Connection Diagrams

20141599

8–Bump Thin Micro SMD Package, Large Bump

NS Package Number TLA08GNA

Order Information

Order Number

Package Marking (Note)

Supplied As

LM3202TL

XTS/29

250 units, Tape-and-Reel

LM3202TLX

XTS/29

3000 units, Tape-and-Reel

Note: The actual physical placement of the package marking will vary from part to part. The package marking “X” designates the date

code. “T” is a NSC internal code for die traceability. “S” designates the device type as switcher device. Both will vary considerably. “29”

identifies the device (part number, option, etc.).

Pin Descriptions

Pin #

Name

Description

A1

PV

IN

Power Supply Voltage Input to the internal PFET switch.

B1

V

DD

Analog Supply Input.

C1

EN

Enable Input. Set this digital input high for normal operation. For shutdown, set low.

C2

V

CON

Voltage Control Analog input. V

C3

FB

Feedback Analog Input. Connect to the output at the output filter capacitor.

B3

SGND

Analog and Control Ground

A3

PGND

Power Ground

A2

SW

Switch node connection to the internal PFET switch and NFET synchronous rectifier.

Connect to an inductor with a saturation current rating that exceeds the maximum Switch Peak

Current Limit specification of the LM3202.

www.national.com

2