Conclusion

The MAX6100 successfully meets the quality and reliability standards required of all Maxim products. In addition,

Maxim’s continuous reliability monitoring program ensures that all outgoing product will continue to meet Maxim’s quality

and reliability standards.

Table of Contents

I. ........Device Description

V. ........Quality Assurance Information

II. ........Ma nufacturing Information

VI. .......Reliability Evaluation

III. .......Packaging Information

IV. .......Die Information

.....Attachments

I. Device Description

A. General

The MAX6100 is a low-cost, low-dropout (LDO), micropower voltage references. This three-terminal reference has an

output voltage option of 1.8V. It features a proprietary curvature-correction circuit and laser-trimmed, thin-film

resistors that result in a low temperature coefficient of 75ppm/°C (max) and an initial accuracy of ±0.4% (max). This

device is specified over the extended temperature range (-40°C to +85°C).

This series-mode voltage reference draws only 90µA of supply current and can source 5mA and sink 2mA of load

current. Unlike conventional shunt-mode (two-terminal) references that waste supply current and require an external

resistor, this device offers a supply current that is virtually independent of the supply voltage (with only a 4µA/V

variation with supply voltage) and does not require an external resistor. Additionally, this internally compensated

device does not require an external compensation capacitor and is stable with load capacitance. Eliminating the

external compensation capacitor saves valuable board area in space-critical applications. Low dropout voltage and

supply-independent, ultra-low supply current makes this device ideal for battery-operated, high-performance, low-

voltage systems.

The MAX6100 is available in a tiny 3-pin SOT23 packages.

B. Absolute Maximum Ratings

Item

Rating

(Voltages Referenced to GND)

IN

-0.3V to +13.5V

OUT

-0.3V to (VIN + 0.3V)

Output Short-Circuit to GND or IN (VIN < 6V)

Continuous

Output Short-Circuit to GND or IN (VIN = 6V)

60s

Operating Temperature Range

-40°C to +85°C

Storage Temperature Range

-65°C to +150°C

Lead Temperature (soldering, 10s)

+300°C

Continuous Power Dissipation (TA = +70°C)

3-Pin SOT23

320mW

Derates above +70°C

3-Pin SOT23

4.0mW/°C