SP8610 datasheet(4/11 Pages) SIPEX

4 / 11 page

PINOUT

HBE is HIGH.

Pin 13 — D

4 — Data Bit 4 if HBE is LOW; LOW if

HBE is HIGH.

Pin 14 —N.C.—This pin is not internally connected.

Pin 15 —N.C.—This pin is not internally connected.

Pin 16— DGND — Digital Ground. Connect to

pin 5 at the device.

Pin 17 — D

3 — Data Bit 3 if HBE is LOW; Data Bit

11 if HBE is HIGH.

Pin 18 — D

2 — Data Bit 2 if HBE is LOW; Data Bit

10 if HBE is HIGH.

Pin 19— D

1 — Data Bit 1 if HBE is LOW; Data Bit

9 if HBE is HIGH.

Pin 20 — D

0 — Data Bit 0 if HBE is LOW. Least

Significant Bit (LSB). Data Bit 8 if HBE is HIGH.

Pin 21 — HBE — High Byte Enable, When held

LOW, data output as 12-bits in parallel. When

held HIGH, four MSBs presented on pins 17–

20, pins 10 – 13 output LOWs. Must be LOW to

initiate conversion.

Pin22—R/C—Read/Convert.Fallingedgeinitiates

conversion when CS is LOW, HBE is LOW, and

BUSY is HIGH.

Pin 23 — CS — Chip Select. Outputs in Hi-Z state

when HIGH. Must be LOW to initiate conversion or

read data.

Pin 24 — BUSY — Output LOW during

conversion. Data valid on rising edge in Con-

vert Mode.

Pin25 — N.C. —Thispinisnotinternallyconnected.

Pin26—V

SD — Positive Digital Power Supply, +5V.

Connect to pin 27, and bypass to DGND.

Pin 27 — V

— Positive Analog Power Supply.

+5V. Connect to pin 26, and bypass to AGND.

Pin28—N.C.—Thispinisnotinternallyconnected.

N.C. 1

±10V IN

±5V IN 3

VREF 4

AGND 5

D11

D10

D7 10

D6 11

D5 12

D4 13

N.C. 14

28 N.C.

27 VSA

26 VSD

25 N.C.

24 BUSY

23 CS

22 R/C

21 HBE

20 D0

19 D1

18 D2

17 D3

16 DGND

15 N.C.

SP8603

SP8605

SP8610

PIN ASSIGNMENT

Pin 1 —No Connection —This pin is not internally

connected.

Pin 2 — IN

1 — 0V to 10V Analog Input. Connected

to AGND for 10V range.

Pin 3 — IN

2 — 0V to 5V Analog Input. Connected

to AGND for 5V range.

Pin 4 — V

REF – Internal Voltage. Reference Output.

Pin 5 — AGND — Analog Ground. Connect to

pin 16 at the device.

Pin 6 — D

— Data Bit 11. Most Significant Bit

(MSB).

Pin 7 — D

10 — Data Bit 10.

Pin 8— D

9 — Data Bit 9.

Pin 9 — D

8 — Data Bit 8.

Pin 10 — D

7 — Data Bit 7 if HBE is LOW; LOW if

HBE is HIGH.

Pin 11 — D

6 — Data Bit 6 if HBE is LOW; LOW if

HBE is HIGH.

Pin 12 — D

5 — Data Bit 5 if HBE is LOW; LOW if

SP8610 Scheda tecnica(PDF) 4 Page - Sipex Corporation

SP8610 Scheda tecnica(HTML) 4 Page - Sipex Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11

Scheda tecnica Scarica

Link URL