FTS64K datasheet(41/44 Pages) FREESCALE

Il numero della parte	FTS64K

Spiegazioni elettronici	64k bytes of Flash memory

PDF	44 Pages

Scroll/Zoom	100%

Produttore elettronici	FREESCALE [Freescale Semiconductor, Inc]

Homepage	http://www.freescale.com

Logo

41 / 44 page

FTS64K Block User Guide — Version V01.00

Section 6 Interrupts

6.1 General

The FTS64K module can generate an interrupt when all Flash commands are completed or the address,

data and command buffers are empty.

NOTE

Vector addresses and their relative interrupt priority are determined at the MCU level

6.2 Description of Interrupt Operation

Figure 6-1 shows the logic used for generating interrupts.

This system uses the CBEIF and CCIF flags in combination with the enable bits CBIE and CCIE to

discriminate for the interrupt generation.

Table 6-1 Flash Interrupt Sources

Interrupt Source

Interrupt Flag

Local Enable

Global (CCR)

Mask

Flash Address, Data and

Command Buffers empty

CBEIF

(FSTAT from any Flash block)

CBEIE

I Bit

All Commands are

completed on Flash

CCIF

(FSTAT from any Flash block)

CCIE

I Bit

Freescale Semiconductor, Inc.

For More Information On This Product,

Go to: www.freescale.com

FTS64K Scheda tecnica(PDF) 41 Page - Freescale Semiconductor, Inc