 |
Motore di ricerca datesheet componenti elettronici |
|
|
Motore di ricerca datesheet componenti elettronici |
|
RX113 Scheda tecnica(PDF) 1 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
RX113 Scheda tecnica(HTML) 1 Page - Renesas Technology Corp |
|
|
1 / 131 page  Datasheet R01DS0216EJ0120 Rev.1.20 Page 1 of 131 Sep 07, 2020 RX113 Group Renesas MCUs Features ■ 32-bit RX CPU core • 32 MHz maximum operating frequency Capable of 50 DMIPS when operating at 32 MHz • Accumulator handles 64-bit results (for a single instruction) from 32- bit × 32-bit operations • Multiplication and division unit handles 32-bit × 32-bit operations (multiplication instructions take one CPU clock cycle) • Fast interrupt • CISC Harvard architecture with five-stage pipeline • Variable-length instruction format, ultra-compact code • On-chip debugging circuit ■ Low power consumption functions • Operation from a single 1.8 to 3.6 V supply • Three low power consumption modes • Low power timer (LPT) that operates during the software standby state • Supply current High-speed operating mode: 0.11 mA/MHz Software standby mode: 0.44 µA • Recovery time from software standby mode: 4.8 µs ■ On-chip flash memory for code, no wait states • Operation at 32 MHz, read cycle of 31.25 ns • No wait states for reading at full CPU speed • 128 to 512 Kbyte capacities • Programmable at 1.8 V • For instructions and operands ■ On-chip data flash memory • 8 Kbytes 1,000,000 Erase/Write cycles (typ.) • BGO (Background Operation) ■ On-chip SRAM, no wait states • 32 and 64 Kbyte capacities ■ Data transfer controller (DTC) • Four transfer modes • Transfer can be set for each interrupt source. ■ Event link controller (ELC) • Module operation can be initiated by event signals without going through interrupts. • Link operation between modules is possible while the CPU is sleeping. ■ Reset and power supply voltage management • Six types including Power-On Reset (POR) • Low voltage detection (LVD) with voltage settings ■ Clock functions • External clock input frequency: Up to 20 MHz • Main clock oscillator frequency: 1 to 20 MHz • Sub-clock oscillator frequency: 32.768 kHz • PLL circuit input: 4 to 8 MHz • Low-speed on-chip oscillator: 4 MHz • High-speed on-chip oscillator: 32 MHz ±1% (–20 to 85°C) • USB-dedicated PLL circuit: 6 and 8 MHz • IWDT-dedicated on-chip oscillator: 15 kHz • Generate a dedicated 32.768-kHz clock for the RTC • On-chip clock frequency accuracy measurement circuit (CAC) ■ Realtime clock (RTC) • 30-second, leap year, and error adjustment functions • Calendar count mode or binary count mode selectable • Capable of initiating exit from software standby mode ■ Independent watchdog timer (IWDT) • 15-kHz on-chip oscillator produces a dedicated clock signal to drive IWDT operation. ■ On-chip functions for IEC 60730 compliance • Clock frequency accuracy measurement circuit, IWDT, functions to assist in RAM testing, etc. ■ Up to 12 channels for communication • USB: USB 2.0 host/function/On-The-Go (OTG) (one channel), full- speed = 12 Mbps, low-speed = 1.5 Mbps, isochronous transfer, and BC (Battery Charger) supported • SCI: Asynchronous mode, clock synchronous mode, smart card interface (up to eight channels) • IrDA interface (one channel, in cooperation with SCI5) • I2C bus interface: Transfer at up to 400 kbps, capable of SMBus operation (one channel) • RSPI: Up to 16 Mbps (one channel) • Serial sound interface (SSI) (one channel) ■ Up to 14 extended-function timers • 16-bit MTU: Input capture/output compare, complementary PWM output, phase counting mode (six channels) • 8-bit TMR (four channels) • 16-bit CMT (four channels) ■ LCD controller/driver • Segment signal output × common signal output: 40 × 4, 36 × 8 • On-chip voltage boost circuit, contrast adjustment, and 5-V panel supported • Blinking function ■ 12-bit A/D converter • Up to 17 channels • 1.0 µs minimum conversion speed • Double trigger (data duplication) function for motor control ■ 12-bit D/A converter • Two channels ■ Comparator B • Two channels ■ Capacitive touch sensing unit (CTSU) • Detection pins: 12 channels (for 100 pins only) • High-sensitive electrostatic capacitance detection using self-capacitance and mutual capacitance methods • On-chip noise canceller that enables high tolerance to disturbance noise • Also supports a mutual capacitance method that allows touch channels to be increased with low pin counts ■ Temperature sensor ■ General I/O ports • 5-V tolerant, open drain, input pull-up ■ Multi-function pin controller (MPC) • Multiple I/O pins can be selected for peripheral functions. ■ Unique ID • 32-byte ID code for the MCU ■ Operating temperature range • –40 to +85°C • –40 to +105°C PLQP0100KB-A 14 × 14 mm, 0.5 mm pitch PLQP0064KB-A 10 × 10 mm, 0.5 mm pitch PTLG0100JA-A 7 × 7 mm, 0.65 mm pitch 32 MHz, 32-bit RX MCUs, 50 DMIPS, up to 512 Kbytes of flash memory, USB 2.0 full-speed host/function/OTG, up to 12 comms channels, serial sound interface, LCD controller/driver, capacitive touch sensing unit, 12-bit A/D, 12-bit D/A, RTC R01DS0216EJ0120 Rev.1.20 Sep 07, 2020 |
Codice articolo simile - RX113 |
|
Descrizione simile - RX113 |
|
|
Link URL |
| Lei ha avuto il aiuto da alldatasheet? [ DONATE ] |
Di alldatasheet | Richest di pubblicita | contatti | Privacy Policy | Collegamento alla scheda tecnica | scambio Link | Ricerca produttore All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Italian ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
