QPB9348

Dual Channel Switch LNA Module

Datasheet Rev. C, June 27, 2019 | Subject to change without notice

10 of 13

www.qorvo.com

®

Recommended PCB Layout Pattern

Notes:

1. All dimensions are in millimeters. Angles are in degrees.

2. Use 1 oz. copper minimum for top and bottom layer metal.

3. Via holes are required under the backside paddle of this device for proper RF/DC grounding and thermal dissipation. We recommend a 0.35mm

(#80/.0135") diameter bit for drilling via holes and a final plated thru diameter of 0.25 mm (0.0

1”).

4. Ensure good package backside paddle solder attach for reliable operation and best electrical performance.

Package Marking and Dimensions

Marking: Pin 1 Indicator and Qorvo Logo

Part Number

– QPB9348

Trace Code

– Assigned by sub-contractor

Notes:

1. All dimensions are in millimeters. Angles are in degrees.

2. The terminal #1 identifier and terminal numbering conform to SPE-000677.

3. Contact plating: ENEPIG