Rev Date: 6/28/2022

10

www.seielect.com

This specification may be changed at any time without prior notice.

marketing@seielect.com

Please confirm technical specifications before you order and/or use.

CSRF Series

Foil on Ceramic Current Sensing Chip Resistor

Stackpole Electronics, Inc.

Resistive Product Solutions

The 102ºC heat rise shown here would indicate there will be additional thermal reduction techniques needed to keep this

part under 105 ºC total hot spot temperature if this part is to be used at 0.75 watts of power. However, this same part at

the usual power rating for this size would have a heat rise of around 72ºC. This additional heat rise may be dealt with

using wider conductor traces, larger solder pads and land patterns under the solder mask, heavier copper in the

conductors, vias through PCB, air movement, and heat sinks, among many other techniques. Because of the variety of

methods customers can use to lower the effective heat rise of the circuit, resistor manufacturers simply specify power

ratings with the limitations on ambient air temperature and total hot spot temperatures and leave the details of how to best

accomplish this to the design engineers. Design guidelines for products in various market segments can vary widely so

it would be unnecessarily constraining for a resistor manufacturer to recommend the use of any of these methods over

another.

Note: The final resistance value can be affected by the board layout and assembly process, especially the size of the mounting pads and the amount

of solder used. This is especially notable for resistance values ≤ 50mΩ. This should be taken into account when designing.

RoHS Compliance

Stackpole Electronics has joined the worldwide effort to reduce the amount of lead in electronic components and to meet the various

regulatory requirements now prevalent, such as the European Union’s directive regarding “Restrictions on Hazardous Substances”

(RoHS 3). As part of this ongoing program, we periodically update this document with the status regarding the availability of our

compliant components. All our standard part numbers are compliant to EU Directive 2011/65/EU of the European Parliament as

amended by Directive (EU) 2015/863/EU as regards the list of restricted substances.

“Conflict Metals” Commitment

We at Stackpole Electronics, Inc. are joined with our industry in opposing the use of metals mined in the

“conflict region” of the eastern

Democratic Republic of the Congo (DRC) in our products. Recognizing that the supply chain for metals used in the electronics industry

is very complex, we work closely with our own suppliers to verify to the extent possible that the materials and products we supply do

not contain metals sourced from this conflict region. As such, we are in compliance with the requirements of Dodd-Frank Act regarding

Conflict Minerals.

RoHS Compliance Status

CSRF

Foil on Ceramic Current Sensing

Surface Mount Chip Resistor

SMD

YES

100% Matte Sn over Ni

Jul-04

04/27

Lead-Free

Effective Date

Code

(YY/WW)

Standard

Product

Series

Description

Package /

Termination

Type

Standard

Series

RoHS

Compliant

Lead-Free Termination

Composition

Lead-Free

Mfg. Effective Date

(Std Product Series)