ELD5016 datasheet(30/38 Pages) EMC

Il numero della parte	ELD5016

Spiegazioni elettronici	8-BIT Microcontroller

PDF	38 Pages

Scroll/Zoom	100%

Produttore elettronici	EMC [ELAN Microelectronics Corp]

Homepage	http://www.emc.com.tw

Logo

30 / 38 page

eLD5016

8-Bit Microcontroller



Product Specification (V1.0) 2.16.2017

(This specification is subject to change without prior notice)

5.5 Reset and Wake-up

A RESET can be caused by:

(1) External /RESET pin

(2) Power on reset or Power on voltage detector reset (/POVD reset)

(3) WDT timeout (If enabled and in Green or Normal mode)

Note that only Power on reset or Power on voltage detector reset in Case (2) are

enabled in the system by Code Option bit. If /POVDs are disabled, Power on reset is

selected in Case (2). Refer to Figure 5-9.

Figure 5-9 Block Diagram of Reset of controller

Once RESET occurs, the following functions are performed.



The oscillator is running, or will be started.



The Program Counter (R2) is set to all "0".



When power on, the upper 3 bits of R3 and the upper 2 bits of R4 are cleared.



The Watchdog timer and prescaler are cleared.



The Watchdog timer is disabled.



The CONT register is set to all "1".



The other registers (Bit 7...Bit 0)

ELD5016 Scheda tecnica(PDF) 30 Page - ELAN Microelectronics Corp