relay switch from Pasternack can operate at temperatures ranging from -25 to 65 deg C. This normally open RF switch with a 2.4mm female connector has a minimum isolation of 50 dB. Additional dimensions and specifications for this electromechanical relay switch are on our downloadable PDF datasheet above. Our PE71S8025 electroless nickel finished RF switch has a maximum actuating set current of 200 mA. SP6T electromechanical relay radio frequency normally open switch PE71S8025 is part of our RF, microwave, and millimeter wave components available from Pasternack. Our SP6T coaxial RF electromechanical relay switch can ship worldwide the same business day that it is bought, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal RF normally open switches for your requirements.

1 : $8,440.0
5 : $8,102.4
10 : $7,764.8
25 : $7,427.2

PE71S8009

Pasternack Enterprises

Key Specifications, Connector Series: SMA, Connector Gender: Female, Switch Design: Absorptive, Minimum Frequency: 20 MHz, Maximum Frequency: 6 GHz, Impedance: 50 Ohm, Maximum Input Power: 20 Watts, Maximum Input VSWR: 1.8:1, Maximum Insertion Loss: 2.5 dB, Minimum Isolation: 55 dB. Absorptive SPDT PIN Diode Swtich Operating from 20 MHz to 6 GHz up to +26 dBm Hot Switching and SMA. PE71S8009 PIN diode switch from Pasternack is a Absorptive design. Our RF Absorptive PIN diode switch uses SMA connectors at 50 Ohm. This SMA PIN diode Absorptive switch has a minimum frequency of 20 MHz and a maximum frequency of 6 GHz. The Pasternack PIN diode Absorptive RF switch is rated at a switching speed of ns and a maximum input power of 20 Watts (+43 dBm ). Insertion loss maximum of this SMA Absorptive switch is 2.5 dB with an isolation minimum of 55 dB. Absorptive PIN diode radio frequency switch PE71S8009 is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. Our Absorptive SMA coaxial PIN diode switch can ship worldwide the same day that it is bought as with our other available RF parts.

1 : $1,830.0
5 : $1,756.8
10 : $1,683.6
25 : $1,610.4

PE71S8023

Pasternack Enterprises

Key Specifications, Connector Series: 2.4mm, Connector Gender: Female, Switch Design: SP6T, Minimum Frequency: DC, Maximum Frequency: 52 GHz, Maximum Input Power (CW): 3 Watts, Maximum VSWR: 2.2:1, Maximum Insertion Loss: 1.6 dB, Minimum Isolation: 60 dB. SP6T, Electromechanical Relay Normally Open Switch, 52GHz, 28VDC, Indicators, TTL, Diodes, D-Sub, 2.4mm. The PE71S8023 electromechanical RF relay switch from Pasternack is available in a SP6T switch design with a normally open actuator. This RF relay SP6T switch with a 2.4mm female connector has a maximum frequency of 52 GHz. The maximum switching speed of this radio frequency SP6T electromechanical switch is 20msec. Pasternack’s PE71S8023 relay switch comes with a maximum VSWR of 2.2:1 and a maximum insertion loss of 1.6 dB. This electromechanical RF relay switch is available in 1.75-inch length, 1.75-inch height and 1.75-inch width. The RF relay switch with a D-subminiature control connector type has a typical operating voltage of 28 Volts. Our radio frequency electromechanical relay switch from Pasternack can operate at temperatures ranging from -25 to 65 deg C. This PE71S8023 SP6T electromechanical RF relay normally open switch features indicators, TTL logic and diodes. This normally open RF switch with a 2.4mm female connector has a minimum isolation of 60 dB. Additional dimensions and specifications for this electromechanical relay switch are on our downloadable PDF datasheet above. Our PE71S8023 electroless nickel finished RF switch has a maximum actuating set current of 140 mA. SP6T electromechanical relay radio frequency normally open switch PE71S8023 is part of our RF, microwave, and millimeter wave components available from Pasternack. Our SP6T coaxial RF electromechanical relay switch can ship worldwide the same business day that it is bought, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal RF normally open switches for your requirements.

