6

Pin Description

VOUT (Pin 1):

Ideal Diode Cathode and Output. Bypass VOUT with ESR capacitor. However stability

improves with higher ESRs.

GND (Pin 2):

Power and Signal Ground for the IC.

NC (Pin 3):

No used.

EN (Pin 4):

Status Condition Indicator. This pin indicates the conducting status of the

. If the

through a 470k resistor, a high voltage indicates diode conducting. May be left floating or grounded

when not in use.

VIN (Pin 5):

Ideal Diode Anode and Positive Power Supply for

. When operating

as a

switch it must be bypassed with a low ESR ceramic capacitor.

HM9708