MODEL: R30YV4

R30YV4 SPECIFICATIONS

ES-9005 Rev.3 Page 2/5

https://www.m-system.co.jp/

Atmosphere: No corrosive gas or heavy dust

Mounting: Installation Base (model: R30BS)

Weight: 160 g (0.35 lb)

PERFORMANCE

Conversion accuracy: ±0.1 %

Conversion rate: 10 msec.

Data range: 0 – 10000 of the output range

Data allocation: 4

Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)

Output delay time: ≤ 250 msec. (0 - 90 %)

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 1500 V AC @ 1 minute (output 1 to

output 2 to output 3 to output 4 to internal bus or internal

power)

1500 V AC @ 1 minute (power input to FE; isolated by the

power supply module)

STANDARDS & APPROVALS

EU conformity:

EMC Directive

EMI EN 61000-6-4

EMS EN 61000-6-2

RoHS Directive

FUNCTIONS

■ Output at the loss of communication

• Output Hold

If the network module is in error, the module holds the

signal at error and stands by until the communication

recovers.

• Output set value

If the network module is in error, the module holds the

signal at error or power up and stands by until the

communication recovers. The signal at error or power up is

selectable with PC configurator software (Model: R30 CFG)

Not depending on output at the loss of communication

setting, when power up the module holds the signal at error

or power up and stands by until the normal data is received.