1 : $4,760.0
5 : $4,569.6
10 : $4,379.2
25 : $4,188.8

PE71S8024

Pasternack Enterprises

Key Specifications, Connector Series: 2.4mm, Connector Gender: Female, Switch Design: SP6T, Minimum Frequency: DC, Maximum Frequency: 52 GHz, Maximum Input Power (CW): 3 Watts, Maximum VSWR: 2.8:1, Maximum Insertion Loss: 2.3 dB, Minimum Isolation: 50 dB. SP6T, Terminated, Electromechanical Relay Latching Switch, DC to 52GHz, 28VDC, Reset, D-Sub, 2.4mm. The PE71S8024 electromechanical RF relay switch from Pasternack is available in a SP6T switch design with a latching actuator. This RF relay SP6T switch with a 2.4mm female connector has a maximum frequency of 52 GHz. The maximum switching speed of this radio frequency SP6T electromechanical switch is 20msec. Pasternack’s PE71S8024 relay switch comes with a maximum VSWR of 2.8:1 and a maximum insertion loss of 2.3 dB. This electromechanical RF relay switch is available in 1.75-inch length, 1.75-inch height and 1.75-inch width. The RF relay switch with a D-subminiature control connector type has a typical operating voltage of 28 Volts. Our radio frequency electromechanical relay switch from Pasternack can operate at temperatures ranging from -25 to 65 deg C. This PE71S8024 SP6T electromechanical RF relay latching switch features a reset. This latching RF switch with a 2.4mm female connector has a minimum isolation of 50 dB. Additional dimensions and specifications for this electromechanical relay switch are on our downloadable PDF datasheet above. Our PE71S8024 electroless nickel finished RF switch has a maximum actuating set current of 110 mA. SP6T electromechanical relay radio frequency latching switch PE71S8024 is part of our RF, microwave, and millimeter wave components available from Pasternack. Our SP6T coaxial RF electromechanical relay switch can ship worldwide the same business day that it is bought, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal RF latching switches for your requirements.

1 : $8,440.0
5 : $8,102.4
10 : $7,764.8
25 : $7,427.2

PE71S8010

Pasternack Enterprises

Key Specifications, Connector Series: 2.4mm, Connector Gender: Female, Switch Design: SPDT, Minimum Frequency: DC, Maximum Frequency: 53 GHz, Maximum Input Power (CW): 3 Watts, Maximum VSWR: 2.2:1, Maximum Insertion Loss: 1.2 dB, Minimum Isolation: 50 dB. SPDT, Electromechanical Relay Failsafe Switch, DC to 53GHz, 28VDC, Solder Terminal, 2.4mm. The PE71S8010 electromechanical RF relay switch from Pasternack is available in a SPDT switch design with a failsafe actuator. This RF relay SPDT switch with a 2.4mm female connector has a maximum frequency of 53 GHz. The maximum switching speed of this radio frequency SPDT electromechanical switch is 20msec. Pasternack’s PE71S8010 relay switch comes with a maximum VSWR of 2.2:1 and a maximum insertion loss of 1.2 dB. This electromechanical RF relay switch is available in 1.95-inch length, 0.92-inch height and 2.75-inch width. The RF relay switch with solder terminals has a typical operating voltage of 28 Volts. Our radio frequency electromechanical relay switch from Pasternack can operate at temperatures ranging from -25 to 65 deg C. This failsafe RF switch with a 2.4mm female connector has a minimum isolation of 50 dB. Additional dimensions and specifications for this electromechanical relay switch are on our downloadable PDF datasheet above. Our PE71S8010 electroless nickel finished RF switch has a maximum actuating set current of 90 mA. SPDT electromechanical relay radio frequency failsafe switch PE71S8010 is part of our RF, microwave, and millimeter wave components available from Pasternack. Our SPDT coaxial RF electromechanical relay switch can ship worldwide the same business day that it is bought, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal RF failsafe switches for your requirements.

