LTC2986 datasheet(4/26 Pages) AD

4 / 26 page

LTC2990

Rev. F

For more information www.analog.com

Note 1: Stresses beyond those listed under Absolute Maximum Ratings

may cause permanent damage to the device. Exposure to any Absolute

Maximum Rating condition for extended periods may affect device

reliability and lifetime.

Note 2: Guaranteed by design and not subject to test.

Note 3: Integral nonlinearity is defined as the deviation of a code from a

straight line passing through the actual endpoints of the transfer curve.

The deviation is measured from the center of the quantization band.

Note 4: Trimmed to an ideality factor of 1.004 at 25°C. Remote diode

temperature drift (TUE) verified at diode voltages corresponding to

the temperature extremes with the LTC2990 at 25°C. Remote diode

temperature drift (TUE) guaranteed by characterization over the LTC2990

operating temperature range.

SYMBOL

PARAMETER

CONDITIONS

MIN

TYP

MAX

UNITS

tSU,STA(MIN)

Minimum Repeated Start Condition Set-Up

Time

600

tSU,STO(MIN)

Minimum Stop Condition Set-Up Time

600

tHD,DATI(MIN)

Minimum Data Hold Time Input

tHD,DATO(MIN)

Minimum Data Hold Time Output

300

900

tSU,DAT(MIN)

Minimum Data Set-Up Time Input

100

tSP(MAX)

Maximum Suppressed Spike Pulse Width

250

SCL, SDA Input Capacitance

The l denotes the specifications which apply over the full operating

temperature range, otherwise specifications are at TA = 25°C. VCC = 3.3V, unless otherwise noted.

ELECTRICAL CHARACTERISTICS

LTC2986 Scheda tecnica(PDF) 4 Page - Analog Devices

LTC2986 Scheda tecnica(HTML) 4 Page - Analog Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26

Scheda tecnica Scarica

Link URL