https://www.phoenixcontact.com/pi/products/1452974

11/22/2018   Page 2 / 5

Sensor/actuator box - SACB-8/16-SC SCO P - 1452974

Technical data

General

Using larger screwdrivers or excessive force may damage the PCB

terminal blocks.

When using ferrules, the wires can be inserted straight into the PCB

terminal blocks without opening the clamping area.

Ambient conditions

Degree of protection

IP65

IP67

Ambient temperature (operation)

-25 °C ... 80 °C

Master cable data/connection data

Connection method

Spring-cage connection

Conductor cross section min. (signal)

0.2 mm²

Conductor cross section max. (signal)

0.5 mm²

Conductor cross section AWG min. (signal)

24

Conductor cross section AWG max. (signal)

20

Stripping length (signal)

6 mm

Conductor cross section min. (energy)

0.2 mm²

Conductor cross section max. (energy)

1.5 mm²

Conductor cross section AWG min. (energy)

24

Conductor cross section AWG max. (energy)

16

Stripping length (power)

10 mm

External cable diameter min.

7 mm

External cable diameter max.

12 mm

Stripping length

50 mm (Master cable)

Tightening torque, cover screw

1 Nm

Tightening torque, union nut

2.5 Nm

Tightening torque slot sensor/actuator cable

0.4 Nm

Tightening torque of mounting screw for fixing the housing

0.5 Nm

Insulation material

Housing material

PBT

Material of the moulding mass

PUR

Contact material

Cu alloy

Contact surface material

gold-plated

Contact carrier material

PA

Material of threaded sleeve

PBT

O-ring material

NBR

Sealing material

NBR (Connector hood)

Pin assignment

Slot/position = Wire color or connection

1 / 4 (A) = WH

1 / 2 (B) = GY/PK

2 / 4 (A) = GN