1 : $1,600.0
5 : $1,536.0
10 : $1,472.0
25 : $1,408.0

PE71S8019

Pasternack Enterprises

Key Specifications, Connector Series: 2.4mm, Connector Gender: Female, Switch Design: SP6T, Minimum Frequency: DC, Maximum Frequency: 52 GHz, Maximum Input Power (CW): 3 Watts, Maximum VSWR: 2.8:1, Maximum Insertion Loss: 2.3 dB, Minimum Isolation: 50 dB. SP6T, Electromechanical Relay Latching Switch, DC to 52GHz, 28VDC, Indicators, Reset, D-Sub, 2.4mm. The PE71S8019 electromechanical RF relay switch from Pasternack is available in a SP6T switch design with a latching actuator. This RF relay SP6T switch with a 2.4mm female connector has a maximum frequency of 52 GHz. The maximum switching speed of this radio frequency SP6T electromechanical switch is 20msec. Pasternack’s PE71S8019 relay switch comes with a maximum VSWR of 2.8:1 and a maximum insertion loss of 2.3 dB. This electromechanical RF relay switch is available in 1.75-inch length, 1.75-inch height and 1.75-inch width. The RF relay switch with a D-subminiature control connector type has a typical operating voltage of 28 Volts. Our radio frequency electromechanical relay switch from Pasternack can operate at temperatures ranging from -25 to 65 deg C. This PE71S8019 SP6T electromechanical RF relay latching switch features indicators and a reset. This latching RF switch with a 2.4mm female connector has a minimum isolation of 50 dB. Additional dimensions and specifications for this electromechanical relay switch are on our downloadable PDF datasheet above. Our PE71S8019 electroless nickel finished RF switch has a maximum actuating set current of 110 mA. SP6T electromechanical relay radio frequency latching switch PE71S8019 is part of our RF, microwave, and millimeter wave components available from Pasternack. Our SP6T coaxial RF electromechanical relay switch can ship worldwide the same business day that it is bought, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal RF latching switches for your requirements.

1 : $6,820.0
5 : $6,547.2
10 : $6,274.4
25 : $6,001.6

PE71S8021

Pasternack Enterprises

Key Specifications, Connector Series: 2.4mm, Connector Gender: Female, Switch Design: SP6T, Minimum Frequency: DC, Maximum Frequency: 52 GHz, Maximum Input Power (CW): 3 Watts, Maximum VSWR: 2.2:1, Maximum Insertion Loss: 1.6 dB, Minimum Isolation: 60 dB. SP6T, Electromechanical Relay Normally Open Switch, DC to 52GHz, 28VDC, D-Sub, 2.4mm. The PE71S8021 electromechanical RF relay switch from Pasternack is available in a SP6T switch design with a normally open actuator. This RF relay SP6T switch with a 2.4mm female connector has a maximum frequency of 52 GHz. The maximum switching speed of this radio frequency SP6T electromechanical switch is 20msec. Pasternack’s PE71S8021 relay switch comes with a maximum VSWR of 2.2:1 and a maximum insertion loss of 1.6 dB. This electromechanical RF relay switch is available in 1.75-inch length, 1.75-inch height and 1.75-inch width. The RF relay switch with a D-subminiature control connector type has a typical operating voltage of 28 Volts. Our radio frequency electromechanical relay switch from Pasternack can operate at temperatures ranging from -25 to 65 deg C. This normally open RF switch with a 2.4mm female connector has a minimum isolation of 60 dB. Additional dimensions and specifications for this electromechanical relay switch are on our downloadable PDF datasheet above. Our PE71S8021 electroless nickel finished RF switch has a maximum actuating set current of 140 mA. SP6T electromechanical relay radio frequency normally open switch PE71S8021 is part of our RF, microwave, and millimeter wave components available from Pasternack. Our SP6T coaxial RF electromechanical relay switch can ship worldwide the same business day that it is bought, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal RF normally open switches for your requirements.

