| Motore di ricerca datesheet componenti elettronici |
|
ST10F166 Scheda tecnica(PDF) 37 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
ST10F166 Scheda tecnica(HTML) 37 Page - STMicroelectronics |
|
37 / 62 page ![]() ST10F166 37/62 18 ELECTRICAL CHARACTERISTICS 18.1 Absolute Maximum Ratings Ambient temperature under bias (T A):... . . ... ... .. .... ... . . . . ... 0 to +70 °C Storage temperature (T ST) ... . . ... .. ... ... ... ... ... .... . . . . – 65 to+125 °C Voltage on V CC pins with respect to ground (VSS) . . ... ... ... ... . ..–0.5 to+6.5 V Voltage on any pin with respect to ground (V SS) ... .. ... .... . –0.3 to V CC +0.3 V Input current on any pin during overload condition . . . . . . . . . . . . . . -10 to +10 mA. Absolute sum of all input currents during overload condition . .... ... ... .100 mA. Power dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.5 W Flash programming voltage (V PP) . . ... ... ..... ... . ... ... ... . – 0.3 to+ 13.5 V Note: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. During overload condi- tions (VIN>VCC or VIN<VSS) the voltage on pins with respect to ground (VSS) must not exceed the values defined by the Absolute Maximum Ratings. 18.2 Parameter Interpretation The parameters listed in the following partly represent the characteristics of the ST10R165 and partly its demands on the system. To aid in interpreting the parame- ters right, when evaluating them for a design, they are marked in column “Symbol”: CC (Controller Characteristics): The logic of the ST10R165 will provide signals with the respective timing characteris- tics. SR (System Requirement): The external system must provide signals with the respective timing characteristics to the ST10R165. |
|
Link URL |
| Lei ha avuto il aiuto da alldatasheet? [ DONATE ] |
Di alldatasheet | Richest di pubblicita | contatti | Privacy Policy | Collegamento alla scheda tecnica | scambio Link | Ricerca produttore All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |