12 Watt Light Ring on

Spreader

OPA730 Series

© TT electronics plc

Issue C

09/2016

Page 1

OPTEK Technology, Inc.

1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200

www.optekinc.com | www.ttelectronics.com

General Note

TT Electronics reserves the right to make changes in product specification without

notice or liability. All information is subject to TT Electronics’ own data and is

considered accurate at time of going to print.

Description:

The OPA730 Series are designed for areas where light output and reliability are essen al. The light beam angles of 40° and

120° are ideal for illumina ng small and medium size areas while requiring minimal space.

A High Performance Heat Spreader (HPHS) is used to ensure the best heat dissipa on of any light assembly in the industry.

OptoTherm

For custom colors and design contact your OPTEK representa ve.

Features:

•

12, 1 wa LEDs per ring

•

Mono-color per ring (Blue, Green, Red, Yellow, White)

•

Two component beam angle op ons (120° or 40°)

•

Universal connector (Tyco 2-292173-2 mates with 173977-2)

•

RoHS Compliant

RoHS

DO NOT LOOK DIRECTLY AT LED WITH

UNSHIELDED EYES OR DAMAGE TO RETINA

MAY OCCUR.

OPA730_

OPA730_D

Part Number

Typical Forward Voltage (V) Luminous Flux (lm)

Beam Angle

Color

Dominant Wavelength

OPA730Y

15.0

420

120°

Yellow

587 nm

OPA730B

21.6

108

Blue

470nm

OPA730G

21.6

576

Green

530 nm

OPA730R

15.0

312

Red

625 nm

OPA730W

21.6

576

White

6500°K

OPA730YD

15.0

420

40°

Yellow

587 nm

OPA730BD

21.6

108

Blue

470 nm

OPA730GD

21.6

576

Green

530 nm

OPA730RD

15.0

312

Red

625 nm

OPA730WD

21.6

576

White

6500°K