L99ASC03G datasheet(29/70 Pages) STMICROELECTRONICS

Il numero della parte	L99ASC03G

Spiegazioni elettronici	Brushless / sensorless 3-phase motor pre-driver for automotive applications

PDF	70 Pages

Scroll/Zoom	100%

Produttore elettronici	STMICROELECTRONICS [STMicroelectronics]

Homepage	http://www.st.com

Logo

29 / 70 page

DocID029080 Rev 2

29/70

L99ASC03G

Device description

Figure 13. Persistent watchdog failure (VBAT Standby Mode entered after 15 watchdog faults)

Figure 14. Persistent TSD2 failure (VBAT Standby Mode entered after 7 VDD turn-offs)

2.19

Serial peripheral interface (ST SPI standard)

A 16-bit ST SPI is used for bi-directional communication with an external microcontroller.

Through SPI it is possible to trigger the watchdog, control the operating modes, adjust some

device parameters and read out diagnostic information of several device modules.

During standby modes, the SPI is generally deactivated.

The SPI has to be driven in the following mode:

VDD

Short circuit at VDD turn-on

VDDFAIL = 1

Read & Clear VDDFAIL

Temperature

Tj>TSD2 for 7 times

(VDDR = 111)

TSD2 = 1

Read & Clear TSD2

Table 6. Forced VBAT standby mode (continued)

Source

Cause

Diagnosis

Clear error flag

VDD

Forced

VBAT Standby

tTSD

Counter

L99ASC03G Scheda tecnica(PDF) 29 Page - STMicroelectronics