MODEL: JPS3

JPS3 SPECIFICATIONS

ES-1575 Rev.9 Page 3/5

http://www.m-system.co.jp/

OUTPUT PULSE WIDTH

• No conversion to one-shot: Duty ratio approx. 50 %;

Internal digital computation calculates the pulse width.

• One-shot Output: Preset pulse width ±20 %

Optional pulse width: 30 μsec. – 300 msec.

INSTALLATION

Power input

•AC: Operational voltage range 85 – 132 V,

47 – 66 Hz, approx. 6 VA

•DC: Operational voltage range: Rating ±10 %, or 85 – 150

V for 110 V rating; ripple 10 %p-p max.; Approx. 3.3 W (140

mA at 24 V)

Operating temperature: -5 to +60°C (23 to 140°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Surface or DIN rail

Weight: 400 g (0.88 lb)

PERFORMANCE

Response time: Sampling time + 50 msec.

The response time equals the interval between the first

input pulse and the first output pulse.

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 2000 V AC @ 1 minute (input 1 or input

2 to output to power to ground)

EXTERNAL VIEW

This unit is programmed and calibrated at the factory according to the Ordering Information Sheet.

Please refer to the instruction manual for the model under “Software Setting” when you need to modify certain specifications.

DO NOT change setting of unused switches and adjusters.

3

2

1

2

3

4

5

6

7

8

1

2

3

4

5

6

7

8

Output Voltage Adj.

Unused

Unused

Unused

One-shot Pulse

Width Adj.

Input Type Selectors

Input Monitor LED (PL2)

Modular Jack

Output Monitor LED

Input Monitor LED (PL1)

1

2

3

4

5

6

7

8

ON

SW1

SW2