SYNPWM datasheet(20/57 Pages) FEELING

20 / 57 page

FM8P73B

Web site: http://www.feeling-tech.com.tw

Rev1.0 Nov 20, 2013

P.20/FM8P73B

FEELING

TECHNOLOGY

2.1.14

ADDATL, ADDATH (AD conversion data high and low)

Address

Name

1Ah (r)

ADDATL

1Bh (r)

ADDATH

Legend: - = unimplemented, read as ‘0’.

The ADDATL and ADDATH registers is ADC conversion result. When ADC conversion is completed, the result is

loaded into ADDATL and ADDATH, the ADCEN bit will be cleared, and the ADCIF bit will be set (if ADCIE are set).

2.1.15

APHCON, BPHCON (Port A and Port B Pull-high Control)

Address

Name

1Dh(r/w)

APHCON

PHA5

PHA4

PHA3

PHA2

PHA1

PHA0

1Eh(r/w)

BPHCON

PHB7

PHB6

PHB5

PHB4

PHB2

PHB1

PHB0

Legend: - = unimplemented, read as ‘0’.

Those registers are used to setup pull-high resistor enable/disable of each IO pins.

= 1,

= 0,

Pull-high resistor enable.

Pull-high resistor disable.

2.1.16

INTPB (Port B Interrupt / Wakeup control)

Address

Name

20h(r/w)

INTPB

PB7IEN

PB6IEN

PB5IEN

PB4IEN

PB3IEN

PB2IEN

PB1IEN

PB0IEN

This register is used to enable/disable the interrupt/wakeup function of Port B. Please refer to 2.7.1 for detail

description of External Interrupt and Wake up function.

= 1,

= 0,

Selected IO interrupt/wakeup enable.

Selected IO interrupt/wakeup disable.

SYNPWM Scheda tecnica(PDF) 20 Page - Feeling Technology Corp.

SYNPWM Scheda tecnica(HTML) 20 Page - Feeling Technology Corp.

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57

Scheda tecnica Scarica

Link URL