• Application examples provided in this document are for reference only. In actual applications, confirm equipment functions and safety before using the product.

• Consult your OMRON representative before using the product under conditions which are not described in the manual or applying the product to nuclear control systems, railroad

systems, aviation systems, vehicles, combustion systems, medical equipment, amusement machines, safety equipment, and other systems or equipment that may have a serious

influence on lives and property if used improperly. Make sure that the ratings and performance characteristics of the product provide a margin of safety for the system or

equipment, and be sure to provide the system or equipment with double safety mechanisms.

OMRON Corporation

Electronic and Mechanical Components Company

Contact: www.omron.com/ecb

Cat. No. G022-E1-02

0413(1111)(W)

Note: Do not use this document to operate the Unit.

XM3-LS

Slim D-Sub Connector

■Dimensions

(Unit: mm)

■Safety Precautions

• Insert the connector into the board and then simultaneously

dip-solder the connector terminals and lock pins to the board.

• Pull or push the connector straight in or out when you connect or

disconnect it. Twisting it may cause damage or faulty contact.

• Do not remove the anchors from the connector. Removing the

anchors may cause damage or faulty contact.

●Automatic Soldering

Automated Soldering Conditions (Jet Flow)

(1) Soldering temperature: 250 ± 5

°C

(2) Continuous soldering time: 5 ± 1 s max.

Precautions for Correct Use

2.74

16.3

24.99

30.8

1.905

5.85

14.7

Nine

dia.

0

24.99 ± 0.05

2.74 ± 0.05

Two

, 3.2

± 0.1

dia.

Board edge

Socket XM3B-0942-1

@2LS

Plug XM3C-0942-1

@2LS

Mounting Holes

(BOTTOM VIEW)

Note: Applicable panel thickness is 1.2 mm max.

Note: The mounting hole and panel cutout dimensions are the same for the Sockets and Plugs.

Note: Applicable board thickness: 1.0 or 1.6 mm.

Panel Cutout

14.5

1.905

24.99

30.8

16.92

Anchors

2.74

5.85

5.8

Two, R3.2

Four, R2.5

31.0 min.

5.8

6.4 min.

11.4 min.

Anchors

Lock pin grounding fixture

Board

(t=1.6 mm)

Lock pin grounding fixture

Board

(t=1.0 mm)