10

■

Precautions

Precautions

Mating / un-mating

Please work according to the following operational procedure:

① Confirmation of insertion direction

Upon insertion, please check the front and rear of the connector at the cable side.

On the front side, the ∆ mark, HRS mark and the display of the pole number are stamped.

② Confirmation of temporary insertion

Please lay the plug into the receptacle gently and insert up to the temporary insertion position.

* If inserted up to the temporary insertion position, the connection can be correctly ensured.

③ Confirmation of insertion

From the temporary insertion position, please push on both sides of the plug simultaneously and with equal force, to confirm the insertion.

△ mark

HRS mark

Number of contacts indicator

CAV No.

Receptacle shell dual-end surface

Receptacle shell dual-end surface

Plug shell end surface

Plug shell end surface

Before temporary insertion

With temporary insertion

Connection

direction

Confirmed insertion

Push in both

sides of the plug.

Mating

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.