USB7002 datasheet(28/56 Pages) MICROCHIP

28 / 56 page

USB7002

DS00002670G-page 28

 2022 Microchip Technology Inc. and its subsidiaries

6.0

DEVICE CONFIGURATION

The device supports a large number of features (some mutually exclusive), and must be configured in order to correctly

function when attached to a USB host controller. Microchip provides a comprehensive software programming tool,

MPLAB Connect Configurator (formerly ProTouch2), for OTP configuration of various USB7002 functions and registers.

All configuration is to be performed via the MPLAB Connect Configurator programming tool. For additional information

on this tool, refer to the MPLAB Connect Configurator programming tool product page at http://www.microchip.com/

design-centers/usb/mplab-connect-configurator.

Additional information on configuring the USB7002 is also provided in the “Configuration of the USB7002/USB705x”

application note, which contains details on the hub operational mode, SOC configuration stage, OTP configuration, USB

configuration, and configuration register definitions. This application note, along with additional USB7002 resources,

can be found on the Microchip USB7002 product page at www.microchip.com/USB7002.

Note:

The USB7002 requires external firmware to operate. Refer to the “Configuration of the USB7002/

USB705x

” application note for additional information.

Note:

Device configuration straps and programmable pins are detailed in Section 3.3, Configuration Straps and

Programmable Functions.

Refer to Section 7.0, Device Interfaces for detailed information on each device interface.

USB7002 Scheda tecnica(PDF) 28 Page - Microchip Technology