47LYV-AR-R datasheet(2/5 Pages) MSYSTEM

2 / 5 page

MODEL: 47LYV

47LYV SPECIFICATIONS

ES-9514 Rev.9 Page 2/5

https://www.m-system.co.jp/

out of the usable range.

Function indicators:

Zro, Spn, D/P, Tch, Fnc, Min, Max

Display mode status and operation status, amber ON or

blink

Engineering unit indication: Sticker label attached

DC, AC, mV, V, kV, μA, mA, A, kA, mW, W,

kW, var, kvar, Mvar, VA, Hz, Ω, kΩ, MΩ,

cm, mm, m, m/sec, mm/min, cm/min, m/min,

m/h, m/s2, inch, ℓ, ℓ/s, ℓ/min, ℓ/h, m3, m3/sec,

m3/min, m3/h, Nm3/h, N·m, N/m2, g, kg, kg/h,

N, kN, Pa, kPa, MPa, t, t/h, ℃, °F, %RH, J,

kJ, MJ, rpm, sec, min, min-1, pH, %, ppm, etc.

INPUT SPECIFICATIONS

■ DC Current: Input resistor incorporated

Measurable range: -10 – +110 %

■ DC Voltage

Measurable range: -10 – +110 %

INSTALLATION

Power consumption

•AC: Approx. 4 VA

•DC: Approx. 2 W

Operating temperature: -10 to +55°C (14 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Panel flush mounting

Weight: 250 g (0.55 lb)

PERFORMANCE

Accuracy: ±0.1 % ±1 digit

Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)

Input resolution: 16 bits

Line voltage effect: ±0.1 % over voltage range

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 2000 V AC @ 1 minute

(input to power to ground)

STANDARDS & APPROVALS

EU conformity:

EMC Directive

EMI EN 61000-6-4

EMS EN 61000-6-2

Low Voltage Directive

EN 61010-1

Installation Category II

Pollution Degree 2

Input to power: Reinforced insulation (300 V)

RoHS Directive

Protection against access to the terminal blocks:

Finger protection (VDE 0660-514)

47LYV-AR-R Scheda tecnica(PDF) 2 Page - M-System Co.,Ltd.

47LYV-AR-R Scheda tecnica(HTML) 2 Page - M-System Co.,Ltd.

Html Pages

1 2 3 4 5

Scheda tecnica Scarica

Link URL