www.micropowerdirect.com

Model

Number

Input

Output

Efficiency

(%, Typ)

Over

Voltage

Protection

(VDC Typ)

Capacitive

Load

(µF, Max)

Fuse

Rating

Slow-Blow

(mA)

Voltage

(VDC)

Current

(mA, Max)

Current

(mA, Min

)

Nominal

Range

MPV0560S-05RHI

600

200 - 1200

5.0

1,000

0.0

73

7.5

10,000

1,000

MPV1060S-05RHI

600

200 - 1200

5.0

2,000

0.0

75

7.5

6,000

1,000

MPV1060S-24RHI

600

200 - 1200

24.0

420

0.0

82

29.0

1,500

1,000

Notes:

1. To meet the specified ripple and noise levels, a 1 µF ceramic capacitor must be connected in parallel with a 10 µF electrolytic capacitor across the output of the module (pins 5 and 6). For more

information, please contact the factory.

2. All units will meet EN 55022 (CE/RE) class A with the input circuit shown in the “Typical Connection 2” diagram on page 3. Contact the factory for more information.

3. All units will meet EN 61000-4-4 (±4 kV) with the input circuit shown in the “Typical Connection 2” diagram on page 3. Contact the factory for more information.

4. All units will meet the requirements of EN 61000-4-5 (±1 kV/±2 kV), with the input circuit shown in the “Typical Connection 2” diagram on page 3. Contact the factory for more information.

5. Lead temperature is measured 1.5 mm from the case.

6. Operation at no load will not damage the units, however, they may not meet all specifications.

7. It is recommended that a fuse be used on the input of a power supply for protection. For the MPV0560-xxRHI & MPV1060-xxRHI series, a 1.0A slow blow should be used.

Model Selection Guide