LM324W datasheet(4/13 Pages) STMICROELECTRONICS

4 / 13 page

LM124W - LM224W - LM324W

4/13

Slew Rate

VCC = 15V, Vi = 0.5 to 3V, RL = 2kΩ, CL = 100pF, unity Gain

0.4

µs

GBP

Gain Bandwidth Product

VCC = 30V, f =100kHz,Vin = 10mV, RL = 2kΩ, CL = 100pF

1.3

MHz

THD

Total Harmonic Distortion

f = 1kHz, Av = 20dB, RL = 2kΩ, Vo = 2Vpp, CL = 100pF, VCC = 30V

0.015

Equivalent Input Noise Voltage

f = 1kHz, Rs = 100Ω, VCC = 30V

DVio

Input Offset Voltage Drift

µV/°C

DIIio

Input Offset Current Drift

200

pA/°C

Vo1/Vo2 Channel Separation - note

1kHz

≤ f ≤ 20kHZ

120

The direction of the input current is out of the IC. This current is essentially constant, independent of the state of the output so no loading change

exists on the input lines.

Vo = 1.4V, Rs = 0Ω, 5V < VCC

+ < 30V, 0 < V

ic < VCC

+ - 1.5V

The input common-mode voltage of either input signal voltage should not be allowed to go negative by more than 0.3V. The upper end of the

common-mode voltage range is VCC

+ - 1.5V, but either or both inputs can go to +32V without damage.

Due to the proximity of external components insure that coupling is not originating via stray capacitance between these external parts. This typically

can be detected as this type of capacitance increases at higher frequences.

Symbol

Parameter

Min.

Typ.

Max.

Unit

------------

LM324W Scheda tecnica(PDF) 4 Page - STMicroelectronics

LM324W Scheda tecnica(HTML) 4 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13

Scheda tecnica Scarica

Link URL