ADP5041ACPZ-1-R7 datasheet(6/40 Pages) AD

6 / 40 page

ADP5041

Data Sheet

Rev. B | Page 6 of 40

INPUT AND OUTPUT CAPACITOR, RECOMMENDED SPECIFICATIONS

Table 5.

Parameter

Symbol

Test Conditions/Comments

Min

Typ

Max

Unit

INPUT CAPACITANCE (BUCK)1

CMIN1

TJ = −40°C to +125°C

4.7

μF

OUTPUT CAPACITANCE (BUCK)2

CMIN2

TJ = −40°C to +125°C

μF

INPUT AND OUTPUT CAPACITANCE3 (LDO1, LDO2)

CMIN34

TJ = −40°C to +125°C

0.70

μF

CAPACITOR ESR

RESR

TJ = −40°C to +125°C

0.001

1 The minimum input capacitance should be greater than 4.7 μF over the full range of operating conditions. The full range of operating conditions in the application

must be considered during device selection to ensure that the minimum capacitance specification is met. X7R and X5R type capacitors are recommended, whereas

Y5V and Z5U capacitors are not recommended for use with the buck.

2 The minimum output capacitance should be greater than 7 μF over the full range of operating conditions. The full range of operating conditions in the application

must be considered during device selection to ensure that the minimum capacitance specification is met. X7R and X5R type capacitors are recommended, whereas

Y5V and Z5U capacitors are not recommended for use with the buck.

3 The minimum input and output capacitance should be greater than 0.70 μF over the full range of operating conditions. The full range of operating conditions in the

application must be considered during device selection to ensure that the minimum capacitance specification is met. X7R and X5R type capacitors are recommended,

whereas Y5V and Z5U capacitors are not recommended for use with LDOs.

ADP5041ACPZ-1-R7 Scheda tecnica(PDF) 6 Page - Analog Devices

ADP5041ACPZ-1-R7 Scheda tecnica(HTML) 6 Page - Analog Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40

Scheda tecnica Scarica

Link URL