R3-PC16ASSLASHCE datasheet(2/4 Pages) MSYSTEM

2 / 4 page

MODEL: R3-PC16A

R3-PC16A SPECIFICATIONS

ES-8408 Rev.10 Page 2/4

https://www.m-system.co.jp/

2000 V AC @ 1 minute (power input to FG; isolated on the

power supply module)

STANDARDS & APPROVALS

EU conformity:

EMC Directive

EMI EN 61000-6-4

EMS EN 61000-6-2

RoHS Directive

FUNCTIONS

■ MANUAL COUNT RESET

1) Remove Network Module or its cables and interrupt

communication with other devices.

2) Turn ON the Count Reset SW (SW3-1).

3) Return the module to the base and turn the power supply

on.

4) ERR LED turns on and the module starts resetting its

counter. When the resetting is complete, the LED turns to

green. DO NOT remove the power while the red LED is on.

The RUN LED starts blinking at the same time.

5) After the green LED is confirmed, turn the power supply

off.

6) Turn OFF the Count Reset SW (SW3-1).

7) Return the Network module onto the base and turn the

power supply on.

Note: Count Reset SW must be turned OFF after this

procedure because the module does not start counting with

ON state.

EXTERNAL VIEW

RUN LED

ERR LED

Status Indicator LED

■ FRONT VIEW

■ SIDE VIEW

SW1

SW2

SW3

Count

Reset

OFF

Width

Count Reset SW must be turned off during operation.

R3-PC16AS/CE Scheda tecnica(PDF) 2 Page - M-System Co.,Ltd.

R3-PC16AS/CE Scheda tecnica(HTML) 2 Page - M-System Co.,Ltd.

Html Pages

1 2 3 4

Scheda tecnica Scarica

Link URL