1 : $4,280.0
5 : $4,108.8
10 : $3,937.6
25 : $3,766.4

PE71S8003

Pasternack Enterprises

Key Specifications, Connector Series: N, Connector Gender: Female, Switch Design: Absorptive, Minimum Frequency: 30 MHz, Maximum Frequency: 512 MHz, Impedance: 50 Ohm, Maximum Input Power: 200 Watts, Maximum Input VSWR: 1.4:1, Maximum Insertion Loss: 0.75 dB, Minimum Isolation: 50 dB. SP4T High Power PIN Diode Switch Operating from 30 MHz to 512 MHz up to 200 Watts Average Power (+53 dBm) and N Type. PE71S8003 PIN diode switch from Pasternack is a Absorptive design. Our RF Absorptive PIN diode switch uses N connectors at 50 Ohm. This N PIN diode Absorptive switch has a minimum frequency of 30 MHz and a maximum frequency of 512 MHz. The Pasternack PIN diode Absorptive RF switch is rated at a switching speed of ns and a maximum input power of 200 Watts (+53 dBm ). Insertion loss maximum of this N Absorptive switch is 0.75 dB with an isolation minimum of 50 dB. Absorptive PIN diode radio frequency switch PE71S8003 is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. Our Absorptive N coaxial PIN diode switch can ship worldwide the same day that it is bought as with our other available RF parts.

1 : $6,290.0
5 : $6,038.4
10 : $5,786.8
25 : $5,535.2

PE71S8007

Pasternack Enterprises

Key Specifications, Connector Series: SMA, Connector Gender: Female, Switch Design: Absorptive, Minimum Frequency: 10 MHz, Maximum Frequency: 1 GHz, Impedance: 50 Ohm, Maximum Input Power: 30 Watts, Maximum Input VSWR: 1.4:1, Maximum Insertion Loss: 0.75 dB, Minimum Isolation: 40 dB. SPDT PIN Diode Swtich Operating from 10 MHz to 1 GHz up to 30 Watts (+44.77 dBm) Hot Switching and SMA. PE71S8007 PIN diode switch from Pasternack is a Absorptive design. Our RF Absorptive PIN diode switch uses SMA connectors at 50 Ohm. This SMA PIN diode Absorptive switch has a minimum frequency of 10 MHz and a maximum frequency of 1 GHz. The Pasternack PIN diode Absorptive RF switch is rated at a switching speed of 40,000 ns and a maximum input power of 30 Watts (+44.8 dBm ). Insertion loss maximum of this SMA Absorptive switch is 0.75 dB with an isolation minimum of 40 dB. Absorptive PIN diode radio frequency switch PE71S8007 is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. Our Absorptive SMA coaxial PIN diode switch can ship worldwide the same day that it is bought as with our other available RF parts.

1 : $3,110.0
5 : $2,985.6
10 : $2,861.2
25 : $2,736.8

PE71S8031

Pasternack Enterprises

Key Specifications, Connector Series: SMT, Switch Design: SPDT, Minimum Frequency: DC, Maximum Frequency: 8 GHz, Impedance: 50 Ohm, Maximum VSWR: 1.4:1, Maximum Insertion Loss: 0.5 dB, Minimum Isolation: 40 dB. SPDT Electromechanical Relay Failsafe Switch, DC to 8 GHz, up to 70W, 24V, Hot Switching, SMT, 2M Lifecycles. PE71S8031 electromechanical RF relay switch from Pasternack is a SPDT switch design with latching actuator. Our SPDT electromechanical RF latching switch uses SMT connectors at 50 Ohms. This SMT RF relay SPDT switch has a maximum frequency of 8 GHz. The Pasternack radio frequency SPDT SMT electromechanical relay switch is rated at a control voltage of 24V. SMT SPDT electromechanical RF relay latching switch features Hot Switching with an isolation minimum of 40 dB. SPDT electromechanical relay radio frequency latching switch PE71S8031 is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. Our SPDT SMT coaxial RF relay electromechanical switch can ship worldwide the same day that it is bought as with our other available RF parts.

1 : $470.99
10 : $452.15
25 : $433.31
100 : $414.47

TE Connectivity

VS801-51

TE Connectivity

VS801-51 Liquid Level Sensor Entry Style: Top Bottom Fluid Type: Water Contact Form: A Port Fitting: M16 External M16 Internal Case Material: Glass Filled Polypropylene Top Water | Vertical Liquid Level Switch | Part Number: VS801-51 | Internal Number: 81501-000 | Glass Filled Polypropylene | TE Connectivity
RoHS : Compliant

1 : $23.65

S80E4JS3 Reseller

Link URL