Bussmann series HEB breakaway and non-breakaway

in-line fuse holders for UL 13/32” x 1-1/2” supplemental fuses

Technical Data 2127

Effective January 2019

Eaton

1000 Eaton Boulevard

Cleveland, OH 44122

Eaton.com

Bussmann Division

114 Old State Road

Ellisville, MO 63021

United States

Eaton.com/bussmannseries

© 2019 Eaton

All Rights Reserved

Printed in USA

Publication No. 2127 - BU-SB15154

January 2019

Eaton and Bussmann are valuable trademarks

of Eaton in the US and other countries. You

are not permitted to use the Eaton trademarks

without prior written consent of Eaton.

CSA is a registered trademark of the Canadian

Standards Group.

Sta-Kon is a registered trademark of Thomas

& Betts.

UL is a registered trademark of the

Underwriters Laboratories, Inc.

Follow us on social media to get the

latest product and support information.

For Eaton’s Bussmann series

product information,

call 1-855-287-7626 or visit:

Eaton.com/bussmannseries

The only controlled copy of this data sheet is the electronic read-only version located on the Eaton network drive. All other copies of this document are

by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the

end user with design applications. Eaton reserves the right, without notice, to change design or construction of any products and to discontinue or limit

distribution of any products. Eaton also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once

a product has been selected, it should be tested by the user in all possible applications.

Recommended crimping tools

A wide variety of crimping tools can be used with the HEB fuse

holders. Some of the commercially available tools are listed in the

table below. This list is not intended to exclude the use of other

crimping tools that can provide similar crimps or indents.

HEB terminal

T & B P/N (Die)

A

WT-111M (Die C)

Sta-Kon ERG4002 (Die C)

B

WT-115A (Die D)

C

TBM5 (Grey Die)

WT-115A (Die E)

D

TBM5 (Brown Die)

TBM8 (Brown Die)

WT-115A (Die F)

Z

WT-111M (Die A)

Sta-Kon ERG4002 (Die A)

N, P, Q, R, T

TBM8 (Orange Die)