G/COE/Product Technical Data Sheets/425.431.438.1433.1437

Features



Tape demonstrated no evidence of wear through after Taber Abrasion at 1000

cycles, using CS-10 wheel and 1000g load when applied to S-37 mounting sheet.





Thick caliper UHMW polyethylene tape for extended service life as a protective

surface against tough impact wear or sliding applications.



Outstanding abrasion resistance so will outwear PTFE and other materials in

sliding applications.



Low coefficient of friction characteristics is exceeded only by PTFE.



UHMW-PE tape can be used where lubrication is not possible because of

contamination.



Rubber Adhesive provides good initial tack for immediate bonding to material

surface.



Liner makes it ideal for fabricating or die-cutting into various lengths and shapes.

Application Ideas



Noise reduction between dissimilar parts.



Reduce squeaks, rattles and other noises that occur with movement



Lining of conveyer guide rails, tank and bin liners, and discharge chutes.



Protection for aluminum sheets on stretch forming presses.



Liners for Spray booths.



Slick surface for easy glide for drawers and cabinets.

Storage

Store under normal conditions of 60° to 80°F (16° to 27°C) and 40 to 60% relative

humidity in the original packaging material.

Shelf Life

To obtain best performance, use this product within 18 months from date of

manufacture.

Technical

Information

The technical information, recommendations and other statements contained in this document are

based upon tests or experience that 3M believes are reliable, but the accuracy or completeness of

such information is not guaranteed.

Product Use

Many factors beyond 3M’s control and uniquely within user’s knowledge and control can affect the

use and performance of a 3M product in a particular application. Given the variety of factors that

can affect the use and performance of a 3M product, user is solely responsible for evaluating the

3M product and determining whether it is fit for a particul

ar purpose and suitable for user’s method

or application.

Warranty,

Limited Remedy,

and Disclaimer

Unless an additional warranty is specifically stated on the applicable 3M product packaging or

product literature, 3M warrants that each 3M product meets the applicable 3M product

specification at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR

CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED

WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR

PURPOS OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF

DEALING, CUSTOM OR USAGE OF TRADE. If the 3M product does not conform to this warranty,

then the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product or refund of

the purchase price.

Limitation of

Liability

Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M

product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory

asserted, including warranty, contract, negligence or strict liability.

This Industrial Adhesives and Tapes Division product was manufactured under a quality system registered to ISO 9001:2000 standards.

Industrial Business

Industrial Adhesives and Tapes Division

3M Center, Building 220-3S-06

St. Paul, MN 55144-1000

Recycled Paper

3M is a trademark of

3M Company.

800-362-3550 · 577-369-2923 (Fax)

40% pre-consumer

Printed in U.S.A.

www.3M.com/industrial

10% post-consumer

©3M 2016