MIC7111 datasheet(2/20 Pages) MICROCHIP

2 / 20 page

MIC7111

DS20006316A-page 2

 2020 Microchip Technology Inc.

1.0

ELECTRICAL CHARACTERISTICS

Absolute Maximum Ratings †

Supply Voltage, (VV+ –VV–) ...................................................................................................................................... +12V

Differential Input Voltage, (VIN+ –VIN–).......................................................................................................... ±(VV+ –VV–)

I/O Pin Voltage, (VIN, VOUT), (Note 1) .......................................................................................... VV+ +0.3V to VV––0.3V

ESD Protection On All Pins, (Note 2) .......................................................................................................................±2 kV

Operating Ratings ††

Supply Voltage, (VV+ –VV–) ........................................................................................................................ +1.8V to +11V

Maximum Power Dissipation .................................................................................................................................. Note 3

† Notice: Absolute maximum ratings indicate limits beyond which damage to the component may occur. Electrical

specifications do not apply when operating the device outside its recommended operating ratings.

†† Notice: The device is not guaranteed to function outside its operating ratings.

Note 1: I/O pin voltage is any external voltage to which an input or output is referenced.

2: Devices are ESD protected, however, handling precautions are recommended. All limits guaranteed by test-

ing on statistical analysis. Human body model, 1.5 kΩ in series with 100 pF.

3: The maximum allowable power dissipation is a function of the maximum junction temperature, TJ(MAX); the

junction-to-ambient thermal resistance, θJA; and the ambient temperature, TA. The maximum allowable

power dissipation at any ambient temperature is calculated using PD = (TJ(MAX) – TA) ÷ θJA. Exceeding the

maximum allowable power dissipation will result in excessive die temperature. See Temperature Specifica-

tions section.

DC ELECTRICAL CHARACTERISTICS (1.8V)

Electrical Characteristics: Unless otherwise indicated, VV+ = +1.8V; VV– = 0V; VCM = VOUT = VV+/2; RL = 1 MΩ;

TJ = +25°C.

Parameters

Sym.

Min.

Typ.

Max.

Units

Conditions

Input Offset Voltage

VOS

—

0.9

—

–40°C ≤ TJ ≤ +85°C

Input Offset Voltage

Temperature Drift

TCVOS

—

2.0

—

μV/

C —

Input Bias Current

—

500

–40°C ≤ TJ ≤ +85°C

Input Offset Current

IOS

—

0.01

0.5

—

–40°C ≤ TJ ≤ +85°C

Input Resistance

RIN

—

>10

—

TΩ

—

Positive Power Supply

Rejection Ratio

+PSRR

—

1.8V ≤ VV+ ≤ 5V, VV– = 0V,

VCM = VOUT = 0.9V

Negative Power Supply

Rejection Ratio

–PSRR

—

–1.8V ≤ VV– ≤ –5V, VV+ = 0V,

VCM = VOUT = –0.9V

Common-Mode Rejection

Ratio

CMRR

—

VCM = –0.2V to +2.0V

Common-Mode Input

Capacitance

CIN

—

MIC7111 Scheda tecnica(PDF) 2 Page - Microchip Technology

MIC7111 Scheda tecnica(HTML) 2 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Scheda tecnica Scarica

Link URL