Executing and debugging firmware using a software toolchains

UM1928

18/22

DocID028162 Rev 1

If the user needs to change the project settings (Include directories and preprocessor

defines), he must follow Project>Properties, select C/C++ Build>Settings from the left panel:



For Include directories

C Compiler>Directories>Include path



For pre-processor defines

C Compiler>Symbols> Defined symbols

9.

To debug and run the application, select the project In the Project Explorer and press

F11 to start a debug session.

In the Project Explorer, select the project and press F11 to start a debug session (see

Figure 17: TrueSTUDIO debug window).