NICKEL BOND BLADES

PRECISION ACCRETECH BLADE

MN type has rigidity of

more than 1.5 times

succeeding the standard

bond line, which enables

the high-speed cutting

by ultra-thin blade in

increasingly demands.

Rigidity comparison

Evolutionary version of standard type in response

to the needs of ultra-thin blade.

MN type has realized the rigidity of more than 1.5

times succeeding the standard bond lineup and en-

ables the high-speed cutting.

Based on the standard type, rigidity was upgraded to its limit

and cutting straightness was improved.

Realized a high quality cutting surface by controlling the

amount of grit protrusion on the lateral face of the blade.

Decrease in the grit shedding on lateral face of blade to

prevent blade deformation.

Lessening adhesion of cutting powder to the blade surface.

Cutting ability improvement due to the special slits.

Processing example

Nickel blade (MN type)

580:NICKEL BOND BLADES(MN)

2.0

1.8

1.6

1.4

1.2

1.0

0.8

0.6

0.4

0.2

0.0

M type

MN type

1.5 T

ime

s up

!

Prevent blade deformation

caused by grit dropping

abnormally; minimize

adhesion of cutting powder

to the blade. MN type

enables cutting in good

condition even if the

intermediate dress

frequency is decreased.

TOKYO SEIMITSU