LP5907 datasheet(13/29 Pages) TI1

Il numero della parte	LP5907

Spiegazioni elettronici	Automotive 250-mA, Ultra-Low-Noise, Low-IQ LDO

PDF	29 Pages

Scroll/Zoom	100%

Produttore elettronici	TI1 [Texas Instruments]

Homepage	http://www.ti.com

Logo

13 / 29 page

LP5907-Q1

www.ti.com

SNVSA34D – SEPTEMBER 2014 – REVISED DECEMBER 2018

Product Folder Links: LP5907-Q1

Submit Documentation Feedback

7.4 Device Functional Modes

7.4.1 Enable (EN)

The LP5907-Q1 Enable (EN) pin is internally held low by a 1-MΩ resistor to GND. The EN pin voltage must be

higher than the VIH threshold to ensure that the device is fully enabled under all operating conditions.

When the EN pin is pulled low, and the output is disabled, the output automatic discharge circuitry is activated.

Any charge on the OUT pin is discharged to GND through the internal 230-Ω (typical) pull-down resistance.

7.4.2 Minimum Operating Input Voltage (VIN)

The LP5907-Q1 does not include any dedicated undervoltage lockout circuitry. The LP5907-Q1 internal circuitry

is not fully functional until VIN is at least 2.2 V. The output voltage is not regulated until VIN has reached at least

the greater of 2.2 V or (VOUT + VDO).

LP5907 Scheda tecnica(PDF) 13 Page - Texas Instruments