Panels and Panel accessories Panels for enclosures

Spec-00310 W

Pentair electrical

SUBJECT TO CHANGE WITHOUT NOTICE

accessories

5

JUncTion BoX and Wall-MoUnT enclosUre

sWinG-oUT Panel KiT

Kits allow mounting standard Hoffman junction box and nema

style panels (purchase separately) near the front of the enclosure

for easy access to or reading of gauges, switches, pilot lights and

other components. Kits consist of heavy-gauge brackets and hinges

which are easily installed by drilling small holes in the sides of the

enclosure and bolting the brackets in place. external screws are

stainless steel; internal components are plated steel. all mounting

hardware and instructions are provided. Sealing washers ensure

the enclosure will meet original Jic or nema standards after

installation.

Swing-out Panel Kits do not fit single-door disconnect enclosures.

BULLETIN: A80

Catalog Number

Description

Maximum

Load (lb.)

Maximum

Load (kg)

Use In

AJCDFK

Junction Box Kit

25

11.3

- Junction boxes where A x B is 8.00 x 6.00 in. (203 x 152 mm) or larger

- HCLO Type 3R enclosures where A x B is 16.00 x 12.00 in. (406 x 305 mm) or smaller

ANADFK

Wall-Mount Enclosure Kit

100

45.4

- One-door Type 4, 4X, 12 and 13 enclosures where A x B is 12.00 x 12.00 in. (305 x 305 mm) or larger

- HCLO Type 3R enclosures where A x B is 16.00 x 16.00 in. (406 x 406 mm) or larger

- HCR Type 3R enclosures where A x B is 16.00 x 12.00 (406 x 305 mm) or larger

- Type 1 enclosures where A x B is 42.00 x 30.00 in. (1067 x 762 mm) or larger

Both kits maintain UL Type 4 and Type 4X rating when properly installed in a Hoffman enclosure.

Maximum load includes the weight of the panel plus the weight of the components, with the weight of the components spread evenly over the panel.