MP8124GD datasheet(3/21 Pages) MPS

3 / 21 page

MP8124 – 500mA, LNB POWER SUPPLY AND CONTROL REGULATOR

MP8124 Rev. 1.0

www.MonolithicPower.com

11/11/2015

MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.

ABSOLUTE MAXIMUM RATINGS (1)

VDD ................................................-0.3V to 20V

VOUT, SW, VBOOST…..................-0.3V to 40V

BST...............................................VBOOST + 6.5V

All other pins .................................-0.3V to 6.5 V

Continuous power dissipation (TA = +25°C)

(2)

........................................................... 1.78W

Junction temperature ................................150°C

Lead temperature .....................................260°C

Storage temperature................ -65°C to +150°C

Recommended Operating Conditions

(3)

Supply voltage (VIN) ............................8V to 14V

Operating junction temp. (TJ). .. -40°C to +125°C

Thermal Resistance

(4)

θJA

θJC

QFN-14 (2mmx3mm) …….....…..70.......15....°C/W

NOTES:

1) Exceeding these ratings may damage the device.

2) The maximum allowable power dissipation is a function of the

maximum junction temperature TJ (MAX), the junction-to-

ambient thermal resistance θJA, and the ambient temperature

TA. The maximum allowable continuous power dissipation at

any ambient temperature is calculated by PD (MAX) = (TJ

(MAX)-TA)/θJA. Exceeding the maximum allowable power

dissipation produces an excessive die temperature, causing

the regulator to go into thermal shutdown. Internal thermal

shutdown circuitry protects the device from permanent

damage.

3) The device is not guaranteed to function outside of its

operating conditions.

4) Measured on JESD51-7, 4-layer PCB.

MP8124GD Scheda tecnica(PDF) 3 Page - Monolithic Power Systems