SN74ACT16373QDLREP datasheet(2/7 Pages) TI

2 / 7 page

SN74ACT16373Q-EP

16-BIT D-TYPE TRANSPARENT LATCH

WITH 3-STATE OUTPUTS

SCAS678B – MAY 2002 – REVISED JULY 2002

POST OFFICE BOX 655303

• DALLAS, TEXAS 75265

ORDERING INFORMATION

PACKAGE†

ORDERABLE

PART NUMBER

TOP-SIDE

MARKING

–40

°C to 125°C

SSOP – DL

Tape and reel

SN74ACT16373QDLREP

ACT16373QEP

† Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are

available at www.ti.com/sc/package.

FUNCTION TABLE

(each section)

INPUTS

OUTPUT

logic diagram (positive logic)

1OE

1LE

1D1

To Seven Other Channels

1Q1

2OE

2LE

2D1

2Q1

To Seven Other Channels

absolute maximum ratings over operating free-air temperature range (unless otherwise noted)‡

Supply voltage range, VCC

–0.5 V to 7 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Input voltage range, VI (see Note 1)

–0.5 V to VCC + 0.5 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Output voltage range, VO (see Note 1)

–0.5 V to VCC + 0.5 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Input clamp current, IIK (VI < 0 or VI > VCC)

±20 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Output clamp current, IOK (VO < 0 or VO > VCC)

±24 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Continuous output current, IO (VO = 0 to VCC)

±24 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Continuous current through VCC or GND

±260 mA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Maximum power dissipation at TA = 55°C (in still air) (see Note 2): DL package

1.2 W

. . . . . . . . . . . . . . . . . . .

Storage temperature range, Tstg

–65

°C to 150°C

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

‡ Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and

functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not

implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

NOTES:

1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.

2. The maximum package power dissipation is calculated using a junction temperature of 150

°C and a board trace length of 750 mils.

SN74ACT16373QDLREP Scheda tecnica(PDF) 2 Page - Texas Instruments

SN74ACT16373QDLREP Scheda tecnica(HTML) 2 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7

Scheda tecnica Scarica

Link URL