FSA221 datasheet(4/19 Pages) ONSEMI

4 / 19 page

www.fairchildsemi.com

FSA221

• Rev. 1.1.0

Functional Description

The FSA221 is a combined USB and audio switch that

enables sharing the D+/D- lines of a USB connector with

stereo audio CODEC outputs. The switch is optimized

for high-speed USB signals and includes an automatic

Vbus-detection circuit. When a USB connector, rather

than a headphone, is connected to the ultra-portable

device the switch is automatically configured for high-

speed USB data transfer. If no Vbus is detected, and yet

VAUDIO is present, the switch is configured for the low-

distortion audio switch path. The audio switch path also

handles

negative

signals

(down

-2V),

which

eliminates the need for large coupling capacitors.

For those applications where the Vbus is generated as a

self-powered device or where Vbus is not removed, the

ASel pin provides the ability to switch, under software

control, to the audio path. The ASel pin is internally

terminated by a resistor to GND (typical value 3M) and

requires no connection for the standard ultra-portable

(cell-phone, MP3, or portable media player). In an

application where the supply to the FSA221 Vbus pin is

not guaranteed to be removed, a GPIO pin can be used

to switch out of high-speed USB mode into audio mode,

using the ASel pin.

The FSA221 Vbus pin must be connected directly to Vbus

or a supply > 3.8V, not an LDO regulated down to 3.6V

or a Vbat-generated supply that may fall below 3.8V in

normal operation.

Application Diagram

bus

audio

Switch Select

Control Circuitry

D+/R

D-/L

D+

D-

Sel

Rpd

GND

Audio

CODEC

3.0V - 3.6V

USB

Mini -AB

Connector

bus

USB 2.0

Source

Figure 5.

Typical Application

FSA221 Scheda tecnica(PDF) 4 Page - ON Semiconductor

FSA221 Scheda tecnica(HTML) 4 Page - ON Semiconductor

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

Scheda tecnica Scarica

Link URL