PTC04

Programmer for Melexis PTC Devices

3901290014501

Page 14 of 15

Data Sheet

Rev 004

December/14

19.

Application Information

When using the PT

C04 in combination with external equipment or other PTC04’s, it is very important to

have a good solid ground connection between the different appliances. A bad ground connection between

appliances and the PTC04 can cause damage to the PTC04. The measuring unit and the digital channels

of the PTC04 are sensitive to level shifts.

When using the PTC04 for End Of Line calibration of a Melexis product, it is mandatory to use qualified

reference equipment for the End Of Line verification of the programmed/calibrated product.

20.

FAQ

Please refer to the document FAQ_PTC04.pdf

21.

Mechanical Outlines

Figure 21-1: Mechanical Outlines

22.

ESD Precautions

Electronic semiconductor products are sensitive to Electro Static Discharge (ESD).

Always observe Electro Static Discharge control procedures whenever handling semiconductor products.