ISL26310 datasheet(23/23 Pages) RENESAS

23 / 23 page

ISL26320, ISL26321, ISL26322, ISL26323, ISL26324, ISL26325, ISL26329

FN8273 Rev 1.00

Page 23 of 23

September 5, 2013

Package Outline Drawing

M8.15

8 LEAD NARROW BODY SMALL OUTLINE PLASTIC PACKAGE

Rev 4, 1/12

DETAIL "A"

TOP VIEW

INDEX

AREA

-C-

SEATING PLANE

x 45°

NOTES:

1. Dimensioning and tolerancing per ANSI Y14.5M-1994.

2. Package length does not include mold flash, protrusions or gate burrs.

Mold flash, protrusion and gate burrs shall not exceed 0.15mm (0.006

inch) per side.

3. Package width does not include interlead flash or protrusions. Interlead

flash and protrusions shall not exceed 0.25mm (0.010 inch) per side.

4. The chamfer on the body is optional. If it is not present, a visual index

feature must be located within the crosshatched area.

5. Terminal numbers are shown for reference only.

6. The lead width as measured 0.36mm (0.014 inch) or greater above the

seating plane, shall not exceed a maximum value of 0.61mm (0.024 inch).

7. Controlling dimension: MILLIMETER. Converted inch dimensions are not

necessarily exact.

8. This outline conforms to JEDEC publication MS-012-AA ISSUE C.

SIDE VIEW “A

SIDE VIEW “B”

1.27 (0.050)

6.20 (0.244)

5.80 (0.228)

4.00 (0.157)

3.80 (0.150)

0.50 (0.20)

0.25 (0.01)

5.00 (0.197)

4.80 (0.189)

1.75 (0.069)

1.35 (0.053)

0.25(0.010)

0.10(0.004)

0.51(0.020)

0.33(0.013)

8°

0°

0.25 (0.010)

0.19 (0.008)

1.27 (0.050)

0.40 (0.016)

1.27 (0.050)

5.20(0.205)

TYPICAL RECOMMENDED LAND PATTERN

2.20 (0.087)

0.60 (0.023)

ISL26310 Scheda tecnica(PDF) 23 Page - Renesas Technology Corp

ISL26310 Scheda tecnica(HTML) 23 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

Scheda tecnica Scarica

Link URL