3M™ Scotch® Filament Tape 8919MSR

Technical Information Note

The following technical information and data should be considered representative or typical only and should not be used for speci cation purposes.

Typical Physical Properties

Property

Values

Method

Backing Color

Transparent

Total Thickness

0.18 mm

7 mil

ASTM D3652

Backing

Polyester lm

Adhesive

Pressure sensitive modi ed synthetic

rubber resin

Reinforcement

Glass yarn

Typical Performance Characteristics

180° Peel Adhesion

Backing

Notes

Substrate

10.8 N/cm

99 oz/in

2 mil Aluminum Foil

12 in/min (300 mm/min)

72 hr dwell on Stainless Steel

108 N/100mm

Stainless Steel

Property: 180° Peel Adhesion

Method: ASTM D3330

Tensile Strength

665 N/cm

6655 N/100mm

380 lb/in

Property: Tensile Strength

Method: ASTM D3759

Methods

ASTM D3759

Handling/Application Information

Application Techniques

An extensive line of application equipment including hand-held manual dispensers, stationary de nite-length dispensers, and an automatic L-Clip applicator is

available. Application of Scotch® Filament Tape 8919MSR is most easily accomplished at room temperature. At lower temperatures, approaching 32°F (0°C), the

adhesive becomes rm. Once applied, Scotch® Tape 8919MSR performs well throughout the normal temperature ranges typically encountered by packaged products

in shipping and storage environments.

Storage and Shelf Life

Store behind present stock. Store in a clean, dry place. Temperature of 40-80°F (4-26°C) and 40-50% relative humidity are recommended. Rotate your stock.

To obtain best performance, use this product within 18 months from date of manufacture.

Trademarks

Scotch is a registered trademark of 3M.