STSPIN32G4TR datasheet(21/48 Pages) STMICROELECTRONICS

Il numero della parte	STSPIN32G4TR

Spiegazioni elettronici	High performance 3-phase motor controller with embedded STM32G4 MCU

PDF	48 Pages

Scroll/Zoom	100%

Produttore elettronici	STMICROELECTRONICS [STMicroelectronics]

Homepage	http://www.st.com

Logo

21 / 48 page

5.2.2

Minimum deadtime

The device guarantees a minimum deadtime value of tDT, imposing a delay between the turn-off of an external

MOSFET and the turn-on of the complementary one.

The deadtime is not added to the one eventually imposed by the MCU, as shown in Figure 15.

Figure 15. Deadtime timing (with interlocking enabled)

INHx

INLx

GHSx

GLSx

tDT

The feature is disabled clearing the DTMIN bit (see Table 17) or when the interlocking is disabled (see

Section 5.2.1 ).

5.2.3

Sink/source current

The output stage of the gate drivers provides a maximum sink/source capability of 1 A.

The voltage to current characteristics of the gate driver output stage is described by Figure 26 and Figure 27.

When in UVLO condition, the gate drivers keep their outputs low with the maximum current capability available.

Figure 16. Low-side gate driver output characteristic in UVLO range

Figure 17. High-side gate driver output characteristic in UVLO range

STSPIN32G4

Gate drivers

DS13630 - Rev 1

page 21/48

STSPIN32G4TR Scheda tecnica(PDF) 21 Page - STMicroelectronics