134

SPECIFICATIONS

Voltage Rating: 600V

Amperage: Based on NEC Table 310.16,

using 75°C copper wire

Material: Phenolic rated at 150°C and Thermoplastic rated

at 125°C (LD1400 and LS1300 series only)

Connector: Standard: Highly conductive aluminum, tin plated

Copper: Highly conductive copper, tin plated

Flammability Rating: 94V-0

Approvals: UL Recognized (File No. E171395)

CSA Certified (File No. LR700111)

ORDERING INFORMATION

Distribution/Splicer Blocks and Covers

Distribution Block

Example Part No.

Splicer Block

Example Part No.

LPBC0-2

LX0XXX-2

LPBC0-3

LX0XXX-3

LPBC2-1

LX2XXX-1

LPBC2-2

LX2XXX-2

LPBC2-3

LX2XXX-3

LPBC3-1

LX3XXX-1

LPBC3-2

LX3XXX-2

LPBC3-3

LX3XXX-3

LPBC4-1

LX4XXX-1

LPBC4-2

LX4XXX-2

LPBC4-3

LX4XXX-3

LPBC5-1

LX5XXX-1

LPBC5-2

LX5XXX-2

LPBC5-3

LX5XXX-3

For use with

Power Distribution

Block No.

Littelfuse

Part

Number

Clear Plastic Covers

Littelfuse’s power distribution block covers provide protection

against accidental shorting between poles caused by loose

wires, tools, or other conductive material. They also protect

personnel from accidentally contacting energized connec-

tors. Clear plastic covers are available for most blocks. New

LX2XXX-DIN series blocks offer a hinged cover.

AMPERE RATINGS

The ampere rating per pole for power distribution blocks is

based on the line ampacity of 75° C insulated conductors per

NEC Table 310.16. If 60° C insulated conductors are used,

load must not exceed the ampacity of 60° C conductors. Use

of conductors rated in excess of 75° C is permitted (for

example 90° C), however, load must not exceed the

ampacity of 75° C conductors.

Distribution Block Covers

POWR-BLOKS power distribution blocks offer a safe, conve-

nient way of splicing cables, providing a fixed junction tap-off

point or splitting primary power into secondary circuits.

LX2XXX-DIN series offers integral DIN-Rail mount and an

optional hinged safety cover.

APPLICATIONS

Typical applications include heating, air conditioning and

refrigeration systems, elevator systems, material handling

equipment, control panels, motor controls, switchgear, and

anywhere power needs to be distributed to more than one load.

CONNECTORS

Box lug connectors are designed for use with a single, solid or

class B or C stranded conductor. Use of more than one conductor

per connector opening or use of extra-flexible, fine stranded

conductors, such as welding cable, voids the UL Listing, and may

cause overheating. Manufacturers of cable terminations can

furnish crimp-on sleeves for fine stranded conductors which permit

these conductors to be used with box lugs.

LCH132-1

LX2XXX-1DIN

LCH132-2

LX2XXX-2DIN

LCH132-3

LX2XXX-3DIN

For use with

Power Distribution

Block No.

Littelfuse

Part

Number

Hinged Covers

NEW

NEW