PCIMX6QP4AVT2AB datasheet(88/166 Pages) NXP

Il numero della parte	PCIMX6QP4AVT2AB

Spiegazioni elettronici	i.MX 6DualPlus/6QuadPlus Automotive Applications Processors

PDF	166 Pages

Scroll/Zoom	100%

Produttore elettronici	NXP [NXP Semiconductors]

Homepage	http://www.nxp.com

Logo

88 / 166 page

i.MX 6DualPlus/6QuadPlus Automotive Applications Processors, Rev. 3, 11/2018

NXP Semiconductors

Electrical Characteristics

Figure 48. RGMII Receive Signal Timing Diagram Original

Figure 49. RGMII Receive Signal Timing Diagram with Internal Delay

4.12.6

Flexible Controller Area Network (FlexCAN) AC Electrical

Specifications

The Flexible Controller Area Network (FlexCAN) module is a communication controller implementing

the CAN protocol according to the CAN 2.0B protocol specification.The processor has two CAN modules

available for systems design. Tx and Rx ports for both modules are multiplexed with other I/O pins. See

the IOMUXC chapter of the i.MX 6DualPlus/6QuadPlus reference manual (IMX6DQPRM) to see which

pins expose Tx and Rx pins; these ports are named FLEXCAN_TX and FLEXCAN_RX, respectively.

4.12.7

HDMI Module Timing Parameters

4.12.7.1

Latencies and Timing Information

Power-up time (time between TX_PWRON assertion and TX_READY assertion) for the HDMI 3D Tx

PHY while operating with the slowest input reference clock supported (13.5 MHz) is 3.35 ms.

PCIMX6QP4AVT2AB Scheda tecnica(PDF) 88 Page - NXP Semiconductors