GPL10B datasheet(13/23 Pages) GENERALPLUS

13 / 23 page

GPL10B

Proprietary & Confidential

May 29, 2014

Version: 1.5

5.11. Reset Function

The GPL10B can be reset by setting the RESET pin to ground

voltage and its operation starts when this pin is set to power

voltage.

Also an automatic reset function (internal reset function)

operates when power is turned on.

5.12. Watchdog Function

The GPL10B provides a watchdog timer.

The watchdog timer

must be reset when 2Hz wake-up by writing $0F; otherwise, it will

reset the system.

5.13. Mask Option

The following type mask option is available.

4MHz R Oscillator clock Resistor: Select one of A, B

A) Internal resistor

B) external resistor

CPUCK frequency: Select one of A, B

A). 1MHz

B). 2MHz

IOEF0 to IOEF5: Select one of A, B, C, D (Refer to

INPUT/OUTPUT)

A). Without Fixed Pull Low Resistor 200K-Ohm, with Feedback

MOS

B). With Fixed Pull Low Resistor 200K-Ohm, without Feedback

MOS

C). With Fixed Pull Low Resistor 200K,-Ohm with Feedback MOS

D). Without Fixed Pull Low Resistor 200K-Ohm, without Feedback

MOS

32768Hz clock source: Select one of A, B (Refer to R oscillator)

A). 32768Hz Crystal Oscillator

B). R Oscillator

GPL10B Scheda tecnica(PDF) 13 Page - Generalplus Technology Inc.