Handling and Application Information

Directions for Use

Follow the instructions for assembly and use of the Automix Application P.N. 08190 and the Mixing Nozzle P.N.

08197. To obtain the best bonding and durability of assemblies, all of the surfaces need to be thoroughly clean. It

is recommended that all glass be cleaned with 3M

TM

Glass Cleaner P.N. 08968. Metal can be cleaned with a

solvent such as 3M

TM

General Purpose Adhesive Cleaner P.N. 08984*. When bonding channel glass it is

recommended that enough adhesive is applied so a small amount of adhesive squeeze-out occurs.

2